For Sale: a superb, one-owner and lightly-used Myford ML7 lathe 3.5" x 20" gap-bed, backgeared and screwcutting. Used only for model engineering the lathe is a late-model example with the larger Super 7 leadscrew and its bedways showing the original machining marks.
Welcome to our classified adverts pages. If you'd like to advertise a machine or accessories here, or would like to place a Wanted advert, click one of the buttons below. You'll need to be logged in first; If you don't yet have an account with us, you will be asked for an email address.
You can narrow down your search using the options below:
For Sale: IXL lathe backgeared and screwcutting with a 5.5-inch centre height and around 20 inches between centres and fitted with a T-slotted cross slide to take a milling slide. Stored unused in a dehumidified garage, unused for the last 29 years.
Alpine Mill/Drill. A nice compact machine ideal for vertical milling and accurate co-ordinate drill. This is the best of its type with a bevel gearbox at the base of the column that allows the head to be elevated without losing alignment. The quill has both rapid downfeed and a fine fed through worm-and-wheel gearing. Spindle speeds range from 110 to 1750 r.p.m. Comes apart easily for transport. In use at present and can be seen working on my single-phase supply. Only selling to make room for a larger miller and a bargain at £450 for a quick sale.
For Sale: Tom Senior “Junior” vertical/horizontal milling machine. Carefully used from new and in fine original condition. Complete with power feed to the table (with oil-bath gearbox), vertical head, the seldom-found slotting heads, all the horizontal parts - overarm, cutter arbor and drop bracket, horizontal overarm and arbour - slotting attachment, collet chuck and collet set, slitting saw cutter holder, fly cutter, table T-nuts and a coolant pump. 1-phase motor (unused since a rewind) with a safely, no-Volt release push-button starter.
Excel bench top die filing machine. In full working order and fitted with a 1-phase motor. 12 inches (300 mm square) the table can be tilted + or - 10 degrees. Also included are a work hold-down finger, back roller file support and a piercing/fret sawing attachment. Weight approximately 40 kg. Collection only
For Sale: Clarkson Mk.1 tool and cutter grinder together with most of the essential attachments including centres, arbors, sleeves and a hard-to-find “drill and tap lead grinding attachment” in little-used condition. Fitted with new head bearings six months ago and little used since. New grinding wheels just are fitted and the machine has a proper industrial-class light unit and the maker’s instruction book.
For Sale: Drummond B-Type flat-bed, 3.5” x 15” gap-bed, backgeared, screwcutting and with auto-disengage to the carriage drive; serial No. 11-77 built 1912-1921. In perfect working order - and only two owners from new. The first owner was a development engineer-cum-toolmaker and had the lathe from new until his death in 1968.
Antique Brown Brothers lathe. Around 4.5" centre height and 36” between centres. Gap-bed, backgeared, screwcutting and, interestingly, power cross feed driven by a rear-mounted power shaft connected to the lathe's changewheels. Having stood unused for a number of years the lathe needs cosmetic refurbishment -but is complete, original and well equipped.
For Sale: a well-equipped BTM watchmaker's lathe. English-made and complete with: compound screw-feed slide-rest assembly, three tailstocks one with lever feed, the correct maker's countershaft, two beds - one straight the other with a gap - 44 wire collets, 5 cone collets, ring-scroll precision 3-jaw chuck with face-reversible jaws, box chuck, double roller filing rest, carrier chuck (drive plate), saw table and a Jacot drum. £750 Can pack and post world-wide at cost.
For Sale: Cowells 90 ME miniature precision model engineer's lathe and accessories in excellent carefully-used condition. 1.75” centre height by 8” (44 mm x 200 mm) between centres with backgears, screwcutting and a gap bed. Genuine maker’s accessories include: 4-jaw Burnerd chuck, faceplate, fixed steady, travelling steady, collet chuck, four imperial collets, sliding tailstock die holder for 1-inch dies, three Morse centres and five screwcutting changewheels.
For Sale: Warco 30 vertical miller and co-ordinate drilling machine. Mounted on the maker’s stand with a chip tray this useful and versatile vertical miller has had only light private use from new. The No.3 Morse taper is driven by both a fine-feed handwheel though worm-and-wheel gearing and a rack-and-pinion quick-action drilling lever. Complete with an indexing and diving unit with tailstock, two machine vices, a dial indicator on the spindle down-feed , drilling chuck and all the other small items, multi-faceted cutter, etc., inside the cabinet stand. 1-phase electrics.
For Sale: Boxford 10-20 Geared-head lathe. (5.19-inch centre height). This lathe is from Boxford’s late-model “Industrial” (rather than training) range and has an excellent specification with an all geared head, induction hardened bed, power cross feed, full quick-change screwcutting and feeds gearbox, D1-3” spindle nose, 35 mm spindle bore, fully enclosed leadscrew and mounted on the maker's cabinet stand with a full-length splash back and lockable storage shelves.
A rare Boley watchmaker’s lathe vertical slide complete with the correct indexing attachment and division plate. £475 Details of Boley accessories here
SOLD: Myford Super 7B lathe with power cross feed. Mounted on the maker's industrial cabinet stand with levelling blocks and a full-length splash-back.
Dore Westbury Mk.1 vertical milling machine. This versatile miller has a No. 2 Morse taper head with both fine down feed by worm-and-wheel gearing and a rapid-action lever-driven feed through rack-and-pinion gearing. The head can be moved in and out, rotated left and right and ,moved up and down - enabling it to tackle a wide variety of jobs. Drive is from a single-phase motor to a head with speed-reducing epicyclic gearing built in. Need the room so just £275.
Mikron Vertical and Horizontal Precision Milling machine. In full working order, this is a fine example of Mikron engineering mounted on the maker’s No. 93 heavy and stable cast-iron stand. Unusually, all the horizontal and vertical milling accessories are present and this particular example has survived with the maker’s slideway scraping marks intact and minimal play in the slideway feed screws and nuts - it has obviously had a very easy life. Table 360 mm x 115 mm with screw-feed travels of 180 mm longitudinally, 70 mm across and 135 mm vertically.
For Sale: Prazima watchmaker’s lathe as a boxed set in the maker’s fitted case. Complete, in full working order and ready to use. Accessories include: lever-action compound slide rest, two tailstocks, precision pump-centre faceplate with clamps, 31 wire collets, a set of five step chucks (cone collets), 13 rose cutters, a set of five ring step chucks (fir-tree collets), wax chucks, carrier chuck, roller filing rests, collet-mounted faceplate, four sizes of hand T-rest, self-centring drilling attachment, safety pulley and box chuck, etc.
For Sale: Myford Super 7B lathe 3.5” x 19” gap-bed, backgeared and fitted with a screwcutting gearbox and power cross feed. The lathe was purchased new by the deceased owner in June 1989 and, having been used for clockmaking, has only ever had very light use.
For sale: high-precision Rivett 608 PC toolroom lathe serial number 1339 (built 1944) mounted on the original maker's "Oil Pan Stand with Speed Box Drive" - this giving two instantly-changed speeds through a clutch mechanism. Combined with the final belt drive and backgear a total of 12 speeds is available. A new 3-phase motor just fitted.
DRUMMOND METAL TURNING 3 ½ “ BENCH LATHE Mk 2 B-Type Serial No. 3401 3.5" x 15" gap-bed, backgeared, screwcutting and fitted with automatic disengage of the carriage feed. Manufactured between 1912 and 1921. Equipment included with this robust “work-ready” machine: 240 volt single-phase motor with No-Volt safety release driving through V-belts to give 12 spindle speeds. A robust oak supporting bench with a drawer containing a comprehensive selection of turning tools.
For Sale: Adept Model 2A hand-operated shaper. Complete but long-term stored and so an ideal candidate for a straightforward yet interesting restoration. The larger of the two Adept hand-operated shapers made, the 2A has a useful 7" x 6" table with vertical T-slots 6-inches high and a ram travel of 6.25". £175
Phone: 07803-330139 Details of these appealing and highly effective little Adept shapers here
For Sale: Cowells 90 ME miniature precision model engineer's lathe and accessories in pristine, little-used condition. 1.75” centre height by 8” (44 mm x 200 mm) between centres with backgears, screwcutting and a gap bed. Purchased 12 years ago from a railway modeller, I have not used it since apart from cleaning and oiling.
For Sale: Warco VMC vertical miller - a superb, little-used 2012 machine mounted on the maker's stand with a storage cupboard and chip tray and one-shot lubrication to the slideways. Single-phase electrics with a push-botton, no-volt release safety starter and an emergency stop button. All imperial graduations and fitted with an R8 spindle that takes inexpensive and readily available tooling as used on Bridgeport models.
For sale is my fantastic 6.5" x 24" Churchill Cub Mk. 3 lathe with 3/4" bore through headstock. Well equipped with: taper turning attachment. 3-jaw 6" chuck, 4-jaw 8" chuck, collet chuck with collets from 1/8" - 3/4" in 1/16" increments, fixed and travelling steadies, a precision Multifix Type A toolpost with six tool holders (including a retractable threading tool and parting tool) - value approx £700 - cutting tools, tailstock drill chuck, quality live centre, changewheels, 12" faceplate, catchplate for turning between centres.
For Sale: a Centec 2A universal milling machine mounted on the maker's stand with chip tray and equipped with the Mk.3 swivelling vertical head - this having both wheel-operated fine and lever-action drilling feeds along the tool axis. A 4.75-inch depth raiser block is fitted, this remaining in place when changing from horizontal to vertical mode. The machine has been totally refurbished, stripped and repainted and fitted with a new 0.75kW 3-phase motor controlled by a variable-speed inverter running from the domestic 1-phase supply.
Cowells 90 miniature precision lathe 44mm centre height and 200mm between centres. One private owner from new in the 1980s; only used intermittently for very light model engineering and hence in very good condition. Gap-bed, backgeared and fitted with a set of screwcutting changewheels.
Meyer Burger UW1 Model K
Emco Unimat Mk.1. Still in its original state, one of the very first manufactured in 1954. A true collectors item.
Some of the features:
Comes complete in its original box with all the basic tools.
In its original black crackle finish.
Standard 40Watt original motor - still working perfectly
Original bakelite switch and plug.
SOLD: Myford ML7 lathe 3.5" x 19" with a genuine Myford taper turning attachment (in very good condition), an original "Sparey" screwcutting gearbox and the superior type of Super 7 tailstock. Mounted on the maker's stand with deep chip tray and levelling blocks. 240v single phase electrics. Front and rear quick-change toolposts with 6 tool holders to fit both posts. Two 3-jaw chucks, 4-jaw chuck, catchplate, fixed steady, travelling steady and a thread-dial indicator.
Myford Super 7B Lathe 3.5" x 19" gap-bed, backgeared and fitted with a screwcutting gearbox, power cross feed an induction hardened bed and mounted on a good metal stand with the the maker's deep chip tray and levelling blocks. This is a very high specification Super 7 in perfect working order and one private owner from new.
SOLD: CVA Toolroom lathe MK 1A with a full screwcutting and feeds gearbox and power sliding and surfacing feeds. Complete with a 6-inch diameter 3-jaw chuck, travelling steady, 4-way toolpost and micrometer dials on the carriage-traverse and tailstock handwheels. Also has a micrometer-adjustable taper turning unit fitted - though the connecting rod is missing. The lathe runs smoothly and very quietly – an absolute pleasure to use due to its high quality. 3-phase electrics that run fine from a digital inverter (not included).
Tom Senior M1 horizontal / vertical milling machine complete with all fittings to convert from vertical to a horizontal configuration. 240-volt single phase motor and complete with a Clarkson Auto-Lock chuck and collet set for vertical head together with a selection of cutters (some of which are brand new), a factory machine vice and a light unit. Has no wear or tool marks on bed and the vice is also in exceptionally good condition.
Myford VM-E - Bought from new and only used for hobby light engineering by an experienced user. Hence, in excellent (well-loved) condition. Extras Includes:
Kerry AG lathe in good working condition. All-geared headstock with spindle clutch and a full screwcutting gearbox with power sliding and surfacing feeds. 240v single-phase electrics. Comes with a very good, nearly new 3-jaw chuck, keyless tailstock chuck, tailstock revolving center, built-in thread-dial indicator, a 4-way toolpost and a number of cutting tools. The lathe is mounted on a stand that I made from 2" box section steel with a built-in coolant tray. However, the lathe can be bench mounted if needed.
Seneca Fall “Star” lathe 6-inch centre height by 26 inches between centres, backgeared and screwcutting. This lathe has been in the family for many years (more than I have!). It belonged to my late uncle and I spent many hours working on it when I was a schoolboy, mainly making parts for speedway bikes. I bought it from my uncle's family when he died and installed it in my garden shed. It was in use until a couple of years ago but since then I have built a much larger workshop and have other lathes - so I really don't use the "Star" any longer.
Plastic Injection Moulding Machine - bench mounting. Hydraulically operated from a commercial single-phase, 240 volt (Savery Ltd) power-pack, 3/4 h.p. 55 bar working pressure. The 600-Watt heaters are regulated by an adjustable temperature controller and monitored by a built-in barrel thermocouple. The pellets can be fed from a simple automatic hopper feed for shot weights up to 10 gm or manually via a feed tube for heavier mouldings when the front tie rods are used to support the additional ram forces.
Dore Westbury Vertical Milling Machine. This fine example was made some years ago by a gold-medal winning model engineer – and then used, very carefully, in the building of his models. The miller really is superbly made and finished with no play and only a small amount of backlash in the table feedscrews. I have recently cleaned, inspected and tested the machine and it performs perfectly – I was unable to find any faults. The table and machine vice are unmarked, as are the handles and dials.
A very useful, compact but powerful Mill-Drill - unfortunately for sale due to downsizing. Driven by a single-phase, 240 volts 1.5 HP motor. The large table size of 730 x 210 mm enables quite large work to be machined. Fitted with an R8 taper spindle (and so access to high-quality but inexpensive and plentiful Bridgeport-type tooling), the head has the option of both a quick, lever-action down feed for drilling or a wheel-operated slow feed with more control for milling. A gear box enables 6 speeds to be selected from 80-1650 r.p.m.
Perfect working condition Jones and Shipman Model 1400 hydraulic surface grinder for sale to a good home. This machine is capable of grinding work pieces up 24" long by 8" wide to a high degree of accuracy and surface finish. It is constructed on relatively simple lines and is basically similar in design to the well-known 540 model - but with a larger grinding capacity. Hydraulically-operated table traverse, automatic cross-traverse, and power rise and fall to wheel head.
Boxford "Union" Pillar Drill Model PD8. This strong, compact drill is the sought-after type with reduction gearing in the head that gives a very wide speed range with eight in total from 82 to 2900 r.p.m. 3-phase electrics so ideal for conversion to variable-speed inverter drive in which case the bottom speed might go as low as 10 r.p.m and the top to over 4000 r.p.m. Light school use only. Details of Boxford drills here
Startrite 351 bandsaw. Serial Number: 137931. The price includes a Health & Safety "Local Exhaust Ventilation" (LEV) booth- your choice of either a unit which requires fitting to a larger LEV system or a unit with extraction motor at the back of the LEV booth. 3-phase electrics. The machine has had light school use only.
All buyers will need to fill out an asset disposal form, read, understand and agree to recommendations made in the form. You are welcome to arrange a visit prior to sale.
Sold for the asking price - my lovely Centec 2B milling machine, which I have owned approximately 10 years. It has seen little use in this time, but has performed well and reliably when expected to. The machine is in very good order all around, with little backlash and smooth, quiet operation. I am not aware of any faults in the machine and expect a buyer will be delighted with it. It runs well in all gears and all speeds.
Two RJH System 2000 vertical Band-sanders available. These are compact, modern machines that have had school use only and both are in very similar condition. Price is per machine but a discount will be offered if both are purchased together.
Serial Number: 15689 and 15688
Type: AN2SVT DE2
Belt/wheel size 1090x150
Built in extraction with filter bag and refuse tray.
Arboga U2508 Vertical Miller. U2508 Vertical Miller. A high-class Swedish machine with power feed to the 22” x 10” table that has 6.5 inches of cross travel and longitudinally of 15.5 inches with travel measurements by an Ortec 3-axis DRO. The U2508 is the heavier, more robust Arboga miller introduced during the 1970s. The vertical head swivels and holds a No.3 Morse taper spindle in a quill with a travel of 5.5”. Spindle feed is controlled by both a fine-feed handwheel and a quick-action lever for drilling.
For Sale: an Antique American Barnes Model 41/2 backgeared and screwcutting “twin-leadscrew” lathe. 4.5-inch centre height, 25 inches between centres. All original but long-term unused and a good restoration project. Complete with countershaft assembly and matching 3-step headstock pulley. £175 Phone: 07971-326323 or 01384-288434 Proceeds of this sale go to Charity. Please email for more details Details of Barnes lathes here and here
RJH Gryphon double ended bench polisher. An industrial-class machine but single-phase electrics with push-button, No.Volt release starter. Fitted with 200 x 25 x 20 polishing mops and guards. Light school use only.
All buyers will need to fill out an asset disposal form, read, understand and agree to recommendations made in the form. You are welcome to arrange a visit prior to sale.
Harrison Union Graduate Wood Lathe Serial Number: 137911. Heavy, all-cast-iron construction with bowl-turning attachment, dust extraction, faceplate, standard T-rests and 6 chisels. Light school use only and in suberb condition. 3-phase electrics so ideal for conversion to variable-speed inverter drive. Full details of Graduate lathes here
Hegner Multicut S2 scroll saw. A professional-class machine on 1-phase electrics. Light school use only and in perfect working order. Model ID: 65869/64.
All buyers will need to fill out an asset disposal form, read, understand and agree to recommendations made in the form. You are welcome to arrange a visit prior to sale.
A quantity of 14 Record metal vices with wooden plates attached with 75 mm (3-inch) capacity. A quantity of 12 Record wood-holding bench vices that are designed to fit flush against the front face of a workbench (the wooden top blocks are included). The price is per vice but a discount will be offered if a quantity is purchased.
For Sale: Harrison M250 lathe with a Rishton Powered Vertical Milling Head with both in outstanding, little-used condition. A single-phase, all-metric machine purchased new from the factory by the only user and employed solely in his model engineering hobby. 145 mm (5.7") centre height by 750 mm (30") between centres with all-geared headstock, full screwcutting and feeds gearbox, power cross feed, hardened bed and brand new, recently-fitted DRO system.
I'm looking for a Boxford AUD or VSL lathe. I don't mind if it is single phase or three phase. It needs to be in good condition. Other than that, actual spec is not overly important. I'm based in Essex but would be prepared to travel for the right machine.
Ring anytime but if I don't answer, please text or send an email.
Tom Senior M1 Vertical and Horizontal Milling Machine in excellent original condition. Downsizing so unfortunately this most useful miller must be sold. This versatile miller can mill horizontally and vertically with all attachments included. The 31" x 61/2" power-feed table has three rates of feed. The main drive has 12 geared speeds including a slow-speed backgear system gear for very high-torque cuts.
SIXIS S101 High-precision Universal Milling Machine. Since we moved house, I now find I have little space for all of my toys and so I am gradually arranging to sell some of them off. The S101 is a high-quality, Swiss-made machine and comes with many accessories as shown in the photographs. It is powered via a 3-phase inverter which in turn plugs into a UK standard mains socket (230v). It has hardly been used during the last few years and, as such, is in good condition.
Myford Super 7B with screwcutting gearbox. The lathe has just had a complete cosmetic refurbishment, any worn parts changed as necessary, and all readjusted according to the handbook. This is just the basic lathe with gearbox, a 3 jaw chuck and a tailstock chuck. Apart from a few small hacksaw marks on the bed, the lathe is in very good condition. Complete with 3-jaw chuck, a spare 3-jaw chuck, tailstock chuck and single-phase motor. A new spare motor is also included.
Tom Senior M1 Milling Machine complete with the sought-after robust vertical knucklehead with a No. 2 Morse taper spindle and drawbar. All the horizontal equipment is included - overarm, drop bracket and cutter arbor. Table 31" x 6.5" in excellent condition with the later oil-bath power-drive mechanism. 12 speeds from 50 to 1660 r.p.m. with, in addition to direct V-belt drive of the horizontal spindle, internal backgearing to give a range of especially slow and powerful speeds for all kinds of milling.
Denbigh H4 Auto. Vertical Milling machine and kit. A heavily modified and accurate vertical machine complete with a comprehensive set of equipment. Infinitely variable power feed to re-machined 17” x 6” table. Slideways all good and all lock. No. 3 Morse taper in spindle that is also screwed to take a lathe chuck or faceplate, Vertical head with a No. 4 Morse taper and draw bar. Handwheel dials calibrated in 0.001”. 48 speeds. Table travels (approx): longitudinal 13.625” (modified), vertical 13.5”(modified), across 3.2”. 1 h.p. single-phase main motor; 0.25 h.p.
ALEXANDER Master Toolmaker Universal Milling Machine Type IM 20 PA. Serial No P.G R.B 1523 equipped with an Anilam Miniwizard Digital Readout System.
Bergeon Model 50 Watchmaker's 8mm Lathe
SOUTH BEND "Heavy Ten" Toolroom lathe.
4.5-inch centre height. This is the heavily-built big brother of the South Bend 9-inch (that Boxford copied and never equaled). It is the desirable model with under-slung motor and two speed countershaft housed in the stand and the 1” collet capacity mandrel which will allow for 1 3/8” material to pass through. This machine dates from WW2. I have owned and regularly used this machine for over 40 years and am very attached to it but was seduced by a gorgeous Colchester Student . . . lathe . . .
Vintage Selig.Sonnenthal back geared screw cutting lathe dating from 1880-1910. Around 4" x 30" with a large-capacity gap bed the lathe is on its original stand with flywheel drive -though a neat conversion having been made to electric drive. A magnificent and much-loved machine coveted by two generations of my family. Excellent condition with numerous additional changewhels and cutting tools. More information or photos on request.
Myford Super 7BPXF 3.5" x 19" backgeared with screwcutting gearbox and power cross feed. Mounted on a cabinet stand with large chip tray and the maker's levelling blocks. This lathe was owned from new by my uncle (the second of two he had). I bought it from his family after his death some years ago but since I have other lathes to play with the Myford gets very little use nowadays. I have therefore decided to pass it on to someone who will get more pleasure from it. It was my uncle's pride and joy and, as such, it has always been very well maintained and remains in excellent condition.
Sedgwick Planer Thicknesser type 255
For Sale: Colchester Bantam 2000 machine Mk. 2 Serial No. 3/0015/02157A an all-metric machine 280 mm swing, 750 mm between centres, hardened bed, 16 Speeds from 40 to 2000 rpm, 2-speed 3-Phase motor. 3 Morse taper in the tailstock in tailstock. In very good condition, everything works as it should with NO wear evident at all. Very well equipped as follows: Full taper-turning kit including cross-slide lead screw and nut and also the cross-slide leadscrew and nut for normal use in metric (the handle fitted imperial- I couldn't find metric handle at the time.
Myford Mystro Variable-speed Wood Lathe. A top-of-the-range model that is comprehensively equipped and mounted on a good wooden bench with three drawers. Spindle speeds from 175 to 24000 r.p.m. 3/4 hp 1 phase motor with emergency stop /start button and reversing switch, 2 Morse taper headstock spindle, 40 " long bed with 10 " bowl turning over bed, headstock swings 90 degrees to a separate bowl turning attachment with its own pull-out banjo and toolrest that allows work up to 20" in diameter to be turned.
For Sale: Myford Super 7 Lathe Serial No. SK112334D (circa 1972). Mounted on the maker's cabinet stand with a deep chip tray and levelling blocks. In excellent original condition, the maker's paint finish still being in good order. Complete with: super precision, adjustable Burnerd "Grip-Tru" 3-jaw chuck with both sets of jaws and key; the correct half-depth body, internally threaded 6-inch 4-jaw chuck with key; Dickson quick-set toolpost with four holders and the correct spanner; thread-dial indicator, graduated handle to the leadscrew end; rear toolpost and a tailstock chuck.
Aciera F3 This is a later machine with the square-shape vertical head and also the extremely versatile (and essential) swivelling and tilting table. I have owned this machine for the past ten years and, during that time, it has always been kept in my heated workshop. The machine came to me with the original Brown Boveri two-speed 3-phase motor but, since I had no 3-ph supply at that time, I have always used it paired with a programmable Hitachi J100 inverter.
Myford super7 serial number SK164815 (1988-91). Imperial machine with gearbox and power crossfeed,on Myford cabinet stand in green livery.Crompton-Parkinson 550W single phase motor and reversing switch. Very light use.
3 jaw chuck,4 jaw chuck, additional 4 jaw, 2 faceplates, catch plate
4 way toolpost
Thread dial indicator
Precision keyless tailstock chuck
Adjustable cross-slide stops
Fixed and travelling steadies
Vertical swivelling slide - latest two-bolt-per-axis type
Boxford Industrial Lathe 11-20 on the maker’s cabinet stand with full-length splash back and light unit. 3-phase, 400-volt electrics with dual voltage motor giving forward /reverse with six spindle speeds. Well specified and equipped: foot-operated stop safety switch, three guard safety switches and an interlocked chuck guard. Large spindle bore with Cam Lock D1-3 nose fitting. Metric Dials, 3-Morse taper in tailstock. Full threading and traverse, fully enclosed lead screw. Coolant pump & feeder pipe. Set of Change wheels.
For sale is this ex-education Harrison M250 centre lathe.
280 mm - 11-inch swing
750 mm (30-inches between centres)
This is a 3-phase 415V machine with standard 16-amp 3-phase red plug.
Optional rubber feet included. Also includes emergency foot stop and lockable cabinet.
This lathe was originally purchased new in 1990 and has only had very rare use.Most original tools that came with the machine are still included and most of them unused.
The lathe comes complete with the accessories listed below:
For Sale: a wonderful Ames “Triplex” Universal Machine Tool. Built in the United States by the Ames Company - well known for their high-precision machine tools - the “Triplex” can be used as milling machine, co-ordinate drill, horizontal borer and lathe. Very expensive when new - the price of a Chevy Roadster or three South Bend lathes - this example was originally owned by the British Tabulating Company (BTM) - makers of the mechanical “Bombes” used in the Colossus computer at Bletchley Park during WW2.
For Sale: Myford ML7 3.5" x 20" gap-bed, backgeared and screwcutting lathe in fantastic condition.
A very little used, late-model example with all the essential bed grinding marks intact. Mounted on a recent maker's stand with deep chip tray and levelling blocks. 3-jaw chuck, tailstock chuck faceplate, catchplate, spare new chuck backplate, set of screwcutting changewheels, oil gun, etc. 1-phase motor with no-volt safety-release push-button switch.
Raglan 5 Inch. 5” x 24” backgeared, with screwcutting gearbox, power cross feed and mounted on the maker's stand with a full-length splashback.
Myford Super 7 3.5” x 19” gap-bed, backgeared and screwcutting. In good condition with a fairly new Brook-Compton motor and very well equipped: lever-operated tailstock; five toolposts: 2.5” Dixon quick-set with 13 tool holders; original 4-way; a “Gibraltar” type fixed tool post (replaces compound slide, making big cuts possible); the original rocker tool post. A few tools including 95° and 60° insert tools. Rear parting tool with blade. HBM 100 mm 3-jaw chuck, HBM 150 mm independent 4 jaw chuck, both new 5 years ago (and lathe in storage 3 years since then), little used.
26" x 6.25" table. Machine in fine working order and complete with vertical milling head and horizontal arbour with overhead arm. 6 direct and 6 back gears provide a range of speeds from 50 to 1660 RPM.The machine has just a little cosmetic 'wear and tear' to paintwork but the table is in excellent condition with no gouges or chips. All slideways are very smooth and free from slack. The power drive feeds the X traverse with options of slow/medium/fast traverse.The vertical head rotates through 360 degrees.
SOLD Tom Senior M1 Vertical / Horizontal Milling Machine with a power-feed table 26" x 6.25" and in full working order. The example is the most versatile version of the M1 and fitted - on the maker's special bracket - with the superb "S-Type" vertical head with an independent motor and a No. 2 Morse taper spindle with both fine feed by worm-and-wheel gearing and a quick-action drilling feed by rack-and-pinion.
Myford ML7B lathe 3.5” x 20 gap-bed, backgeared with screwcutting gearbox and mounted on the maker’s cabinet stand with chip tray and levelling blocks. A late-model example (with a fully-machined saddle top) this ML7 is in superb, little-used and original condition.
Portass backgeared lathe around 3” x10” with backgear and mounted on a cast-iron treadle stand. This early example of the classic Portass lathe has never been motorised and consequently is in remarkable good, original condition. As this was in the very long-term ownership of my father I’d like it to go to a good home. £150 or offers.
Holbrook lathe Model Types H13, H15, H17, H20 or the "Marquis". Absolutely anything considered, anywhere. Also sought: Holbrook accessories and literature, etc.
Centec 2A vertical and horizontal miller mounted on the larger of the two maker's full cabinet stands. Complete with the swivelling Mk. 3 vertical head with a No. 2 Morse taper quill and both fine and quick-action quill feeds (both along the spindle axis allowing great versatility in setting). Complete with all the horizontal equipment: overarm, drop bracket and two arbors--one full length the other a stub type. The table has both fine-feed screw and quick-action lever feeds (the latter a later type with a quick-release fitting).
Boxford STS 10.20 Industrial geared-head lathe 5" x 20" with hardened bed. Mounted on the maker's cabinet stand with a full-length splash back and locking storage cupboard this lathe is in a metric specification and driven by a high-quality Seimens inverter giving variable-speed drive from a single-phase supply. Power sliding and sutfacing feeds and a fully enclosed safety leadscrew. Spindle has a D1-3 CamLock fitting, a 35 mm bore and is compete with step-down spindle-nose adaptor.
For Sale: Tom Senior E-Type vertical milling machine table 6.5" x 28". This beautifully made and compact milling machine is equipped with a 3-axis DRO and a Newton-Tesla variable-speed drive controller. The "S-Type" head can be swivelled and has both fine and quick-action feeds to the No.2 Morse taper quill. Equipped with a collet chuck and collet set, table clamping set, machine vice, light unit and some other fittings. Buyer to arrange collection but can be loaded onto suitable transport. Contact Malcolm on for further details. Located in Oxfordshire and can be viewed by appointment.
Granville Senior Lathe 4" x 20" gap-bed, backgeared and screwcutting. The lathe is in excellent working order - it was bought by my late father over 25 years ago - and has been used to make a number of model steam engines. However, at some point prior to his ownership the headstock bearing cap was welded--but this has had no effect at all on the accuracy. The lathe is mounted on a good metal stand with cupboards and has a built-on all V-belt drive countershaft, 1-phase motor, guarded changewheels and a headstock belt cover.
Myford Speed 10 lathe 3.25 x 18" backgeared and screwcutting mounted on the maker's stand and in immaculate, little-used condition This is the top-of-the-range, metric-specification ML10 with a roller-bearing headstock, 12 spindle speeds from 48 to 2000 r.p.m. and the late-type built-on countershaft unit However, this example is fitted with a Newton-Tesla variable-speed 1-phase to 3-phase drive unit and motor that gives variable-speed drive between and beyond these nominal limits.
The UWG 2 is both larger and more substantial than its predecessor, the UWG1, with a 4 inch / 100 mm diameter column. The machine consists of: baseplate and column fitted with a compound slide rest with screw-operated cross and vertical feeds plus the option of lever-operated vertical feed by the use of a clutch. The column can be swivelled in its socket against a graduated scale.
Warco GH 1322 Lathe mounted on the maker's cabinet stand with slide-out chip tray and a full-length splash back. 1-phase electrics, metric graduations and an excellent specification including: screwcutting and feeds gearbox, a fully guarded leadscrew power sliding and surfacing feeds, spindle control by a third lever from a handle on the carriage, foot brake and micrometer dials on the tailstock and carriage handwheels. The lathe is in full working order having had only very light use only since new 5 years ago.
Portmac Vertical Milling Machine. Table 15" x 4" with 8 inches of longitudinal travel and 5 inches across. Milling head has 8 inches of coarse vertical travel and 1/1/2 inches of travel in fine feed. With the single phase motor fitted plus push button starter there are 3 spindle speeds available: 375, 750 and 1600 rpm. Provided with one ½ inch collet that fits into the spindle nose. A compact, strong and useful small milling machine.
Boxford 4 1/2" x 24" AUD Mk. 2 lathe metric-specification with screwcutting gearbox, power sliding and surfacing feeds, single lever engagement of backgear, spindle lock and mounted on the maker's underdrive stand with a splash-back and levelling feet. An ex-school machine with chuck guard and emergency foot stop switch. Very well equipped with: six chucks comprising a 4.5-inch self-centring 6-jaw, 5-inch Elliott 3-jaw, Pratt 4-inch 3-jaw, 4-inch TOS independent 4-jaw, 6-inch independent 4-jaw and a Morse taper No. 3 ER40 collet chuck (less collets).
Myford Super 7 lathe 3.5" x 19" gap-bed, backgeared and screwcutting. The ML7R is the Super 7 but less the clutch and fitted with ML7 cross and top slide units.
A Swedish-built 6" x 32" Luna SP800 Wood-turning lathe mounted on the maker's stand. 1-phase electrics. Little used and in perfect working order. This lathe offers a lot of capacity on a compact footprint.
Professional quality Startrite Model 14-S-5 bandsaw. 14-inch throat, 19-inch square table, 10 inches maximum beneath the guides and 5 speeds. 1-phase electrics with push-button starter and isolation box. In perfect, lightly-used order.