Warco WM18 Vertical Miller - an excellent specification and an all-geared head. Fitted with a 3-axis DRO on the table and main head travel - and with an independent DRO on the quill feed.  The spindle taper is an R8 (giving access to inexpensive Bridgeport tooling) and runs in taper roller bearings. The head tilts 90 degrees on each side of the vertical and the quill has 70 mm of travel by both a fine-feed by handwheel and a rack-and-pinion quick-lever feed for drilling. Single-phase motor with reverse with the infinitely-variable spindle speeds from 50 to 1100 rpm in backgear and 150 to 3000 rpm in direct drive. The head travel on the column is 370 mm, the spindle-to-table distance is 465 mm. Table 840 x 210 mm with 590 mm of longitudinal travel and 220 mm in traverse. Light use only and in perfect working order. The current list price with the DRO is over £3000 - offered at £1500. Phone 07471-182510 after 2 pm. The miller's full specification can be found on the Warco website.