Round drive belt for the small but popular Naerok, NuTools, Warco, Seeley and Multico branded bandsaws. This is the very best quality, Swiss-made Polycord.
We have determined that the Naerok and NuTools versions had a belt made from 7 mm diameter material in the following lengths: 650, 660, 670 and 680 mm. However, it's important to check the length you need carefully and tick the right box.

Please take care to measure the belt and select the appropriate length below.

Emco Compact 8 lathe. The correct USA-made, high-quality 5mm wide, narrow V-belt drive belt.
The other belt, a toothed type, can be ordered here  https://store.lathes.co.uk/parts/emco-compact-8-warco-ct-918-intercity-pinnacle-naerok-lathes-toothed-drive-belt

Toothed drive belt for the Emco Compact 8 lathe - also fits the very similar lathes branded as the  CT-918 by Warco, Excel, Intercity, Pinnacle and Naerok, etc.
- The other belt, a narrow 5mm wide drive belt for the Emco Compact 8 lathe can be ordered here

A pair of Hobbymat - Prazimat Lathe belts. Top quality, made in Germany. For smooth, vibration-free running at high speeds it is recommended that both belts be changed at the same time. Two sizes: Short: 8 x 375 and Long: 8 x 425
A belt for the Hobbymat - Prazimat Wood Lathe Models MD120 and MD150 click here to order
 

Toothed drive belt for Emco V10 and V10 Mentor lathe. The belt should be 19 to 20 mm (3/4") wide and possibly marked 200XL x 75, iIf so, this belt is correct. However, some late versions of the V10 appear to have been fitted with the 25 mm wide (1") belt from the V10P. If your belt is missing, just measure the width of the toothed pulley. If the pulley is 25 mm (1") wide you'll need the V10P belt that can be ordered here: https://store.lathes.co.uk/parts/drive-belt-emco-v10p-lathe

Emcomat 7 and 7L lathes: Toothed Drive Belt. Only the 3/4" (19 mm) wide belt is now available. The 1-inch (25mm) belt is no longer made. If you lathe has the wider belt,. the narrower one will still work but, if the lathe is hard used, will not last as long.

Fobco "Star" and "Universal" Drill Drive Belt: this is a European-made, high-quality, machine-tool grade belt with an invisible joint that, unlike cheap imports, does not bump as it goes around the pulleys and ensures the smoothest possible drive. The belt fits all models of Fobco "Star" and "Universal" drills.  Details and specifications of all Fobco drills can be found here

Fobco 7/8 and 10/8 Drills Drive Belt: This is a European-made, high-quality, machine-tool grade belt with an invisible joint that, unlike cheap imports, does not bump as it goes around the pulleys and ensures the smoothest possible drive. Details of Fobco drills can be found here    For the Fobco Star drill belt, click here.

Sold by various importers including Axminster, Chester, Warco, etc. The "920", "CT-918" lathe and other Model Numbers - a Chinese-made lathe that was, in effect, a developed copy of the Emco Compact 8.. This is a narrow, 5 mm wide V-belt - and is normally tensioned by a lever on the headstock. This belt is a top-quality, USA-made product.

Main drive belt for the Emco V10P.
Belts for the Emco V7, V8 , 8.4, 8.6 and V8 lathes can be ordered HERE and belts for the Emco V10 lathe HERE

Mushroom connectors for hollow round plastic drive belts. Click the down arrow in the size box to choose the correct one for your belt: The size of the connector refers to the diameter of the belt material - not the size of the hole in the belt.  Connectors for belts of the following diameters are available: 5mm, 6mm, 8mm, 10mm and 12mm are available.

As the lengths of the round drive belts on this appear to have varied we supply 1.2 metres of 5 mm diameter Polycord for you to make up your own. The belts are joined by melting the ends together - simple step-my-step instructions are included.

Motor to countershaft and countershaft to headstock belts of the NuT-Link Type in a Z-Section.  Link belts help to reduce the vibration normally passed from a single-phase motor to the lathe - and was a fitting often used by Myford Service engineers to "quieten" a noisy machine. On the Super 7 and ML7R, the T-link belt is highly effective on the drive from motor to countershaft.

PLEASE READ ALL OF THE FOLLOWING CAREFULLY: The only PowerTwist belt needed on the Super 7 and ML7R is an "A" section from the countershaft to the headstock. The use of this belt guarantees that the lowest speed will be available as, when fitted with the metal-pin NuT-link there may not be enough room between the inner face of the headstock and the largest pulley on the main spindle.

The correct, high-quality, UK or EU-manufactured flat-backed belt with 5 multi-V grooves on the inside to fit late-model Coronet and Record "Major" wood turning lathes and the multi-function machines based on this machine.
The earlier Major used an ordinary V-drive belt and this can be ordered here: https://store.lathes.co.uk/parts/coronet-major-lathe-v-belt

 Barelli Competition Roller clock drive belts. 5mm dia x 865 mm

We can also make belts for all cycling machines. Phone: 01298-871633 from 09:00 to 21:00 for advice.

Set of 3 Toyo ML1 (ML-1) Lathe Belts made from round 5 mm diameter Swiss "Polycord. There is confusion as to what length these belts need to be - and several differences have been found. Hence. the solution is to make up your own using 1 metre of Poloycord. This is supplied complete with instructions about measuring and joining.
 

The wide, toothed belt for the Emco Compact 8 and the similar copies made in Taiwan.
The narrow V-belt can be found here: https://store.lathes.co.uk/parts/emco-compact-8-narrow-v-belt

The special high-quality, UK or EU-made belt for the headstock drive on the Tyme Avon Wood Lathe.

There is also a manual available for this lathe

A belt for the Tyme CUB lathe can also be provided

Tyme Cub wood-turning lathe A UK or EU-made high-quality headstock spindle drive belt.

A manual can also be provided for this lathe

A belt can also be provided for the Tyme AVON lathe

The correct high-quality drive belts for Myford Mystro wood-turning lathes.
There are two belts:
10 mm wide for the standard machine and 20 mm wide for the variable-speed model. Click the down arrow in the box below to select the one you need.

Emcomat 7, 7L, 8.4, 8.6 and V8 lathes: drive belt, toothed type  1-inch (25mm) wide. Unfortunately, this belt is now out of production - but the 3/4" (20mm) belt for the earlier version of this lathe fits and works just as well - but clearly, if the lathe is hard used, will not last as long.

Mini V-belts, 8 mm across the top surface - as used on a wide variety of small machine-tool and in other applications. High-quality, genuine European-made belts. These belts can be difficult to source, but we aim to keep stock of all the sizes listed. The post price covers the shipping of three belts. Click the down arrow in the box showing the 375 mm belt to see the range of sizes available. The "teeth" on the inside of a belt are not teeth, but cut-outs that allow the belt greater flexibility when running around small-diameter pulleys.

Clips for round leather belts.

Emco Compact 5 Lathe Drive Belts. The correct high-quality German-made units. Sold as a pair, large and small.
The drive belt for the Emco Compact 5 vertical milling head can be found here: https://store.lathes.co.uk/parts/emco-compact-5-and-compact-8-lathes-milling-head-drive-belt

Drive belt for late-models Coronet Elf, Minor, Minorette wood lathes. High-quality UK or EU-manufactured

Drive belts for the vertical milling head fitted to Toyo (Manix) Record ML210 lathes (or the stand-alone milling machine version). The belts are top-quality, Swiss-made Polycord in the special machine-tool drive variety. Two belts are supplied in the set with lengths of 265mm and 285mm.

Belts for the Toyo (Manix) Record ML210 lathe can be found here: https://store.lathes.co.uk/parts/toyo-manix-ml210-lathe-belts

After some difficulty obtaining reliable and correctly-made supplies of Emco Unimat belts we have decided to offer instead the special Swiss-made drive belt we sell for light industrial applications. It's widely used on all sorts of drives and we now sell lots for watch and clockmaker's lathes - and of course various kinds of Unimat. It's long-lasting and very reliable.

Unfortunately, these belts are now very difficult to obtain with minimum orders and expensive with post from the EU.  As an alternative, I suggest using a 1.1 metre length of 7 mm Polycord round belting. It's a special Swiss-made machine-tool drive type and very effective and can be joined into the lengths needed for a Toyo ML360. It can be ordered here with full joining instructions provided..
http://store.lathes.co.uk/belts/solid-round-plastic-belting

The correct drive belt for the Hobbymat Wood lathe MD120 and MD150 - also branded as the Prazimat Al-Co Kober, HMD 8502 and Farmer.8/425

Kerry "Super 8" & "Drillmaster" drive belt. UK or EU-made high-quality, machine-tool grade belt with an invisible joint that, unlike the cheap imports, does not bump as it goes around the pulleys and so ensures the smoothest possible drive. This is the correct fitting for both the Mk1 and Mk.2 Kerry Super 8 models and all versions of the "Drillmaster". Details of Kerry drills here