The correct high-quality drive belts for Myford Mystro wood-turning lathes.
There are two belts:
10 mm wide for the standard machine and about 20 mm wide for the variable-speed model. Click the down arrow in the box below to select the one you need.
Emco Compact 5 Lathe Drive Belts. The correct high-quality German-made units. Sold as a pair, large and small.
The drive belt for the Emco Compact 5 and Compact 8 vertical can be found here: https://store.lathes.co.uk/product/19811
Emco Compact 5 and Emco Compact 8 Milling Head Drive Belt. The is a special, very short belt to fit the vertical milling head fitted to the Emco Compact 5 and Emco Compact 8 lathes and also the stand-alone Emco 5 vertical milling machine.
Drive belts for the Emco Compact 5 lathe can be found here: https://store.lathes.co.uk/parts/drive-belts/emco-compact-5-lathe-drive-belts
Record and Coronet No. 0, 1, 2, 3, CL1, CL2 and CL3 wood lathes. The correct, high-quality drive belt. Made in the UK or EU - not China.
If you have a Hole miller you might want to check dimensions.
The belt is:
1.5" wide
0.47" thick
Inside length = 33"
outside length = 35.75"
Round drive belt for the small but popular Naerok, NuTools, Warco, Seeley and Multico branded bandsaws. This is the very best quality, Swiss-made Polycord.
We have determined that the Naerok and NuTools versions had a belt made from 7 mm diameter material in the following lengths: 650, 660, 670 and 680 mm. However, it's important to check the length you need carefully and tick the right box.
Please take care to measure the belt and select the appropriate length in the "down-arrow" box below.
Mini V-belts, 8 mm across the top surface - as used on a wide variety of small machine tools. These are high-quality, genuine European-made belts. To view the available sizes and in other applications. The post price covers the shipping of three belts. Click the down arrow in the box showing the 375 to see the range of sizes available. The "teeth" on the inside of a belt are not drive teeth, but cut-outs that allow the belt greater flexibility when running around small-diameter pulleys.
The correct, high-quality, UK or EU-manufactured flat-backed belt with 5 multi-V grooves on the inside to fit late-model Coronet and Record "Major" wood turning lathes and the multi-function machines based on this machine.
The earlier Major used an ordinary V-drive belt and this can be ordered here: https://store.lathes.co.uk/product/20057
The wide, toothed belt for the Emco Compact 8 and the similar copies made in Taiwan.
The narrow V-belt can be found here: https://store.lathes.co.uk/parts/emco-compact-8-narrow-v-belt
Boxford VSL Boxford Lathe Vari-speed belt. Unfortunately, the exact belt is no longer available but one close can be supplied. In order to obtain the whole speed range, this will need 1/4" (6mm) packing piece between cross-shaft and hangers to increase the distance to the motor. However, this is not essential as only a little of the slowest speed will be lost if the belt is fitted "as-is". Sent insured by Royal Mail Special Delivery.
A pair of Hobbymat - Prazimat Lathe belts. Top quality, made in Germany. For smooth, vibration-free running at high speedsof it is recommended that both belts be changed at the same time. One each of the two sizes: short and long.
A belt for the Hobbymat - Prazimat Wood Lathe Models MD120 and MD150 click here to order
Final drive belt for Boxford Underdrive lathes. For this application, 1.4 metres of A-section Nu-T-link is needed.
Minilor TR1 lathe and milling head toothed belts. A complete set of three comprising: toothed 420, 340 and 280. Although these belts are all the correct length and tooth pitch, they can vary slightly in width.
PLEASE READ ALL OF THE FOLLOWING CAREFULLY: The only PowerTwist belt needed on the Super 7 and ML7R is an "A" section from the countershaft to the headstock. The use of this belt guarantees that the lowest speed will be available as, when fitted with the metal-pin NuT-link there may not be enough room between the inner face of the headstock and the largest pulley on the main spindle.
Kerry "Super 8" & "Drillmaster" drive belt. UK or EU-made high-quality, machine-tool grade belt with an invisible joint that, unlike the cheap imports, does not bump as it goes around the pulleys and so ensures the smoothest possible drive. This is the correct fitting for both the Mk1 and Mk.2 Kerry Super 8 models and all versions of the "Drillmaster". Details of Kerry drills here
Alligator Belt Lacing - the Genuine American-made product not the inferior copy made in China. A length of clip is hammered in at each end of the belt and joined with two sections of the special oval pin supplied - these being designed to work back-to-back. Alternatively, a length of nylon or red-fibre rod can be used. A detailed instruction sheet is supplied with each clip. "Alligator clips" are made in various sizes but five cover most belts in common use.