Model: 3A

This page displays all the content on the website associated with the '3A' model. Numeric models include all prefixes, such as 'Number', 'Mark', 'Size' etc.

Manuals for Model: 3A

Print code: B799B

Brown & Sharpe Milling Machine Catalog dated 1928 giving technical specifications, annoted pictures showing the operation of the various controls and interesting constructional details of the ""Standard" range for the Models 2A, 3A, 2B, 3B.  36 pages.

Print code: H354B

HERCUS 3A Tool & Cutter Grinder. Sales & Technical Specification Catalogues. 4 pages.

Print code: M15

Marlow Vertical Millers: No manual was produced for these millers but the following Sales and Specification Catalogues are available: Models Standard 1, 2 and 3, 3A, 4-DF and 5-DF, TM-10, TM-10A. 7 pages.

Print code: M24

Three MATHEYS "Semi-Jig Boring Machines" Catalogues. All are highly detailed with many illustrations, annotated control diagrams, some sectional drawings, Accessory Listings and price lists. The first, in English, with 8 pages, covers the Types FPN-28 and FPN-PO; the second concerns the SP-30 and SP-35, the third, is a 6-page Catalogue in German covering the SP-30, 35-NC and 3A models. 32 pages in total

Print code: MA500A

Alexander (George Alexander GHA) Pantograph Engraving and Die-Sinking Machines Nos. "1", "1A", "1B", "1-2", "2", "2A", "2B" and "3A" and 3 Series. These engravers were copies of contemporary Deckel machines - all based on the Deckel G1L. Detailed Operator's Instructions with sectional drawings of all the cutter heads (these have been scanned at high resolution and enlarged to full-page size).

Print code: MA500B

Alexander - Deckel  (George Alexander GHA) Universal Die-Sinking and Engraving Machines Parts Manual as detailed Sectional Drawings for Models: 1A, 1B, 1BS, 2, 2A, 3A, 3AS and No. 1 "Standard" and No. 2 "Deep-throat" (based on the Deckel G1L). The sectional drawings for the various spindles have been enlarged to full-page size.

Print code: MA500E

George Alexander GHA Universal Die-Sinking and Engraving Machines. Not a manual but a detailed "Technical" Sales and Specification and Specification Catalogue that contains useful operating data, charts and details of the complete accessory range and how to mount it - includes two additional separate Sales and Specification and Specification sheets.

Print code: MB662

Brown and Sharpe Comprehensive Parts Publication for the 2A, 2B, 3A, 3B machines

Print code: MB664D

Brown and Sharpe Nos. 2, 3, 2A, 3A Vertical Millers Universal and Plain Models. Repair Parts Manual. Individually Illustrated and Numbered Spares.

Print code: MD218G1

Alexander (George Alexander GHA) Pantograph Engraving and Die-Sinking Machines Nos. "1", "1A", "1B", "1-2", "2", "2A", "2B" and "3A" and 3 Series. These engravers were copies of contemporary Deckel machines - all based on the Deckel G1L. Detailed Operator's Instructions with sectional drawings of all the cutter heads (these have been scanned at high resolution and enlarged to full-page size).

Print code: MD270F

Drummond Maxicut 3A Gear Shaper: Operator's Instruction Manual (sometimes badged "Hoblique" and "Staveley") with a Sales & Technical Specification sheet.

Print code: MD383

DIAFORM Wheel Forming Attachment . A Data pack with a copy of the Diaform Booklet "Form Dressing with the Diaform Wheel Forming Attachment" - a detailed guide as to what the machine can achieve with illustrated examples of work and issued with the the early Diaform Models A, B, AT, BT, 2A, 2B, 3A, 3B, 4A, R and 4B. Includes copies of the maker's Sales & Specification Catalogues.

Print code: MD383S

Diaform Servicing and Adjustment Manual for Vertical Types A, B, AT, BT, 2A, 2B, 3A, 3B, 4A, R
and 4B
. Includes several useful sectional drawings.

Print code: ME5/E20

Eagle Surface Grinders: Unfortunately no manual appears to have been issued for these machines but there is an interesting collection of Sales and Specification Catalogue available for the early and late Standard and Heavy Duty Models 1, 2, 2A, 3, 3A, 4, 4A, 5, 6; the Model 534 in Mk.1 and Mk.2 versions together with a price list. This collection represents the complete data set for these machines. 13 pages.

Print code: ME600B

Excel No.3, 3A and 3C Surface Grinders. Operator's Instruction Manual with Parts List as Component Photographs.

Print code: MH407

HERBERT AUTO LATHES "Production on Auto-lathes" a 36-page A4
Booklet illustrating the No. 3A, 4, 5A, 5A-33, Auto-Junior lathes and showing a
variety of typical set-ups that assist in determining the best application of the Auto lathe.

Print code: MH414A

Herbert 3A Auto-lathe Mark 1: Maintenance Manual.

Print code: MH414B

Herbert 3A Auto-lathe Mark 2: Service and Maintenance Manual.

Print code: MH414C

Herbert 3A Auto-lathe Mark 1 and 2: Spare Parts Manual as Exploded Component Diagrams.

Print code: MH414E

Herbert 3A Auto Lathe Mk. 2: Operator's Instruction Manual.

Print code: MM375

Mitts and Merrill Keyseater Sizes 2, 3, 3A, 5 and 6. Instructions for Operator's Instruction and Maintenance Manual. Includes 11 large blueprints not in the original publication.

Print code: MM375A

Mitts and Merrill Keyseater Sizes 3A. Instructions for Operator's Instruction and Maintenance Manual including some Sectional Drawings.

Print code: MM538B

Myford Mini-Kop Mk. 3 and 3A  - identified by its flat-fronted cabinet with a control box on the right-hand side:  Detailed Instruction Manual, Workshop Manual and Parts Manual as Exploded Component Drawings. Read all about Min-Kop lathes here http://www.lathes.co.uk/myfordminikop/

Print code: MP10C

Parkson No. 3 Series Milling Machines Models: 3V/3, 3V/3A, 3V/3M, 3V/33, 3N/1, 3N/3, 3N/33, 3NP/1, 3NP/3, 3NP/3M, 3NP/3A, 3NP/33, 3NU/1, 3NU/3, 3NU/3A, 3NU/3M, and "Millermatic", etc. Operator's Instruction Manual.

Print code: MP10D

Parkson No. 3 Size Milling Machines Models: 3V/3, 3V/3A, 3V/3M, 3V/33, 3N/1, 3N/3, 3N/33, 3NP/1, 3NP/3, 3NP/3M, 3NP/3A, 3NP/33, 3NU/1, 3NU/3, 3NU/3A, 3NU/3M, and "Millermatic", etc. - Illustrated Parts Manual that covers all Vertical and Horizontal Models with detailed Exploded Assembly Diagrams.

Print code: MP10J

Parkson Miller-Matic 3A: Spare Parts as Exploded Component Drawings.

Print code: MP700D

PROGRESS 3A Drill Operation Manual and Parts Manual as Exploded Component Drawings together with a copy of the maker's technical specification catalogue.

Print code: MV500A

VOUMARD Type 3 (3ACH,3APCH, 3-32 and 3A, etc.) Internal Grinding
Machines:
Highly Detailed Operator's Instruction and Maintenance Manual with Sectional Drawings and large Hydraulic and Electrical Schematics.

Print code: MV500B

VOUMARD Type 3A Machine-specific Internal Grinder: Detailed Operator's Instruction and Maintenance Manual with Sectional Drawings and large Hydraulic and Electrical Schematics.

Print code: MW250

Ward Capstan and Turret Lathes. Ward's system for Manuals included the publication of this very comprehensive but non-machine-specific 78-page "Operator's Instruction Manual, Instruction Manual and Catalogue" and to back this up with smaller publications to explain the operating peculiarities of individual models (listed below).

Print code: MW250M

Ward No. 3A Capstan Lathe: Detailed Operating Manual and a Technical Advertising Catalogue.

Print code: MW250MCS

Ward No. 3A Capstan Lathe with chasing saddle - Technical Sales and Specification Catalogue to accompany MW50M.

Print code: MW290D

Warner and Swasey No. 1A, 2A, 3A and 4A Turret Lathes Service Manual with Installation and Maintenance Instructions.

Print code: MW290M

Warner and Swasey 3A Turret Lathe Model M-3500: Installation, Alignment, Adjustment, Operation and Spares as Detailed Exploded Component Drawings.

Print code: P-141

Elliott High Speed Pillar Drilling Machines 3A - 1¼" Capacity. Sales sheet including photographs, general diagram and specifications.

Print code: P759

Progress Drills - all smaller types. A set of detailed catalogues for the No. 16, No. 16S, Junior 3/8", Junior 1/2", Junior 1/2" Pillar, No. 0 (1/4" capacity), No.1 and No. 1S early, No.1 and No. 1S late, 2G, 2GS and 3A. 26 pages.

Print code: W33A

Ward Turret & Capstan Lathes Full-range Sales & Technical Specification Catalogue circa late 1940s to the 1950s. Shows Models: OE, 1A, 2A, 3A, 7, 7 Combination, 8 Combination,
10 Combination, 13 Combination, 16 Combination, "Hexagon Turret for Bar Work" and Special Tool Layouts, English, German, French & Spanish Text. 28 pages.
<br>

Print code: W33B

Ward Turret & Capstan Lathes Full-range Sales & Technical Specification Catalogue circa late 1950s onwards. Shows Models: 2A, 2DS, 3A, 3DS, 7DS, 7 Combination, 7 Prelector, 8 Combination,
10 Combination, 10/13 Combination, 16 Combination, Hydraulic Copying Attachment and Special Tool Layouts, English, German, French & Spanish Text. 40 pages.