VICEROY Lathes: A complete data pack for all metal-turning models consisting of every piece of literature discovered for these models. All the early Viceroy lathes in the "TD" Series were based on a single model and varied according to its particular use. Models varied from comprehensively equipped metal-turning lathes with a screwcutting gearbox and power cross feed to simple, plain-turning versions that just used a bed, headstock carriage and tailstock. Some were limited production versions with odd specifications including dual metal and wood lathes with a power-feed carriage but no screwcutting and with and without backgear. The literature includes the Installation and Operating instructions (covering the TD, TDS (and variants) and the later Variable-speed (280 and Synchro) and "Educator" models (again, both based on many common parts) in both plain-turning and screwcutting versions and those lathes constructed as dual metal-wood lathes (Viceroy TDS3/CM, WL, Type 250, etc.) screwcutting charts, additional screwcutting charts and important advice relating to the operation of the screwcutting gearbox and metric/English conversions and lubrication requirements. Several sheets of advertising material are also included from which the lathes' original specifications and range of accessories and fittings can be deduced. Includes an additional 10 pages of notes by Tony Griffiths of lathes.co.uk on Viceroy lathes and drills.