Burdett Elliott 70, 75, 77 "Rapidgrind" Surface Grinders Mk.2 (identifiable by a round cover over the grinding wheel, two main controls wheels one above the other on the face of the stand and to the right an "oval" shaped cover with a single control knob positioned centrally near the bottom ).

Larvic Rehabilitation Wood-turning lathe (treadle-operated). Instruction Book. Two editions are included covering both the Mk.1 and Mk. 2 Machines

Kearns No. 2 and No. 3 Horizontal Boring and Facing Machines. Operator's Instruction, Installation and Lubrication Manual. Includes a copy of the comprehensive and useful technical Sales and Specification catalogue.

Harrison Lathe AA Mk. 2 VS330TR Mk.2. This is the later model with "Square" styling and very similar to the V330. 13-inch swing variable-speed drive precision lathe. Instruction Manual, Maintenance Manual and Parts Manual as useful Exploded Assembly Diagrams. Includes Electrical Diagrams.

Newall Jig Borer No. 1 Operating and Maintenance Manual with Electrical schematics. The Newall No. 1 was renamed the Model 2436 and then, with just a greater table capacity, as the Model 2436 Mk. 2 and then - finally - re-numbered as the Model 2443.

Newall Jig Borer Model 2436 Mk. 1 and Mk. 2 Operating and Maintenance Manuals (three editions are included) and a copy of the Maker's Sales and Specification and Accessories Catalogue. Includes the separate Operating Notes for the 1520 Airmec Jig Borer.

Downham Mini Jig Borer (also badged Elliott, Gate and Excel) A complete data pack for the machine containing all known literature with the Operating and Maintenance Manual and Parts as Exploded Component Drawings.. Covers the Mk. 1, 2 and 3 models and the Electrical Manual for the variable-speed Mk. 3.

Kitchen and Wade Radial Arm Drill Type E32 Mark 1 and Mark 2. Operator's Instruction Manual with Spare Parts Manual as Exploded Component Drawings with a separate electrical schematic and a copy of the detailed Sales & Specification Catalogue.

Boley Lathes: 1A, 1B, 2BE, 1BH, 1HM, 1HME, 2HME, Sizes 1, 2, 3, 4, the high-precision F1 and the late Model 4L. A Catalogue of Boley lathes made from the 1950s to the 1960s. Includes Watchmakers', Precision Plain-turning and Production, Bench, and Backgeared and Screwcutting types. 38 pages.

Boley Lathes Sales Folder showing the entire lathe range as it was in the 1950s and 1960s. "Miniature Precision" models Sizes 1, 2, 3, and 4. Screwcutting models: 4E, 4H, 4PS and 4L. Super Precision model: DW4; Turret model: REV 25. Also shows the srills, the  Sensitive BE2, Multi-spindleVBef13 and VGHe10. 6 pages

Smart and Brown Model A Lathe Mk.1 and Mk.2: a complete Data Pack consisting of two editions (early and late) Operation & Maintenance Manuals with electrical schematics, Spare Parts Manuals as detailed sectional drawings and a copy of the comprehensive Sales and Specification Catalogue.

Colchester "Colt" - a version of the Mk. 2 Bantam identifiable by a box on the top of the headstock holding the electrical switchgear and the use, on the screwcutting gearbox, of the 6-position joystick lever (as also employed on the original Mk. 1 Bantam).

Herbert FlashTapper No. 2 Data pack with: Operator's Instruction Manual with an Electrical Schematic and clutch-adjustment instructions, and early and late Sales & Technical Specification Catalogues

Jones Machine Tools (Pootatuck USA) - kit-built from castings. All the drawings are perfect and enlarged for extra clarity to A3 size 11.7" x 16" on a high-quality 120g paper (in the USA this is equal to a premium-quality 80 lb Book/Text paper)

Edgwick No.1 Keyseating Machine (Mark 2) Spare Parts List with exploded component diagrams.

Includes diagrams of:

• Cutter Spindle & Main Motor Assembly
• Column Front & RH Side Details
• Depth Feed Mechanism
• Feed Drive and Crank Motion
• Column & Coolant Details
• Knee, Saddle & Table
• Vice

Herbert No. 2 Flash Tapping Machine Parts Manual. Includes photographic plates of all the components, and covers the No. 2 Flash Tapping Machine before it was known as the FlashTapper.

PROJECTORSCOPE Models 2 and 4 (by Precision Grinding Ltd) Two Operator's Instruction Manuals with copies of the maker's Sales & Technical Specification Catalogues.

Repair Parts for Attachments used on Brown and Sharpe Automatic Screw Machines (Including Turret Forming, Cutting-Off and Screw Threading Types).

Consists of photographic plates of parts for the following attachments:

Brown & Sharpe No. 2 Vertical Milling Machine Blueprints, six sheets

KEARNS Borers and Planers. Comprehensive Full-Range Sales & Technical Specification Catalogue showing the "S" Type, "S" Type Optimetric, "45", "72", "450", "450A", "450B", 450C", "450F", "451P", "451F", "450PPT", "4551PPT", Electronic Model "451PPT", "721P", the No.2, 3, 4 & 5. No. 4WB, No. 5WB, and details of various control systems and accessories. 80 pages.

Alexander (George Alexander GHA) Pantograph Engraving and Die-Sinking Machines Nos. "1", "1A", "1B", "1-2", "2", "2A", "2B" and "3A" and 3 Series. These engravers were copies of contemporary Deckel machines - all based on the Deckel G1L.

Pollard Auto-reversing Tappers. Detailed 6-page Sales and Technical Specification Catalogue covering all types and sizes.

BSA-Huller Electrically Operated Tapping Machines (1, 2, 3 and 5) Operating Instructions with Sectional Drawings.