Binns and Berry lathes. 6.5, 7.5, 8.5 7 9.5-inch lathes - older type with twin vertical slots on face of apron. Operator's hand book with Spares as Sectional and Exploded Component Drawings and a copy of the 4-page Sales catalogue.
Model: 7.5-inch
This page displays all the content on the website associated with the '7.5-inch' model. Numeric models include all prefixes, such as 'Number', 'Mark', 'Size' etc.
Manuals for Model: 7.5-inch
Rex Hacksaw "Six-and-a-half M", 7.5", 10", 12" single-speed and 12" two-speed. Includes two very detailed and well-illustrated sales and specification catalogues for the Models 6-and-one-half M and the 7.5-inch and 10-inch models together with a two-page guide to the Automatic Blade Relief Action and "Instructions for Clearing an Airlock", two sales sheets for the 12-inch single and two-speed models and one for the "Junior" Model.
Velox (Elliott and Gates) Hacksawing Machines 7.5", 10" and 12". Operator's Instruction and Maintenance Manual and Parts Manual as Exploded Component Drawings. Includes 4 copies of the maker's Sales & Technical Specification catalogues.
WILLSON 7.5-inch and 8.5-inch Lathes: Instruction Manual and Illustrated Parts Manual for the model with two concentrically-mounted levers on the front face of the flat-topped headstock and with a clutch lever on top of the headstock pointing forwards. The screwcutting gearbox has two levers and, between them, a sliding tumbler selector. Includes a copy of the maker's Sales and Specification Catalogue. (Some versions, internally identical, had a "quadrant" arm to locate the speed change lever). Includes a copy of the maker's Sales and Specification Catalogue.
Willson 7.5-inch (suitable for the 8.5-inch as well). Parts Manual as exploded-component drawings.
WILLSON Mk. V 7.5-inch "Newel" and "Willson/Elliott". Listed by the makers as the Canel Mk.V when fitted with a straight bed and the Newall Mk. V with a gap bed. Also, usually fitted with a “Universal” English and metric screwcutting gearbox Instruction.Manual and Illustrated Parts Manual (as useful sectional drawings) for the model with the large circular (or semi-circular) boss on the headstock and a circular control on the face of the screwcutting gearbox.
WILLSON 71/2" and 81/2" lathes. Sales & Technical Specification Catalogue. 8 pages