We are open!

We are still open and working as normal, though the postal system is slower than usual. If your order is urgent, please contact us to arrange special delivery.

Myford Super 7 and ML7R Drive Belts

T-Link

Category: 

Manufacturers: 

Myford

Models: 

Super 7 Super 7B ML7R

Motor to countershaft and countershaft to headstock belts of the NuT-Link Type. Link belts help to reduce the vibration normally passed from a single-phase motor to the lathe - and was a fitting often used by Myford Service engineers to "quieten" a noisy machine. On the Super 7 and ML7R, the T-link belt is highly effective on the drive from motor to countershaft.
On the drive from countershaft to the main spindle, it is often the case that there is insufficient room between the inner face of the headstock and the largest pulley on the spindle -this meaning that the very lowest speed is not available. In order to use a link belt that gives the lowest speed, a length of PowerTwist belt can be used - and can be found here.
Select your required belt - motor to countershaft or countershaft to headstock - below:

Price£32.00
20% VAT£6.40
Price£38.40
Delivery prices shown are for 1 item.
Delivery (UK): 
£2.50
Delivery (EU): 
£4.50
Delivery (Worldwide): 
£8.00

PowerTwist

Category: 

Manufacturers: 

Myford

Models: 

Super 7 Super 7B ML7R

The only PowerTwist belt needed on the Super 7 and ML7R is from the countershaft to the headstock. The use of this belt guarantees that the lowest speed will be available as, when fitted with the metal-pin NuT-link there may not be enough room between the inner face of the headstock and the largest pulley on the main spindle.
From the motor to the countershaft, use a T-Link belt as available here.

Price£27.00
20% VAT£5.40
Price£32.40
Delivery prices shown are for up to 2 items.
Delivery (UK): 
£2.50
Delivery (EU): 
£4.50
Delivery (Worldwide): 
£8.00