For Sale & Wanted

Welcome to our classified adverts pages. If you'd like to advertise a machine or accessories here, or would like to place a Wanted advert, click one of the buttons below. You'll need to be logged in first; If you don't yet have an account with us, you will be asked for an email address.
 

Asking price: £1,250.00

Myford VMC vertical milling machine. Single-phase electrics and fitted with a 2-axis DRO and a number of cutter holders and various items of tooling that surround the machine and shown in the photographs. Table 6" x 24" (150 x 620mm) with a longitudinal travel of 16.625" (422mm), across of 6" (150mm) and Vertically 12.375" (315mm). Full details of the specification can be found below and details of these Myford milling machines here

Location: United Kingdom
Asking price: £1,250.00

Harrison vertical and horizontal "universal" milling machine. This is a rare, top-of-the-range example equipped with all the options: a swivelling "universal" table, power-feed to the table, a clutch to the spindle drive, "step-up" vertical head, a vertical and horizontal rotary table fitted with a 3-jaw chuck, coolant, Low-Vo light unit and swivel-base and standard machine vices. This is a workshop clearance and there may be a quantity of tooling included as well. 3-phase electrics.

Location: United Kingdom
Asking price: £1,250.00

Hayes Diemaster precision vertical milling machine Type 21a Serial Number 161. Table 21" x 6.5" with a reground top.  No. 2 Morse spindle taper with speeds from 50-2400 r.p.m. run from the original three-phase motor and includes a high-quality Transwave one-phase to 3-phase 3.7KW converter complete with a balancing motor for better performance. This is a very clean example of a robust, well-built and easy-to-use machine. All the sideways are good with smooth movements and pleasant to use. All spindle bearings and the drive gearbox are in good order.

Location: Exmouth, United Kingdom
Asking price: £3,250.00

A new watch/instrument maker's milling machine by John Stevens. Complete with drilling quill, horological 8mm spindle and ER collet spindle, machine vice and all the necessary tee bolts, allen keys, chuck key, spare drive belt, adjustable 24volt power supply and various other parts. There is a movable and flexible light system also included. The machine comes with a 5C collet indexable headstock that can be driven via a rear pulley to enable turning when mounted on the rear table. Standard 5c collets (not included) of up to 1” can be used for turning or gear cutting, etc.

Location: London, United Kingdom
Asking price: £950.00

Quick-Step Milling Adapter (by John Payne Engineering). The Quick-Step is a powered spindle that can be mounted in the toolpost of most lathes with a centre height of at least 3.25".* High torque, reversible DC motor (runs on 240V or 110V mains), 9-speed drive from 100 to 4000 r.p.m., ER20 spindle/collet chuck system and a vertical slide accurate to 0.001" over 1.5" of travel. Very little used. £950. Also available: an 18" x 18" surface plate for £75

Location: Portsmouth, United Kingdom
Asking price: £1,250.00

Centec 2B Milling Machine. A top-of-the-range Centec, this example is fitted with a third-party double swivel vertical head. A DRO system if fitted to the X and Y travels and the longitudinal travels retains both its screw and quick-action lever feeds. The vertical head has a full collet set and the horizontal overarm and drop are included, but there is no cutter holding arbor. Full details of Centec milling machines here

Location: Warrington, United Kingdom
Asking price: £650.00

Astra L2/L4 Milling Machine for sale with the maker's (very expensive) powered vertical head with 60mm of travel to the No. 2 Morse spindle, 1-phase motor with reversing switch. The miller was built in the 1970s but is still a current model - the motor for the horizontal drive is 1-phase.
Table 430 mm x 130 mm. Traverse 300 mm x 115 mm. Arbor to table 220 mm max. Arbor diameter 25.4 mm. Weight 140 - 155 kg. Reversing switch. MT2 spindle

Location: Southampton, United Kingdom
Asking price: £150.00

Three Workshop Clearance Lathes and a milling machine. Long-term stored and in need of some TLC.
1) SOLD: Boxford precision plain-turning lathe 3.3" x 9.5" with 3 and 4-jaw chucks, 4-way toolpost, motor and countershaft. £150 or any offer. Full details of these lathe here

Location: Sheffield (Mosborough), United Kingdom
Asking price: £950.00

Hayes Diemaster Precision Vertical Milling Machine - a compact, high-class machine tool in full working order. Retrofitted with an infinitely variable speed motor drive. Table 21 x 6.5 inches. The swivelling vertical head has a No.2 Morse taper and fine down-feed through a worm-and-wheel gearing. Complete with a machine vice, an ER25 collet set and a clamping kit. I now urgently need the room, so the price has been reduced to a bargain £950.

Location: Southsea, United Kingdom