ATLAS Lathes full-range Catalogue No. 15 (circa 1936) with metal & wood-turning lathes including the later 9-inch "all-belt" drive machines, the Model 918 "Utility" Model, the revised 10-inch Model, "Unit Plan" versions, accessories, wood-turning lathes, drills, presses & motors. 44 pages.

ATLAS Lathes full-range Catalogue No. 26 (dated 1936/1937). The first of the comprehensive Atlas catalogs illustrating the last 9-inch "all-belt" drive lathes together with the Utility versions; 10-inch screwcutting Models and the cheaper Unit Plan versions; wood-turning lathes; drills, presses, vices, motors & accessories.

ATLAS Lathes full-range Catalogue No. 28 (November 1937) with lathes, millers, shapers, drills, etc.: 52 pages.

ATLAS Lathes full-range Catalogue No. 31 (circa 1938) with lathes, millers, shapers, drills, presses, vices, motors & accessories. 70 pages. The print is 'soft' and the many small photographs require lots of work by hand to degauss and improve contrast. The result is a perfect reproduction of a high-quality 120g paper.

ATLAS Lathes full-range Catalogue No. 39 (January 1939) with millers, shapers, drills: 70 pages. The print is 'soft' and the many small photographs require lots of work by hand to degauss and improve contrast. The result is a perfect reproduction of a high-quality 120g paper.

ATLAS Lathes full-range Catalogue No. 40 (1940) with millers, shapers, drills: Atlas Catalogs are not the easiest to scan and prepare for printing. The print is 'soft' and the many small photographs require lots of work by hand to degauss and improve contrast. The result is a perfect reproduction of a high-quality 120g paper.  70 pages 

ATLAS Lathes full-range Catalogue No. 41 (1941) with millers, shapers, drills: 64 pages.

ATLAS Lathes full-range Catalogue No. 45 (1945) with millers, shapers, drills, etc: Atlas Catalogs are not the easiest to scan and prepare for printing. The print is 'soft' and the many small photographs require lots of work by hand to degauss and improve contrast. The result is a perfect reproduction of a high-quality 120g paper.  64 pages.

ATLAS Lathes full-range Catalogue No. 50 (1950) with millers, shapers, drills: 35 pages £

ATLAS Lathes full-range Catalogue No. M52 (1952 to 1958) with 1954 price list and millers, shapers, drills: The print is 'soft' and the many small photographs require lots of work by hand to degauss and improve contrast. The result is a perfect reproduction of a high-quality 120g paper.

PARKANSON Lathe - this is a copy of the South Bend 9-inch lathe and the very best Manual is the one produced in England for the South Bend clone made by Boxford. Unlike the South Bend book "How to Run a Lathe" this 170-page edition concentrates in detail on the 9-inch lathe.

INVICTA, Elliott (& Alba) Shapers. Sales, Accessories & Technical Specifications Catalogues. A complete data pack that Illustrates and describes the constructional features of the range from the No.2 to the No. 30.

A complete Rivett Data Pack consisting of
R466D
RIVETT 608 (USA)
Workshop Manual and Instruction Manual. Army Issue Publication - Covers, in great detail, every aspect of the lathe and its use. Also applies, in general terms, to the earlier and similar 8-inch Precision. 140 pages. GBP45

LANCASHIRE Dynamo Nevelin Ltd. Variable-speed Drive. Instruction Manual with a large Electrical and General-arrangement Schematic. £65

HJORTH (USA) Precision Bench Lathe Catalogue No. 12 with unusual and interesting lathe accessories. A complete, high-quality reproduction. 60 pages.

Unfortunately there never was any sort of Instruction Manual for Dalton lathes but I have collected together a set of interesting sales catalogues that cover the Combination Machine and the 7-inch, 8-inch and 9-inch lathes.

ENGEL Roll Forming Machines - All-models instruction Manual. Includes a set of the maker's Sales, Specification & Accessories Catalogues.

Logan Lathes. Early Instruction and Maintenance Manual book for the Logan and Montgomery-badged lathes with slender bed feet.

Mechanical Fitting For Engineering Craftsmen by the Engineering Industry Training Board.

Oliver Machinery Grand Rapids USA. Full product line catalogue: saws, band & jig saws, surfacers, jointers, lathes, borers, tenoner & mortiser, shapers, grinders, vices, spindle shapers. 1960s & 1970s models.

Complete Rollo Catalogue set:
ROLLO Supreme 800 lathe. Combined basic maker's Instruction manual & Catalogue Set. 16 pages.
Rollo Combi Machine - lathe, miller, drill Catalogue and a small Rollo Company Catalogue. 8 pages.
Rollo R.A.S.C & R.E.M.E. Lathe. Sales & Technical Specification Catalogue. 4 pages

"Machining For Toolmaking and Experimental Work" by the Engineering Industry Training Board. A detailed, easy-to-follow and well-illustrated course of instruction that covers: Turning, Milling, Shaping/Slotting and Surface Grinding with step-by-step guides. An ideal course for beginners to the subject.

Turning on the Lathe by the Engineering Industry Training Board - an Instruction Manual for Engineering Craftsmen. A detailed, easy-to-follow and well-illustrated course of instruction with step-by-step guides.

LeBlond (USA): Complete Range Catalogue 1921 Full of useful information and detailed component pictures. Small format enlarged to A4 (just short of USA "letter")