Logan "Powermatic" lathes. late Catalogue showing the final production machines in screwcutting and turret types. A detailed and well-illustrated catalogue. 34 pages
Model: 11-inch
This page displays all the content on the website associated with the '11-inch' model. Numeric models include all prefixes, such as 'Number', 'Mark', 'Size' etc.
Manuals for Model: 11-inch
Print code: L390D
Print code: MB176A
Bickford-Cincinnati Radial-Arm Drills with 11, 13, 15, 17 or 19-inch diameter columns. Operator's Instruction and Maintenance Manual with Parts as Photographic Plates.
Print code: MD311
Delta Rockwell 11-inch Lathe (Rockwell) Instruction Book, Maintenance Manual and Exploded Parts Diagrams. Includes copies of the Maker's Sales, Specification and Accessories Catalog and the Screwcutting & Feeds Chart.
Print code: MS526A
Unfortunately a proper handbook was never produced for early flat-belt drive Sheldon lathes with 9-inch, 10-inch and 11-inch swings - but we can offer a complete Data Pack that gives all the information known about this model (Pictures of this type here: http://www.lathes.co.uk/sheldon/page5.html) It consists of: - "Care & Operation of a Lathe" by Sheldon - the large and well-illustrated Sheldon Sales, Accessories and Technical Specification Catalogue of the late 1930s and 1940s - a copy of the handbook for the la
Print code: MS526C
SHELDON Newer Series S and M 11-inch and 13-inch Lathes. Basic "Setting-up" Instructions, Spindle Dismantling, Metric Screwcutting Instructions, Parts as Exploded Component Drawings and a detailed, full-range Sheldon Sales, Specification and Accessories catalogue.
Print code: MS526F
Sheldon S-56 (underdrive) and KS (overhead drive) Older 11" Lathe Illustrated Parts Manual.
Print code: MS805C
South Bend Model Parts Manual for the Models "O", "N", "R" and Junior Lathes in the following sizes: 9", 11", 13", 15", 16" and 18"
Print code: MS876-10-11
STANDARD MODERN 10-inch Lathe. We don't have the specific manual but the "10-inch" is very similar to the Series 2000 11" model (the 10" measurement is conservative) with the main difference appearing to be that the headstock and tailstock are rounded rather than angular in appearance - and generally less "modern" looking. The Model 2000 was also made with two centre heights: 11 inches and 13 inches. The manual I have is marked for the 11-inch - but it has also been found to cover the 10-inch and 13-inch models.
Print code: MS876A
Standard Modern Lathe 11-inch Model 2000. Operator's Instruction Manual and Spare Parts Illustrations.
Print code: P-146
Elliott 9¼" and 11" Lathes Catalog - 18½" and 22" swing models (48", 80" and 100" between centres). Very detailed descriptions with photographs and various technical data.
