TOS "MAS" VRM-50A Universal Radial Drilling Machine: Parts Manual as Sectional Drawings.

TOS Drilling Machines Types V20, VS20, VS32, VN20, Two editions of the "Manual & Specifications" and "Technical Documenation" including an electrical diagram and some Sectional Parts Drawings.

TOS SU16A Miniature Precision Lathe. Operator's Instruction and Maintenance Manual.

TOS SU16A Miniature Precision Lathe. Parts Manual as Exploded Component Diagrams.

TOS MN80 and MN80A (and the Russian-built copy Type TB16) Miniature Precision Lathe. Operator's Instruction and Maintenance Manual. Available with English, German or CZ text.

TOS S28 Lathe. Operator's Instruction and maintenance Manual with Many Parts shown as Sectional Drawings and an Electrical Schematic. Contains extensive details of bearing and slide adjustments, use of accessories and a comprehensive section of  screwcutting data

TOS SN-40C and SN-50C Lathes: Operator's Instruction and Maintenance Manual. Although clear, this reproduction of this manual is not to out usual very high standards.

TOS SN-40C and SN-50C Lathes: Spare Parts Manual as Sectional Drawings, Electrical Diagrams and reproductions of the frequently damaged screwcutting charts.

TOS SN-40, SN-45, SN-50, SN-40B, SN-45B and SN-50B Lathes: Operator's Instruction and Maintenance Manual and a separate Parts Manual. The two manuals were originally published individually - but both are required - the Operation and Maintenance Manual refers continually to Part Numbers that are only in the Parts Manual.

TOS SN55A, SN63A, SN71A, SN-55B, SN-63B and SN-71B Lathes: Parts Manual as Sectional Drawings with Electrical Schematics and reproductions of the (frequently damaged or missing) Screwcutting Charts.

TOS SU1-40A and SUI-50A Lathes: Operator's Instruction and Maintenance Manual.

TOS SUI-63 and SUI-80 Lathes: Operator's Instruction and Maintenance Manual (large-edition version). Includes a copy of the maker's Sales & Technical Specification Catalogue.

TOS R5 Capstan Lathe. Operator's Instruction and Maintenance Manual with Electrical Schematics.

TOS R5 Capstan Lathe. Main Parts as Sectional Drawings with electrical schematics and foundation plan.

TOS Miller Vertical Head Model "IFV" to fit Models F20, FG32 and FG40 Millers

TOS FA2H, FA2V and FAU Milling Machines. Operating Instructions with an Electrical Schematic.

TOS KZA-2 Hydraulic Copying and Slotting Attachment for the FA2V Milling Machine. Operating Instructions, Sectional Drawings and an Electrical Schenatic.

TOS FA Milling Machines - FA3-H, FA3-U & FA3-V (Horizontal, Universal & Vertical) milling machines. Operator's Instruction and Maintenance Manual. Includes a copy of the maker's comprehensive and well-illustrated 103-page Sales, Specification and Accessories Catalogue Covering the FA2, FA3, FA4 and FA5 Models

TOS FA-3H, FA-3U and FA-3V (Horizontal, Universal & Vertical) millers. Parts Manual as Sectional Drawings with Electrical Schematic.

TOS FA3A Millers FA3A-H, FA3A-U & FA3A-V (Horizontal, Universal & Vertical) millers: Operator's Instruction and Maintenance Manual. The various Figures referred to in the text are found in the separate Parts Manual shown below.

TOS FA3A-H, FA3A-U & FA3A-V (Horizontal, Universal & Vertical) millers (also useful for the earlier and very similar FA3 Series machines). Parts Manual Sectional Drawings with Electrical Schematic.

TOS FA4 Series Millers. This edition is for the FA4V, but the complete base section and table, etc, is identical across the range. The text section of the manual is poor - but readable. The technical  drawings are fine.

TOS "HVB" Miller Vertical Head Model to fit Models FB25, FA3, FA4 and FA5 Millers. Operator's Instruction and Maintenance Manual with Parts as sectional Drawings

TOS FA-5H (Horizontal) Miller - covers most of the FA-5U - the same machine but with a swing table. Operator's Instruction and Maintenance Manual with Parts as Sectional Drawings.