Stat Systems (Herbert). Chart showing setting instructions for Herbert and Ward capstan lathes in sizes 2, 3 and 4 sizes.

Stat Systems (Herbert). Chart showing setting instructions for Herbert and Ward capstan lathes in sizes 2, 3 and 4 sizes.

WARD 10C and 10CR Prelector Combination Turret Lathe: Operator's Instruction
and Maintenance Manual with Hydraulic and Electrical Schematics.

WARD Capstan and Turret Lathes.

WARD Bar Chucks - Manually and Automatic (Air-operated Types). Manual for Operation, Maintenance, Fitting, Removing, Dismantling and Assembly, Lubrication, Sectional Drawings and Parts as Exploded Component Drawings, etc. This is the only publication Ward issued for their Bar Chucks.
 

Ward "Crusader" M.D.I. Lathe (based on the Ward 3DS). Operating Manual.

Ward 10 Turret Lathe: Spares Manual as Detailed Sectional Drawings.

Ward 10/13 Turret Lathe (also applicable to the very similar 10/18 Model): Spares Manual as Detailed Sectional Drawings.

Ward 10D Pre-selector Combination Turret Lathe: Spares as Detailed Sectional Drawings.

Ward 10D and 10C Pre-selector Combination Turret Lathe: Operator's Instruction and Maintenance Manual. This publication is marked for the 10D but also covers the very similar 10C.

Ward No. 2 and No. 3 "Auto-Ward" Plug Programmed Double Slide Capstan Lathes. Detailed Electrical and Hydraulic Circuits Manual.

Ward No. 2 and No. 3 "Auto-Ward" Plug Programmed Capstan Lathes. Installation, Operating and Maintenance Manual including fault Diagnosis. Late Edition, fully revised.

Ward No. 2A Capstan Lathe. Operating Manual - two editions are included.. Includes a copy of the maker's comprehensive Sales and Specification Catalogue. Also a suitable publication for the very similar Model 2C

Ward No. 2A Capstan Lathe. Spare Parts Manual as detailed Sectional Drawings. Also of use with the very similar Model 2C. We may well be able to supply an original copy instead of a reproduction. If we have one, it will be sent.

Ward No. 2CA Capstan lathe. Spare Parts Manual as Detailed Sectional Drawings.

Ward No. 2CA, 2DS, 3CA and 3DS Capstan lathe. Operator's Instruction and Maintenance Manual. Two editions are included, the later large and earlier small format versions, together with a copy of the maker's Technical Sales and Specification Catalogue.

Ward 2DB and 3DB Capstan Lathes - late type with a flat top to the headstock: Spare Parts Manual as Detailed Sectional Drawings.

Ward 2DB and 3DB and 2DB(NF) and 3DB(NF) Capstan Lathes. Operator's Instruction and Maintenance manual with motor-control, chuck-control, bar-feed and air-feed control wiring diagrams.

Ward 2DS Spare Parts Manual as Detailed Sectional Drawings. Large Format.

Ward 2DS and 3DS Plug Programme Lathes. Capstan Lathes: Instruction Course Manual with Practical Working Examples.

WARD 2DS and 3DS Capstan Lathes: Data Pack with Operating Manual (Small Format) that includes extensive data and illustrations from Technical Advertising Catalogues.

Ward 2DS and 3DS Plug Program Lathes: Operator's Instruction and Maintenance Manual.

Ward No. 3 Automatic Lathe: "Setting Manual". this should really be called an "Instruction Book" and shows the basic operating procedures for using the lathe, the air-operated bar feed and automatic chucks, etc.

Ward No. 3 Plug Programmed Lathe: Spares as Detailed Sectional Drawings.