For Sale & Wanted

Welcome to our classified adverts pages. If you'd like to advertise a machine or accessories here, or would like to place a Wanted advert, click one of the buttons below. You'll need to be logged in first; If you don't yet have an account with us, you will be asked for an email address.
 

Asking price: £750.00

For Sale: BCA Mk.3 Mini Jig Borer/Co-ordinate Driller mounted on the maker's cabinet stand and in excellent condition. Unlike most examples of the type, this is equipped with not only a full set of genuine imperial collets but a collet-mounted drill chuck, four other collet-mounted cutter holders, two Lushington boring heads, a set of precision length bars to complement the table-feed micrometer dials, two original table T-slot clamps, a light unit and the correct spindle-bearing adjustment C-spanners.

Location: Trowbridge, Wiltshire, United Kingdom
Asking price: £750.00

Willson 7.5-inch lathe - single-phase motor. This very strongly-built Willson is just as the last owner left it - with all the accessories, tooling and fittings included. The lathe has a full screwcutting and feeds gearbox, power cross feed and clutched drive to the spindle. Accessories include a thread-dial indicator, 4-way toolpost, 3-jaw chuck and a high-quality Taylor conical-scroll, self-centring 4-jaw chuck. £750 or offers. Details of Willson lathes here

Location: United Kingdom
Asking price: £1,850.00

Myford Super 7B lathe 3.5" x 19" hap-bed, backgeared and fitted with a screwcutting gearbox and spindle clutch. Owned by a professional engineer who used it for model making. Still in its maker's original paint finish and carefully maintained.

Location: Battersea, South London, United Kingdom
Asking price: £1,350.00

Myford ML7B Tri-Leva lathe 3.3" x 20" gap-bed, backgeared and fitted with a screwcutting gearbox. Owned from new by a professional engineer who used it for model making. The lathe retains it's original maker's paint finish and has clearly been carefully looked after. The lathe has been upgraded with a Myford Super carriage assembly (Including the cross and top slides with engraved zeroing micrometer dials) and a Super 7 tailstock. The Tr-Leva unit acts as both a clutch and a means of instantly changing spindle speeds.

Location: Battersea, South London, United Kingdom
Asking price: £2,950.00

For Sale Watchmaker's Lathe:  Boley & Leinen 8 mm "Reform" Bed length 260 mm, a centre height 50 mm. Complete with an extensive range of accessories and a Flume F53 motorised base. In  exceptionally good condition with only the graver rest showing minor chrome-plate peeling. The Flume base allows the lathe to be mounted either left or right-handed and the variable-speed, forward and reverse motor to be set in front or behind the bed.

Location: Hereford, United Kingdom
Asking price: £3,250.00

For Sale: Colchester Master 2500 long-bed lathe. This lathe is in overall good condition and has been converted to single- phase using a 3 h.p. motor. The coolant pump is the original 3-phase unit and is disconnected. Fitted with dual inch/metric dials, a 4-way self-indexing toolpost and rear-mounted single-position toolpost for parting off, etc.

Location: Shaftesbury, United Kingdom
Asking price: £1,300.00

Warco WM240 variable-speed lathe (30 to 3250 r.p.m.) mounted on the maker's stand with a full-length splashback, two drawers and two cupboards. Bought new from Warco in 2018 and used only for model engineering. 120 mm centre height and 400 mm between centres. Complete with all the original accessories: 125 mm 3-jaw chuck, 125mm independent 4-jaw chuck, fixed steady, travelling steady.

Location: Bromely, Kent, United Kingdom
Asking price: £3,650.00

Reluctantly for sale is my excellent Colchester Bantam 1600 centre lathe which is in fantastic, original condition - other than a few paint chips touched in here and there. An Imperial machine but includes the metric transposing changewheels. The bed and slide ways are not showing any wear or damage and all movements are smooth without play. Fitted with a G.E.C 2HP 1.5 KW 4 pole motor and a high quality IMO Inverter (VFD) wired to a Newton Tesla control pendant.

Location: Oakham, RUTLAND, United Kingdom
Asking price: £1.00

Genuine maker's accessories for the Hardinge HLV-H Toolroom lathe
From the photographs you will see: 127 gear and banjo for conversion to cut metric threads
Cut-off attachment
Follow rest (travelling steady)
Radius Turning Attachment. Brand new, never unwrapped
Taper Turning Attachment
2-inch collet closer and 12 used collets to suit (only 4 pictured)
In the photo of all parts together, there is also a second-hand draw tube for use with collets>

Location: Marlborough, United Kingdom
Asking price: £1,450.00

Boxford ME10A lathe. A late-model 5" x 24" with a screwcutting gearbox, power cross feed and mounted on the maker's compact stand. In fie original order and in its original maker's finish. Unlike all other Boxford models, this example is fitted with the maker's spindle clutch that makes using the lathe so much easier. Fitted with a T-slotted cross slide. 5-inch Burnerd 3-jaw chuck with both sets of jaws, the correct half-depth body 4-inch Burnerd independent 4-jaw chuck.

Location: Devon-Cornwall border, United Kingdom
Asking price: £475.00

Adept Miniature Powered Shaper. A unique opportunity - this is an original, unused and previously unassembled version of the rare Adept miniature shaper. Complete with a copy of the maker's assembly instructions and drawing. Full details of  Adept shapers and the story of the powered version machine can be found here  Am willing to pack carefully and post.

Location: Devon-Cornwall border, United Kingdom
Asking price: £1,150.00

For Sale: Pultra 15/90 high-precision lathe. This is the rare, larger Pultra with a 3.5" centre height and taking 20 mm through the headstock spindle. Mounted on the maker's underdrive, 9-speed Mardrive stand that gives 135 to 3265 r.p.m.. The lathe is complete with a screw-feed compound slide rest assembly and the very seldom found screwcutting attachment complete with a separate top slide - this having the Carden drive shaft, a set of changewheels and a screwcutting chart.

Location: Farnham, United Kingdom

Pages