Marlow Vertical Millers: No manual was produced for these millers but the following Sales and Specification Catalogues are available: Models Standard 1, 2 and 3, 3A, 4-DF and 5-DF, TM-10, TM-10A. 7 pages.

VOUMARD Type 3 (3ACH,3APCH, 3-32 and 3A, etc.) Internal Grinding
Machines:Highly Detailed Operator's Instruction and Maintenance Manual with Sectional Drawings and large Hydraulic and Electrical Schematics.

Warner and Swasey 3A Turret Lathe Model M-3500: Installation, Alignment, Adjustment, Operation and Spares as Detailed Exploded Component Drawings.

Ward Capstan and Turret Lathes. Ward's system for Manuals included the publication of this very comprehensive but non-machine-specific 78-page "Operator's Instruction Manual, Instruction Manual and Catalogue" and to back this up with smaller publications to explain the operating peculiarities of individual models (listed below).

Ward No. 3A Capstan Lathe: Detailed Operating Manual and a Technical Advertising Catalogue.

Ward No. 3A Capstan Lathe with chasing saddle - Technical Sales and Specification Catalogue to accompany MW50M.

Warner and Swasey No. 1A, 2A, 3A and 4A Turret Lathes Service Manual with Installation and Maintenance Instructions.

Ward Turret & Capstan Lathes Full-range Sales & Technical Specification Catalogue circa late 1940s to the 1950s. Shows Models: OE, 1A, 2A, 3A, 7, 7 Combination, 8 Combination,
10 Combination, 13 Combination, 16 Combination, "Hexagon Turret for Bar Work" and Special Tool Layouts, English, German, French & Spanish Text. 28 pages.
<br>

Ward Turret & Capstan Lathes Full-range Sales & Technical Specification Catalogue circa late 1950s onwards. Shows Models: 2A, 2DS, 3A, 3DS, 7DS, 7 Combination, 7 Prelector, 8 Combination,
10 Combination, 10/13 Combination, 16 Combination, Hydraulic Copying Attachment and Special Tool Layouts, English, German, French & Spanish Text. 40 pages.

Three MATHEYS "Semi-Jig Boring Machines" Catalogues. All are highly detailed with many illustrations, annotated control diagrams, some sectional drawings, Accessory Listings and price lists.

Brown & Sharpe Milling Machine Catalog dated 1928 giving technical specifications, annoted pictures showing the operation of the various controls and interesting constructional details of the ""Standard" range for the Models 2A, 3A, 2B, 3B.  36 pages.

Progress Drills - all smaller types. A set of detailed catalogues for the No. 16, No. 16S, Junior 3/8", Junior 1/2", Junior 1/2" Pillar, No. 0 (1/4" capacity), No.1 and No. 1S early, No.1 and No. 1S late, 2G, 2GS and 3A. 26 pages.

Alexander (George Alexander GHA) Pantograph Engraving and Die-Sinking Machines Nos. "1", "1A", "1B", "1-2", "2", "2A", "2B" and "3A" and 3 Series. These engravers were copies of contemporary Deckel machines - all based on the Deckel G1L.

VOUMARD Type 3A Machine-specific Internal Grinder: Detailed Operator's Instruction and Maintenance Manual with Sectional Drawings and large Hydraulic and Electrical Schematics.

Mitts and Merrill Keyseater Sizes 3A. Instructions for Operator's Instruction and Maintenance Manual including some Sectional Drawings.

Mitts and Merrill Keyseater Sizes 2, 3, 3A, 5 and 6. Instructions for Operator's Instruction and Maintenance Manual. Includes 11 large blueprints not in the original publication.

Drummond Maxicut 3A Gear Shaper: Operator's Instruction Manual (sometimes badged "Hoblique" and "Staveley") with a Sales & Technical Specification sheet.

Diaform Servicing and Adjustment Manual for Vertical Types A, B, AT, BT, 2A, 2B, 3A, 3B, 4A, R
and 4B. Includes several useful sectional drawings.

Elliott High Speed Pillar Drilling Machines 3A - 1¼" Capacity. Sales sheet including photographs, general diagram and specifications.

Alexander - Deckel  (George Alexander GHA) Universal Die-Sinking and Engraving Machines Parts Manual as detailed Sectional Drawings for Models: 1A, 1B, 1BS, 2, 2A, 3A, 3AS and No. 1 "Standard" and No. 2 "Deep-throat" (based on the Deckel G1L). The sectional drawings for the various spindles have been enlarged to full-page size.

George Alexander GHA Universal Die-Sinking and Engraving Machines. Not a manual but a detailed "Technical" Sales and Specification and Specification Catalogue that contains useful operating data, charts and details of the complete accessory range and how to mount it - includes two additional separate Sales and Specification and Specification sheets.

Brown and Sharpe Comprehensive Parts Publication for the 2A, 2B, 3A, 3B machines

Brown and Sharpe Nos. 2, 3, 2A, 3A Vertical Millers Universal and Plain Models. Repair Parts Manual. Individually Illustrated and Numbered Spares.

DIAFORM Wheel Forming Attachment . A Data pack with a copy of the Diaform Booklet "Form Dressing with the Diaform Wheel Forming Attachment" - a detailed guide as to what the machine can achieve with illustrated examples of work and issued with the the early Diaform Models A, B, AT, BT, 2A, 2B, 3A, 3B, 4A, R and 4B.