Myford 254 Plus - a top-of-the-range 254 in exceptional condition.

A late model Perris SL90 late in excellent condition with High quality VFD drive and a large range of extras including a taper turning attachment, QCTP with 12 holders,

Studer FS21 high-precision profile/ tool and cutter grinder.

Kellenberger Cylinder Grinder being sold with 20+ Grinding Wheels.

This machine originally came from the BSA Motorcycle works.

Boxford Fixed and Travelling Steadies and a spindle-nose thread tap

Myford M-Type lathe 3.5" x 16" gap-bed, backgeared and screwcutting and with automatic disengage to the carriage drive.

Atlas Bench Drilling Machine

Chester "Conquest" Vertical Milling Machine

Myford Super 7 lathe 3.5" z 19" gap-bed, backgeared and screwcutting

EW lathe 2.4" x 8" backgeared for slow speeds and screwcutting.

ETA Lathe. Backgeared and screwcutting and fitted with a new single-phase motor and push-button starter. ETA lathes were made by the ETA Tool Company of Leicester, England. Complete with a good, strong countershaft with new belts just fitted. Details of ETA lathes can be found here: http://www.lathe

Arundel J4 senior wood lathe. This was my father's lathe - I know little about it - but it is a very strongly built, heavy lathe with a good reputation. It has a chuck and is fitted with a bowl-turning attachment. Single-phase motor with a stop-start button switch.

Raglan Little John Mk.2 variable-speed lathe. 5” inch centre height and 24” between centres. Fitted with a screwcutting gearbox, power cross feed and a single-phase motor. Complete with a 3-jaw chuck, quick-change toolpost with one holder, faceplate, tailstock chuck, thread-dial indicator and a DRO.

Cowells 90ME Precision Miniature Lathe, backgeared for slow speeds and screwcutting.

A Pittler C3 Classic Lathe with an extra long bed and an overhead drive system with its own 1-phase motor.This is an early model, Serial No. 890, very well equipped and in full working order.

Robland-Startrite Model SD310 is an Industrial-class wood planing machine.

Feed speed 7m/min.

Cutter block speed 5300 r.p.m.

Cutter block diameter 70 mm.

Max thickness capacity 305 x 200 mm.

Max planing width 320 mm.

This Ward 2A Capstan Lathe is an old but useful machine in very good working order.

A pair of unused André Bechler Swiss "Simplex" Gear and Pinion Engines. Priced for sale as a pair - but would split. The two machines were originally obtained still with their manufacturer's packing grease.

Myford ML7 Lathe 3.5" x 20" gap-bed, backgeared and screwcutting. Included are many useful accessories and a range of associated tooling - all collected over many years and shown in the photographs. £1775 - offers invited.

Victoria Elliott Horizontal Milling Machine. 3-phase with some tooling. £350 or any offers considered.

Startrite 20RF Vertical Bandsaw. A powerful, 3-wheel model with a 1.5 h.p. 3-phase motor, a 20-inch throat and weighing 363 kg. Currently in use.

Antique Norton Hand-operated Surface Grinder, 3-phase. Complete and original. £350

Hand-operated rollers £250

Heavy, treadle-operated shears. £350

Fobco 7/8 "backgeared" pillar drill with 10 speeds from 51 to 2650 r.p.m. A heavy-duty drill with a reputation for reliability. 3-phase electrics. Full technical specifications in the pictures. £600

Norton No.66 Fly Press. £500

Manchester Rapidor Hacksaw. A low-hours, late-model, ex-university machine with the speed-reduction gearbox built into the motor. Fitted with coolant amd in full working order. 3-phase motor. £450 or offers.