BOXFORD Machine Tools: a Special Catalogue Data Pack of all products that shows the conventional machine tools made by the Company. Spans from the very early 1940s 3-inch Precision Lathes and Rear-drive models to the later Underdrive types and the final Geared-head versions.

SENECA FALLS Lathes Data Pack including: the Operator's Instruction Manual and Replacement Parts Manual (a useful though generic publication the company sent out in the 1930s when enquiries were made about their older machines) and four Full-range Catalogs: No. 20B circa 1905; No.

Brown and Sharpe Automatic Screw Machines Attachments - Repair Parts Manual

Ward, Haggas and Smith (Keighley) Lathes. Beautifully illustrated and
comprehensive Full-range lathe Catalogue circa 1931. 83 pages

Rockford General catalog 1956 including details of the last version of the "Economy" lathe and the company's hydraulically powered ram-type shapers, conventional and open-sided planers, a combination Shaper-planer, slotters and the Kopy-Kat duplicator

Rockford General catalog 1956 including details of the last version of the "Economy" lathe and the company's hydraulically powered ram-type shapers, conventional and open-sided planers, a combination Shaper-planer, slotters and the Kopy-Kat duplicator

HAMILTON Machine Tool Co. (USA) Lathes & Planers. Comprehensive Catalogue circa 1913 - 1915 showing the machines generally available from around 1905 to 1920. 64 detailed pages.

MONARCH Lathes USA "Features of Monarch Lathes" booklet. Comprehensive and beautifully illustrated 56-page edition clearly describing the special design features and accessory offered by Hendey. Dated 1935 and showing features used from the 1920 to the 1940s.

MONARCH Lathe Accessories (1930s). Superbly illustrated 40-page production showing not just the accessories but also the specification and design features incorporated in the company's lathes.

MONARCH Lathe Catalogue circa 1919 - not a manual (there were non for the
early lathes) but precise technical details are given of a huge range of
Monarch lathes and accessories of the type built between 1909 and approximately
1927. If you have an early Monarch lathe, this seems to be the only data
available.

Rivett Patent Drawings. 91 interesting pages with details of many Rivett patents including such things as the 8-inch Precision Spiral Milling Attachment.

MITCHELL Catalogue Collection covering most models made from the 1950s onwards including the Junior 70, GVM6, NM Series, OM Series, VM Series, DM Series, OM Series, NM Series (in all flat and V-bed types) M-Type, L-Type, and the 6.5, 7.5, 8.5, 10.5, 12.5, 14.5 and 16.5-inch Lathes. 152 pages.

WALDRICH SIEGEN Large Machine Tools. Full-range catalogue circa 1960s: High-speed lathes, Roll-turning Lathes, Roll Grinders, Planers, Combination Planer and Milling Machines. 16 pages.

Clement Watchmakers' Lathes: a data Pack as all known literature: a very rare Watchmaker's Lathe Sales Booklet. 1923. Salvaged by being sandwiched between glass sheets and scanned. Not all pages are complete, some are very fragmented - but, what a remarkably eccentric production. 26 pages.

A combined publication containing "Herbert Turret Lathe Work" and "Turret Lathe Tooling". All the data needed to run these manual production lathes. £95 (saving £30 on the individual prices)

Tools for Shaping Machines and Lathes. A complete guide to choosing, sharpening and using correctly all the cutting tools likely to be used on a shaping machine or lathe. Includes details of the various types of tools available and how they are used; materials used and how to grind and form cutting edges, etc.
 

A780Y Ames Precision Machine Tools: a set of three later catalogs:
(1) Ames No. 3 Precision Bench lathe Sales & Technical Specification Catalogue. Also shows the Ames miller and Ames Triplex Machine - a lathe and miller combined. 16 pages.

HJORTH (USA) Precision Bench Lathe. Beautifully illustrated Catalogue No 5 60 pages.

Brown and Sharpe Screw Machines. Detailed 70-page Catalogue of Screw Machine Tools, Spring Collets and Feeding Fingers.

Brown and Sharpe Automatic Screw Machines. Construction and Use Manual - a wonderful 333-page book written for the operator showing every aspect of how the machines work and to set up and operate these incredibly reliable and robust machines.

Cataract (Hardinge) Unfortunately there was never a "Manual" for the Cataract lathe and millers - but there is a wonderful full-range Catalogue showing all the Precision Bench and Screwcutting Lathes (including a complete catalog for the wonderful "Quick-Change" model), Milling Machines, Automatic Gear and Pinion Cutters, Drills and the full accessory range made from the early

CATARACT (Hardinge) Wonderful Full-range Catalogue of Precision Lathes & Millers of the 1930s. Includes bench precision lathes, milling machines of the MD3, MD4 horizontal millers, BB2V (the vertical version of the horizontal BB4) and MD5 (horizontal with conventional overarm) types. Automatic Gear & Pinion Cutters, Drills and the full accessory range.

Herbert Turret and Capstan Lathe Tooling - Two comprehensive, well-illustrated and detailed editions - one early with 22 pages and the other late with 82 pages - showing every variety of tooling made for these lathes. The original small dimensioned drawings that show the various sizes of tools available have all been scanned at high resolution and enlarged.

Everything for Drummond Machine Tools - a high-quality, enlarged to A4 publication. Includes the following separate publications bound as one: Drummond Hints to Purchases of Lathes (1920 - text only). 19 pages. D244A Drummond: Very early Catalogue for 3.5" Model B flat-bed lathe. 8 pages. D244C Drummond Very early lathes: Full-range Catalogue. 45 pages.