Quick-change Toolholder for small lathes up to 100mm (4") centre height - Myford ML10, ML7, Compact 8, etc - "Dickson" type with central block and complete with 4-stations to hold standard, parting-off and boring tools: All parts hardened and ground.

Quill-return spring for Fobco "Star" bench and floor models - a genuine maker's original part. The spring, coiled-up, is 1.5 inches (37 mm) in diameter and 0.5 inches (13 mm deep). Details of a spring for the larger Fobco 7/8 and 10/8 drills can be found here.

Quill-return spring for Fobco 7-Eight and 10-Eight models - the maker's original specification, UK-made part. Not to be confused with the thiner, fewer-coil and inferior type sometimes advertised on ebay.   The spring is 0.75 inches deep (19 mm) by 2.45 inches (62 mm) in diameter over the coils.
Details of the spring for the smaller Fobco "Star" drill are here.

OUT of STOCK  Diameter: 160 mm 6.3" 1.75" x 6 tpi square thread

Emco Compact 8 lathe. The correct USA-made, high-quality 5mm wide, narrow V-belt drive belt.
The other belt, a toothed type, can be ordered here  https://store.lathes.co.uk/parts/emco-compact-8-warco-ct-918-intercity-pinnacle-naerok-lathes-toothed-drive-belt

Toothed drive belt for the Emco Compact 8 lathe - also fits the very similar lathes branded as the  CT-918 by Warco, Excel, Intercity, Pinnacle and Naerok, etc.
- The other belt, a narrow 5mm wide drive belt for the Emco Compact 8 lathe can be ordered here

Screw pitch gauge - now double-sided - to measure both Whitworth (55-degree angle) and Metric (60-degree angle) threads. Includes templates for all common sizes. This is the best quality one that I've been able to find - not as good as a traditional Jones & Shipman, but still pretty decent.

Toothed drive belt for Emco V10 and V10 Mentor lathe. The belt should be 19 to 20 mm (3/4") wide and possibly marked 200XL x 75, iIf so, this belt is correct. However, some late versions of the V10 appear to have been fitted with the 25 mm wide (1") belt from the V10P. If your belt is missing, just measure the width of the toothed pulley. If the pulley is 25 mm (1") wide you'll need the V10P belt that can be ordered here: https://store.lathes.co.uk/parts/drive-belt-emco-v10p-lathe

Emcomat 7 and 7L lathes: Toothed Drive Belt. Only the 3/4" (19 mm) wide belt is now available. The 1-inch (25mm) belt is no longer made. If you lathe has the wider belt,. the narrower one will still work but, if the lathe is hard used, will not last as long.

OUT OF STOCK - But we would like to make more. Unfortunately, our pattern has been lost and we need one sample top slide to work from. If you can help, please phone 01298-872871 or 01298-872874.

Tailstock rotating centre. No.2 Morse taper (appearance may differ from the photograph but the specification is the same).

For a No.1 Morse taper rotating centre see; https://store.lathes.co.uk/parts/tailstock-rotating-centre-no-1-morse-taper

An inexpensive plastic vernier caliper that will accurately measure thread diameters.

A proper, European-made, high-quality, machine-tool class on-off and reversing switch (it can also be used as a simple on/off switch) with a maximum capacity is 5 hp. It will run either a 1-phase or 3-phase motor and is fitted in a neat box-type 64mm x 64mm x 57mm deep plastic enclosure easily attached to a suitable bracket or flat surface. Inside the housing the switch unit itself is cylindrical, very compact, and can be removed for insertion in another holder should this be necessary.

Strips of the correct density felt (made in Germany) that can be cut and packed into the holders: each strip is 150 mm long, 10 mm wide and 8.5 mm deep which is usually enough to make a set of bed-wiper for a lathe or other machine tool. The felt often be cut down to act as a wick of the type used to lubricate some types of plain bearings.

Fobco "Star" and "Universal" Drill Drive Belt: this is a European-made, high-quality, machine-tool grade belt with an invisible joint that, unlike cheap imports, does not bump as it goes around the pulleys and ensures the smoothest possible drive. The belt fits all models of Fobco "Star" and "Universal" drills.  Details and specifications of all Fobco drills can be found here

Fobco 7/8 and 10/8 Drills Drive Belt: This is a European-made, high-quality, machine-tool grade belt with an invisible joint that, unlike cheap imports, does not bump as it goes around the pulleys and ensures the smoothest possible drive. Details of Fobco drills can be found here    For the Fobco Star drill belt, click here.

Sold by various importers including Axminster, Chester, Warco, etc. The "920", "CT-918" lathe and other Model Numbers - a Chinese-made lathe that was, in effect, a developed copy of the Emco Compact 8.. This is a narrow, 5 mm wide V-belt - and is normally tensioned by a lever on the headstock. This belt is a top-quality, USA-made product.

Emco V10 & V10P output gear for the changewheel drive. 45 teeth, 2-pin steel hub. Original Part Number: C3Z-011-060. The gear supplied can be in white or black material.

Adjustable boring bar to suit a small lathe

Changewheels for Hobbymat MD65, Prazimat MD300, Saupe & Sohn, Hobby 120 Sliven and Proxxon version of the lathe: Individual gears are available in various sizes.
PLEASE NOTE: we do not have any 30t gears - if you order a 30t you will RECIEVE a 33t gear

Main drive belt for the Emco V10P.
Belts for the Emco V7, V8 , 8.4, 8.6 and V8 lathes can be ordered HERE and belts for the Emco V10 lathe HERE

Raglan "5-inch" Tumble-reverse gear. This gear has 26 teeth in cast iron UK made by a precision engineer. If in doubt about which Raglan lathe you have, check our article here: http://www.lathes.co.uk/raglan  Tumble reverse gears for the earlier Raglan "Little John" are here: https://store.lathes.co.uk/parts/raglan-little-john-tumble-reverse-gear

No.3 Morse taper rotating centre: A heavy, large-bodied unit idea for use on Colchester Bantam, Student, Master, Triumph and similar 5.5 inch to 8-inch lathes such as the Harrison L5, L5A, 11-inch, 140, Kerry, etc

For a No.1 Morse taper rotating centre see: https://store.lathes.co.uk/parts/tailstock-rotating-centre-no-1-morse-taper

No.1 Morse taper tailstock rotating centre - suitable for wood or metal lathes.

For a No.2 Morse taper rotating centre see: https://store.lathes.co.uk/parts/tailstock-rotating-centre-no-2-morse-t…

For a No.3 Morse taper rotating centre see: https://store.lathes.co.uk/parts/no-3-morse-taper-rotating-centre

A ring to repair a broken "bull wheel" on the main spindle of all Boxford belt-drive lathes except the Model VSL

Mushroom connectors for hollow round plastic drive belts. Click the down arrow in the size box to choose the correct one for your belt: The size of the connector refers to the diameter of the belt material - not the size of the hole in the belt.  Connectors for belts of the following diameters are available: 5mm, 6mm, 8mm, 10mm and 12mm are available.

As the lengths of the round drive belts on this appear to have varied we supply 1.2 metres of 5 mm diameter Polycord for you to make up your own. The belts are joined by melting the ends together - simple step-my-step instructions are included.

Boxford lathe Tumble Reverse Gears 14.5 pressure angle - Early Models
This gear is for all Models prior to Serial Serial No. 11-13513 - the introduction of the Mk.2 Models that have a single lever on top of the headstock to engage the backgears. 32 teeth and a 14.5-degree pressure angle. Made in the correct grade of cast iron - we have sold these gears for over 30 years.
For later models (the Mk. 2 AUD, BUD and CUD) with a 20-degree pressure angle see here.

Motor to countershaft and countershaft to headstock belts of the NuT-Link Type in a Z-Section.  Link belts help to reduce the vibration normally passed from a single-phase motor to the lathe - and was a fitting often used by Myford Service engineers to "quieten" a noisy machine. On the Super 7 and ML7R, the T-link belt is highly effective on the drive from motor to countershaft.