Harrison vertical and horizontal "universal" milling machine. This is a rare, top-of-the-range example equipped with all the options: a swivelling "universal" table, power-feed to the table, a clutch to the spindle drive, "step-up" vertical head, a vertical and horizontal rotary table.

Rapidor Mechanical Hacksaw - this is a heavier-duty, 6-inch capacity version. Runs from a high-quality 1-phase to 3-phase converter by Transwave. Mounted on a wheeled trolly for ease of moving about. REDUCED to £375 -which includes the converter.

Myford ML7 lathe serial no. K 64382.

Rishton Vertical Milling Machine. UK-made, all-geared head, single-phase electrics.

Myford Super 7B with screwcutting gearbox, spindle clutch, quick-change toolpost and mounted on the maker's cabinet stand with levelling blocks and a deep chip tray. Previously owned by three model engineers in Banbury - who also had bigger lathes - so has had only light use.

REDUCED to just £375 as I desperately need the room.

Colchester Chipmaster Lathe. A very low-hours 5.5" x 23" lathe with speeds from 35 to 3000 r.p.m. Just fitted with a top-of-the-range Newton-Tesla inverter at a cost of £520. The lathe is in perfect working order, having only been used in a research and development department.

An exceptionally fine, one-owner-from-new Myford ML7 lathe, 3.5" x 20 backgeared and screwcutting and in its original maker's finish. Very carefully used and fitted with an excellent range of accessories including a Cowells quick-feed capstan tailstock handle (and the standard sc

Lodge & Shipley Lathe circa 1905. Fitted with a full screwcutting and feeds gearbox of the Norton "Quick-change" type, long-T-slotted saddle wings to act as a boring table.

Hommel UWG1 multi-function machine tool. It appears to be largely complete and with a number of accessories as shown in the photographs including a large number of screwcutting changewheels and collets. The only fault appears to be a broken bracket on the motor mount.

Elliott Mini Jig Borer. A compact, high-accuracy machine in super condition with very little light use. Single-phase phase motor, all feeds working, a lovely quiet, smooth machine tool. Supplied with collets as in photo  Can be transported in a van or trailer and we can help load.

CAPCO manually-operated surface grinder complete with an Eclipse magnetic chuck. A robust, compact and reliable little surface grinder. It's supplied with new single-phase motor which requires mounting and switch gear. Easily transported in an estate car, van or trailer.

Britannia Colchester Lathe c.1900. Mounted on the maker's treadle stand, backgeared and screwcutting with a gap bed and a complete set of screwcutting changewheels (there is also a tailstock but not shown in the first phtographs). Bought new and has remained in the same family ever since since.

This is a late-model Perris lathe - fitted with a proper Parvalux motor and very similar to the first Cowells lathe.

For Sale: A beautiful Antique Weisser Model EE Lathe in full working order.

Harrison M250 lathe 5.7" x 20" with a hardened bed and driven by a 1-phase to 3-phase converter. The lathe has been standing unused for some time and is offered as a restoration project or for spare parts The lathe is on the Isle of Wight.

Harrison L2 lathe 4.5” x 24” gap-bed, backgeared and screwcutting. An early model with flat-belt drive, mounted on its own stand with a built-on countershaft, single-phase motor and in full working order with some tooling and accessories as shown.

For Sale: Pultra 15/90 high-precision lathe. This is the rare, larger Pultra with a 3.5" centre height and taking 20 mm through the headstock spindle. Mounted on the maker's underdrive, 9-speed Mardrive stand that gives 135 to 3265 rpm.