A new development of an old idea - a link belt without metal fasteners. This is highly effective on all lighter machine tools and especially useful on precision lathes and millers where a "softer" drive, free from vibration, is appropriate.

Quick-change Toolholder for small lathes up to 100mm (4") centre height - Myford ML10, ML7, Compact 8, etc - "Dickson" type with central block and complete with 4-stations to hold standard, parting-off and boring tools: All parts hardened and ground.

Quill-return spring for Fobco "Star" bench and floor models - a genuine maker's original part. The spring, coiled-up, is 1.5 inches (37 mm) in diameter and 0.5 inches (13 mm deep). Details of a spring for the larger Fobco 7/8 and 10/8 drills can be found here.

Quill-return spring for Fobco 7-Eight and 10-Eight models - the maker's original specification, UK-made part. Not to be confused with the thiner, fewer-coil and inferior type sometimes advertised on ebay.   The spring is 0.75 inches deep (19 mm) by 2.45 inches (62 mm) in diameter over the coils.
Details of the spring for the smaller Fobco "Star" drill are here.

Round drive belt for the small but popular Naerok, NuTools, Warco, Seeley and Multico branded bandsaws. This is the very best quality, Swiss-made Polycord.
We have determined that the Naerok and NuTools versions had a belt made from 7 mm diameter material in the following lengths: 650, 660, 670 and 680 mm. However, it's important to check the length you need carefully and tick the right box.

Please take care to measure the belt and select the appropriate length below.

OUT of STOCK  Diameter: 160 mm 6.3" 1.75" x 6 tpi square thread

Emco Compact 8 lathe. The correct USA-made, high-quality 5mm wide, narrow V-belt drive belt.
The other belt, a toothed type, can be ordered here  https://store.lathes.co.uk/parts/emco-compact-8-warco-ct-918-intercity-pinnacle-naerok-lathes-toothed-drive-belt

Toothed drive belt for the Emco Compact 8 lathe - also fits the very similar lathes branded as the  CT-918 by Warco, Excel, Intercity, Pinnacle and Naerok, etc.
- The other belt, a narrow 5mm wide drive belt for the Emco Compact 8 lathe can be ordered here

Screw pitch gauge - now double-sided - to measure both Whitworth (55-degree angle) and Metric (60-degree angle) threads. Includes templates for all common sizes. This is the best quality one that I've been able to find - not as good as a traditional Jones & Shipman, but still pretty decent.

A pair of Hobbymat - Prazimat Lathe belts. Top quality, made in Germany. For smooth, vibration-free running at high speeds it is recommended that both belts be changed at the same time. Two sizes: Short: 8 x 375 and Long: 8 x 425
A belt for the Hobbymat - Prazimat Wood Lathe Models MD120 and MD150 click here to order
 

Toothed drive belt for Emco V10 and V10 Mentor lathe. The belt should be 19 to 20 mm (3/4") wide and possibly marked 200XL x 75, iIf so, this belt is correct. However, some late versions of the V10 appear to have been fitted with the 25 mm wide (1") belt from the V10P. If your belt is missing, just measure the width of the toothed pulley. If the pulley is 25 mm (1") wide you'll need the V10P belt that can be ordered here: https://store.lathes.co.uk/parts/drive-belt-emco-v10p-lathe

Emcomat 7 and 7L lathes: Toothed Drive Belt. Only the 3/4" (19 mm) wide belt is now available. The 1-inch (25mm) belt is no longer made. If you lathe has the wider belt,. the narrower one will still work but, if the lathe is hard used, will not last as long.

OUT OF STOCK - But we would like to make more. Unfortunately, our pattern has been lost and we need one sample top slide to work from. If you can help, please phone 01298-872871 or 01298-872874.

Tailstock rotating centre. No.2 Morse taper (appearance may differ from the photograph but the specification is the same).

For a No.1 Morse taper rotating centre see; https://store.lathes.co.uk/parts/tailstock-rotating-centre-no-1-morse-taper

An inexpensive plastic vernier caliper that will accurately measure thread diameters.

A proper, European-made, high-quality, machine-tool class on-off and reversing switch (it can also be used as a simple on/off switch) with a maximum capacity is 5 hp. It will run either a 1-phase or 3-phase motor and is fitted in a neat box-type 64mm x 64mm x 57mm deep plastic enclosure easily attached to a suitable bracket or flat surface. Inside the housing the switch unit itself is cylindrical, very compact, and can be removed for insertion in another holder should this be necessary.

Strips of the correct density felt (made in Germany) that can be cut and packed into the holders: each strip is 150 mm long, 10 mm wide and 8.5 mm deep which is usually enough to make a set of bed-wiper for a lathe or other machine tool. The felt often be cut down to act as a wick of the type used to lubricate some types of plain bearings.

Fobco "Star" and "Universal" Drill Drive Belt: this is a European-made, high-quality, machine-tool grade belt with an invisible joint that, unlike cheap imports, does not bump as it goes around the pulleys and ensures the smoothest possible drive. The belt fits all models of Fobco "Star" and "Universal" drills.  Details and specifications of all Fobco drills can be found here

Fobco 7/8 and 10/8 Drills Drive Belt: This is a European-made, high-quality, machine-tool grade belt with an invisible joint that, unlike cheap imports, does not bump as it goes around the pulleys and ensures the smoothest possible drive. Details of Fobco drills can be found here    For the Fobco Star drill belt, click here.

Sold by various importers including Axminster, Chester, Warco, etc. The "920", "CT-918" lathe and other Model Numbers - a Chinese-made lathe that was, in effect, a developed copy of the Emco Compact 8.. This is a narrow, 5 mm wide V-belt - and is normally tensioned by a lever on the headstock. This belt is a top-quality, USA-made product.

Emco V10 & V10P output gear for the changewheel drive. 45 teeth, 2-pin steel hub. Original Part Number: C3Z-011-060. The gear supplied can be in white or black material.

Adjustable boring bar to suit a small lathe

Boxford, South Bend & Smart & Brown 100/127t inch to metric screwcutting transposing gear. This gear set will convert all imperial (inch) belt-drive Boxford lathes (except the late VSL Type), the South Bend 9-inch and the Smart & Brown Sabel, SAB and S lathes to cut metric pitches.

Boxford and South Bend Lathes: Metric to inch screwcutting conversion gear 127/135T

Main drive belt for the Emco V10P.
Belts for the Emco V7, V8 , 8.4, 8.6 and V8 lathes can be ordered here and belts for the Emco V10 lathe here

Raglan "5-inch" Tumble-reverse gear. This gear has 26 teeth in cast iron UK made by a precision engineer. If in doubt about which Raglan lathe you have, check our article here: http://www.lathes.co.uk/raglan  Tumble reverse gears for the earlier Raglan "Little John" are here: https://store.lathes.co.uk/parts/raglan-little-john-tumble-reverse-gear

For the more common Kennedy "Hexacut" Model 60 hacksaw the flat belt is normally 1" (25 mm) wide and 21.8" long (554 mm) - however, because the size may have changed over the years, it would be safer to measure yours to get an exact figure. As the belts are custom-made, if you order the wrong length a refund is not possible. An accurate measurement can be taken around the pulleys with a strip of paper stretched around, overlapped, marked, and then carefully measured. Please put the length details in the order comments box.

No.3 Morse taper rotating centre: A heavy, large-bodied unit idea for use on Colchester Bantam, Student, Master, Triumph and similar 5.5 inch to 8-inch lathes such as the Harrison L5, L5A, 11-inch, 140, Kerry, etc

For a No.1 Morse taper rotating centre see: https://store.lathes.co.uk/parts/tailstock-rotating-centre-no-1-morse-taper

No.1 Morse taper tailstock rotating centre - suitable for wood or metal lathes.

For a No.2 Morse taper rotating centre see: https://store.lathes.co.uk/parts/tailstock-rotating-centre-no-2-morse-t…

For a No.3 Morse taper rotating centre see: https://store.lathes.co.uk/parts/no-3-morse-taper-rotating-centre