Toyo/Record ML360 lathe and Vertical Milling Attachment.  Centre height 75 mm and a capacity between centres of 300 mm (3" x 12"), making it a compact, highly functional, and reliable lathe. No. 2 Morse taper in the tailstock, a roller-bearing headstock, a spindle with a bore of 16mm - superior to a Series 7 Myford and a hardened and ground bed. Fitted with the maker's optional slow-speed kit, 12 reversible spindle speeds span 70 to 2520 r.p.m.  The 1-phase electrical system has a reversing switch. The self-powered milling and drilling attachment, mounted at the rear of the lathe's V and flat-way bed, has five speeds: 210, 420, 630, 960, and 1880 rpm. This unit is supplied with a quick-action drilling feed, and a custom-made, fine down-feed. This unit has a 101 mm milling-column to spindle distance, 200 mm clearance between spindle face and toolpost, 30 mm main spindle travel, and a 12 mm chucking capacity. The ML360 occupies a footprint of 756 mm x 377 mm x 245 mm (29.7" x 14.8" x 9.6") and weighs 30 kg (66 lbs) in standard form, exclusive of accessories. The lathe comes with a very wide range of desirable accessories, including a dividing head after George Thomas complete with tailstock, three dividing plates, milling slide with angle plate, screwcutting attachment, collet chuck and 10 collets to fit both the lathe and miller. circular dividing-indexing attachment, machine vice, a spare spindle-mounting plate, dial gauge on magnetic stand, 3-jaw self-centring, 3-jaw reverse jaws chuck, 4-jaw chuck, faceplate 150mm and clamps, hand-crank to turn the spindle by hand, 4-way and standard toolposts, live centre, blank-end arbour, precision mini vice, chuck mounting adapter, drill chuck, drip tray, sliding die holders 20mm and 25mm, spare drive belt. Also available: a wide range of taps, dies, mostly HSS, selection of calipers and micrometers and tools.The maker’s manual is included. Details of Toyo ML360 lathes here: https://www.lathes.co.uk