CHURCHILL-REDMAN N.M. Lathes: 7", 9", 11", 13", & 15" Models detailed Sales & Technical Specification Catalogue.
This page displays all the content on the website associated with the '7' model. Numeric models include all prefixes, such as 'Number', 'Mark', 'Size' etc.
Manuals for Model: 7
Bardons and Oliver No. 3, 5 and 7 Universal Turret Lathe: Manual, Operator's Instruction and Maintenance.
Blohm Surface Grinder "Simplex" Models 5, 7, 9, 11 & 75. Operating Manual and Maintenance Manual with Hydraulic Plan.
BSA No. 7 Centerless Grinder. Operator's Manual with wiring diagram.
Cincinnati No. 0 to 8 Plain Automatic Milling Machines: Service Manual and Illustrated Parts Manual with photographs and extensive Sectional Drawings.
Cincinnati No. 0 To 8 Plain Automatic Milling Machine. Operator's Instruction Book.
Churchill H250 and PH250 Gear Hobbing Machines. Operator's Handbook with Parts as Sectional Drawings.
David Brown No.7 Hydrax Gear Hobber. Operating Manual.
David Brown No.7 High Production Gear Hobbing Machine. Operating Manual.
Emco Emcomat/Maximat 7 and 7L Lathe. Detailed Operator's Instruction Manual with Electrical Diagrams. Includes a copy of the maker's Sales and Specification catalogue detailing the specification and showing all the accessories
Emco Emcomat/Maximat 7 and 7L Lathe: Parts Manuals as useful Exploded-component Diagrams.
Fellows 7 and 7A Gear Shapers including 7, 71, 72, 75, 77, 712, 715, 725, 775, 7125, 7A, 71A, 75A, 77A, 715A, 725A, 775A, 7125A: Detailed Operator's Instruction Manual.
Fellows 7 and 7A Gear Shapers: Parts Manual as detailed Sectional Drawings.
Fellows 7 and 7A Gear Shapers: Parts Manual as Photographed Components.
GEC Gemini 2, 4, 7 and 11 Thyristor Controlled Adjustable-speed drives. Operator's Instruction and Technical Manual with Electrical Schematics.
Fischer +GF+ KDM 7/50 Copying Lathe. Detailed Instruction Manual and Service Manual.
Gleason NC/50 Ratio of Roll and Compound Change Gear Tables and Tables of Ratios and their Reciprocals for the following machines: Straight Bevel Coniflex Generator Nos: 104, 114, 134 and 105. Hypoid Generator Nos: 7, 7A 106, 108, 116, 118, 121. The No. 7 Hypoid Grinder, No. 106 Hypoid Rougher and No. 116 Hypoid Rougher.
Herbert 7 Combination Turret Lathe with dial-change headstock. Parts Manual as Exploded Component Drawings.
Herbert 7 Preoptive Combination Turret Lathe. Installation, Lubrication, Operator's Instruction and Maintenance Manual.
Hydrovane Rotary Compressor 7 Series 37-47. Operator's Instruction, Maintenance and Parts Manual as Exploded-component Pictures.
Qualters and Smith QSB-7 and QSB-7A Bandsaws. Instruction and Service Manual with Spare Parts Manual as Sectional Drawings and Electrical Schematic.
Rusch Band Saws HBS-7 and HBS-250 Operating Instructions with Parts as Sectional Drawings. Includes a manual for the Stober Variable-speed Drive Motor-gearbox Unit and some extra sheets showing an alternative Pressure Regulator System and a different Switch Cover.
Shopsmith Mk. 7 Universal Woodworker (sometimes badged "Fusso"). Operator's Instruction Manual with Parts as Exploded Component Drawings
Ward Capstan and Turret Lathes. Ward's system for Manuals included the publication of this very comprehensive but non-machine-specific 78-page "Operator's Instruction Manual, Instruction Manual and Catalogue" and to back this up with smaller publications to explain the operating peculiarities of individual models (listed below).
Ward No.7 Capstan & Turret Lathe. 3 Operation Manuals in one covering:
- the Standard Machine (with 4 individual gear levers on the top of headstock)
- the Combination Turret Lathe (with feed shaft and leadscrew rotations controlled by two levers mounted on separate discs to the left of the screwcutting and feeds' gearbox)
- the Prelector Turret Lathe - a development of the standard machine with a "Prelector" control dial on the face of the headstock that allows the pre-selection of any speed before its engagement.
Ward No. 7 Capstan & Turret Lathe.
Ward No. 7 Spare Parts Manual as detailed Cross Sectional Drawings. Large format.
Wade Precision Lathes Nos. 3, 5 & 7: Sales, Accessories & Technical Specification Catalogue 1943 (covers 1930s and 1950s types).
Ward Turret & Capstan Lathes Full-range Sales & Technical Specification Catalogue circa late 1940s to the 1950s. Shows Models: OE, 1A, 2A, 3A, 7, 7 Combination, 8 Combination,
10 Combination, 13 Combination, 16 Combination, "Hexagon Turret for Bar Work" and Special Tool Layouts, English, German, French & Spanish Text. 28 pages.
Emcomat 7 and 7L lathes: Drive belt toothed 190 XL-75 for the early machines - the belt is 3/4" (20 mm wide) PLEASE NOTE: check the width...