A Perris lathe in excellent condition, very low hours and nearly always used on brass so very light use with no saw marks or damage to the bed at all and still in the original paintwork.

High quality IMO Jaguar VXR3A-1 single phase inverter with a Gamak 0.12KW motor for a very quiet and smooth drive system giving a range of speeds from 20 to 1500 RPM.

Front and rear quick change toolposts with 12 toolholders which fit either toolpost. 9 standard, 1 extended, 2 boring bar type 1 drilled to take a 6mm bar (can be opened out  if required)the other undrilled to suit whatever size you prefer. Toolholders will take upto 5/16 bits and it has a 6 Cleveland unground blanks of this size and a further mixture of bits to suit. Cross drilling/milling block that fits onto the toolpost.

3 jaw, 4 jaw, er collet chuck with some high quality collets, and 3 jaw drill chuck for use on the main spindle(excellent for small diameters where you dont want to keep swapping collets) Faceplate with clamps.

Taper turning attachment, custom made and capable of +/- 3inch of taper per foot. Micrometer adjustable and capable of nearly 4 inches of travel.

Rear mounted Mitutoyo DTI for ease of setting cuting depth, if you swap to a digital DTI you get a DRO system!

A pair of steadies both of high capacity.

A Jacobs 0 to 1/4 drill chuck and a pair of ctrs.

All mounted on a very heavy mahogany and oak case.