For Sale: Harrison M250 Lathe 5.7" x 30" (long bed). Mounted on the maker's stand with a full-length splashback, hardened bed, infinitely variable-speed drive from a 1-phase to 3-phase converter, a 2-axis DRO and dual inch/metric feed dials.

Myford Super 7BPXF Long Bed Lathe - Serial No. SKL 126833 3.5" x 30" fitted with an Imperial screw-cutting gearbox with transposing changewheels for metric and BA pitches and power cross feed. Mounted on the maker's industrial cabinet stand, chip tray, raiser blocks and 1-phase electrics. In excellent condition with unworn bedways and in the maker's paint finish.

For Sale: Nicely Presented Mid Year Myford Super7 Lathe - 3 1/2" Centre height backgeared gap bed screwcutting centre lathe. £1330 (accessories also available). Sussex UK - RH16 Postcode *** Text "Super7" to 07946 353358 for prompt callback (call screening) ***

Twin Milling machine - price reduced to a bargain £950 as time is not on my side. One owner from new and preserved in original condition and full working order with a single-phase motor and a " STARTET" push-on-push-off starter. Mounted on a fabricated stand, the miller uses a conventional cast-iron column with ways for the knee formed on its front surface. The knee is elevated by a front-mounted screw - in the manner of a Centec 2B - and carries a 20" x 6" table with two T-slots.

Emco Unimat SL1000 lathe complete with the rare and very useful power-feed attachment. 3-jaw chuck, the correct machine vice, vertical milling column and bracket, T-slotted milling table with T-bolts and clamps, faceplate, 4-way toolpost, drive dog, tailstock drill chuck, live and dead centres, tool holders, and a grinding wheel. Retro-fitted with a 24-volt variable-speed DC motor and speed controller for enhanced reliability. Needs new belts. Full details of these very handy and effective lathes here

Cowells Miniature Precision Vertical Miller. Fitted with the maker's original variable-speed drive system, a high-quality, English-made Parvalux 1/6 h.p., continuously-rated DC motor that can be varied from 40 to 4000 r.p.m. with positive drive by a toothed belt. Both the knee and 8" x 2" table are in cast iron while the hardened and ground spindle runs in a pair of high-precision, 48 mm diameter, angular contact bearings - these having their pre-load able to be set by a fine-threaded adjuster nut.

Hardinge HLV-H High-precision Toolroom Lathe 5.5" x 18" backgeared and with variable speed drive from 125 to 3000 r.p.m. The power sliding and surfacing feeds are driven independently by an electric motor, this system allowing for any combination of rotational and cutting feed rates to be set. The lathe has been standing, unused, for 6 years in a dry workshop and so needs a good clean before being returned to use. A data pack with Operation, Maintenance and Parts Manuals is also included.

Dore Westbury Mk.2 "ram-head" Vertical Miller. A most versatile machine with a head that can be elevated, swung, tilted and moved in and out. Table 16.5”x 5.5”. Fitted with a No.2 Morse taper socket and a standard Myford thread nose (allowing chucks, etc., to be fitted), the spindle has both worm-and-wheel gearing for fine feeds and a rapid-action drilling quill.

Myford ML7 Lathe 3.5" x 20" gap-bed, backgeared and screwcutting. This is a late-model example and is still in its maker's paint finish.

Smart and Brown Mk.1 Model M backgeared, screwcutting precision toolroom lathe 4" x 18" with power cross feed and coolant - probably manufactured between 1946-47. The lathe is used frequently and is almost completely original even to the factory-fitted single-phase drive motor and switchgear (the leather drive belt if not the first fitted, is ancient). I've replaced the coolant pump with an alternative as the original was unserviceable. A note of caution: the lathe does not have any modern safety stops or cut-outs.

Harrison 11-inch lathe. 5.5" x 30" with a detachable gap-bed, geared headstock and clutch/brake control of the spindle. Mounted on the maker's cabinet stand with a full-length splashback. Equipped with a full screwcutting and feeds gearbox, coolant, 3-jaw chuck, 4-way toolpost, chuck guard and thread-dial indicator this lathe appears to be in its maker's original paint finish and so only lightly used. Full details of Harrison 11-inch lathes here

Bench-mounted hand-operated planing machine. A most useful device that produces, at very low tooling costs, flat surfaces around 7 inches long and 6 inches wide. A bench-mounting metal planing machine - make unknown. I have had this for a few years and refurbished it some time ago but have not used it since so time to pass it on. There is no maker's name visible but it is substantially built and when I last used it, it performed very well.

Myford 254S lathe 4.75" x 21" fitted with a full screwcutting gearbox with an enclosed leadscrew and a separate power-shaft drive to the sliding and power cross feeds, a hardened bed, extra large micrometer dials, a 26 mm spindle bore and single-phase electrics. Very well equipped with 3-jaw chuck  4-jaw chuck, fixed steady, travelling steady, an Emco milling slide, quick-set toolpost, 4-way toolpost, and all the original tooling and accessories used by the last owner as shown in the photographs.