Model: 28

This page displays all the content on the website associated with the '28' model. Numeric models include all prefixes, such as 'Number', 'Mark', 'Size' etc.

Manuals for Model: 28

Print code: L290

LePont Lathes: 16", 20", 24", 28", 34", 40", 48", 56", 72" two well-illustrated Sales & Technical Specification Catalogues. 12 pages

Print code: MA660D

ARCHDALE 1 1/4" and 2" Vertical Drilling Machine with a fixed head and sometimes marked Type 14589 Operator's Instruction and Maintenance Instructions - two editions: one for the stand-alone vertical drill the other for the same heads fitted to the radial-arm types; these manuals cover all known versions. The drill was also available with a number of different tables including compound screw-feed or plain types and shared its head with a number of radial-arm and other drills.

Print code: MD341

Delta Vertical Band Saw. Model 28-340 with 20-inch capacity. Instruction Manual with Parts as Exploded component Pictures.

Print code: MD341A

Delta 12" Vertical Band saw. Model 28-190. Instruction Manual and Parts List as exploded Component Diagrams.

Print code: MD341B

Delta 14" Vertical Band saw. Models 28-293 and 28-299. Instruction Manual and Parts List as exploded Component Diagrams.

Print code: MD341C

Delta 20" Vertical Band saw. Models 28-340. Instruction Manual and Parts List as exploded Component Diagrams.

Print code: MD341D

Delta 20" Vertical Band saw. Models 28-365 and 28-366 (Metal and Wood capability). Instruction Manual and Parts List as exploded Component Diagrams.

Print code: MG255

Gallmeyer and Livington (Grand Rapids) Surface Grinders Models 25, 28, 35, 36, 38A, 45, 45A, 45B, 55, 55A, 55B, 65 and 65A. Operator's Instruction, Maintenance and Lubrication Manual. Includes a separate and detailed Maintenance and Parts Section for the Vickers Hydraulic pump and Instructions for the Rectifier and Control System for the Magnetic Chuck/Table. Additional instructions concern the preparation, truing and mounting of Magnetic Chucks.

Print code: MG58E

Fischer +GF+ KDM 18-28/F Copying Lathe. Detailed Operating Instructions and Maintenance.

Print code: MG640V

Gleason Nc/75 Ratio of Roll and Compound Change Gear Tables and Tables of Ratios and their Reciprocals for the following machines: 15" Spiral Bevel Generator, 15" Hypoid Generator, No. 16 Hypoid Generator, 25" Spiral Bevel Generator, 25" Hypoid Generator, No. 26 Hypoid Generator, No. 16 Hypoid Rougher, No. 26 Hypoid Rougher, 12" Straight Bevel Generator, No. 14 Straight Bevel Generator,No. 24 Straight Bevel Generator, 25" Straight Bevel Generator and No. 28 Hypoid Generator.

Print code: ML10H

Lang Lathes all early Models - including the "Junior" - a general guide to their Installation, Operation, Maintenance and Adjustment - includes: "Operation of Lang Junior lathes", "Operation of Lang Lathes" and "Installation of Lang Lathes" These booklets describe, variously, setting the foundations for Lang machines, and how to lift them. They also provide useful information on adjusting the clutch, brake, flanged spindle nose, spindle bearings, spindle sleeve, revolving centre and pump and clear photographic plates of several machines.

Print code: MM400

RBM 28 & 2ll8B Geared-head drill. Operator's Instruction Manual and Illustrated Parts Manual.

Print code: MU125

U.S. Baird Multi-Slide Machines Models 28, 33 and 35. General Instructions and Parts as Exploded Component Drawings.

Print code: MW325J

Weiler RDU-260, 260/28, 260/38. 260/38-Z, 260/38-D (etc) Capstan Lathe. Operator's Instruction and Maintenance Manual with Parts Manual as Sectional Drawings.