Drummond Maxicut No. 1 Automatic Multi-tool Lathe: Operator's Instruction Manual.

Ajax No. 1 Universal Milling Machine: Installation, Operator's Instruction and Maintenance Manual with Parts Manual as sectional drawings and an electrical schematic.

Alexander (George Alexander GHA) Pantograph Engraving and Die-Sinking Machines Nos. "1", "1A", "1B", "1-2", "2", "2A", "2B" and "3A" and 3 Series.

AVO Test Set No.1 Mk. 3 Universal AvoMeter. Operating Instructions.

Blanchard No.1 Surface Grinder. Operator's Instruction Manual and Parts Manual as Sectional Drawings.

Bridgeport Series 1 Turret Miller. 24-page Catalog showing all the heads and other accessories. A useful adjunct to the Bridgeport Series 1 publications.

Bridgeport Series 1 MDI Milling Machine: Maintenance Manual.

BRIDGEPORT INTERACT SERIES 1. Maintenance Manual with electrical schematic and including a 66-page set of notes written by a Service engineer titled: "Bridgeport Electrical Test and Setup Procedures"

BRIDGEPORT INTERACT SERIES 1. Operating and Programming Manual with Heidenhain TNC145 or TNC 150 Series Controls.

Bridgeport Interact Series 1 Mk. 2 and Interact Series 2 Mk.4. Operating and Programming Manual.

Bridgeport Interact Series 1 Mk. 2 Maintenance Manual with Parts Manual as Detailed Sectional Drawings for machines with Heidenhain TNC2500 Control with additional Parameter Sheets. Some electrical schematics are included, sourced from the factory before it closed; however, these are poor-quality reproductions.

Brookman Automatic Dovetailer Type AD Mk. 1, Mk. 2 and Mk. 3. Operation Instructions.

Brown and Sharpe No. 1, 2, 3 and 4 Universal Grinding machines: Comprehensive and detailed Operator's Instruction and Maintenance Manual Including Repair Parts as photographic illustrations.

BSA No. 4 and 4G Centerless Grinder (also sold as the Churchill No. 1) Detailed Operator's Manual with numerous sectional drawings and an electrical schematic.

Burdett 70, 75 and 77 "Rapidgrind" Surface Grinders Mk.1 (identifiable by flat side faces to the grinding wheel cover, sloping sides to the stand, a small trapezoidal-shaped door beneath the central control wheel and the three main control wheels in a diagonal line across the face of the machine).

Cardiff No. 1 Power Punching and Shearing Machine. Operator's Instruction Book with Blade Adjustment Instructions and an Illustrated Parts Manual.

Churchill No. 1 Centreless Grinder (also sold as the BSA No. 4G) Detailed Operator's Manual with numerous sectional drawings and an electrical schematic.

Cincinnati Earlier "Dial Type" Milling Machines Nos. 1, 2, 3 and 4: Detailed Operator's Instruction Manual. As made from the 1930s until the mid-1940s. Identifiable by two small dials on the left-hand column face of the machine.

Cincinnati No. 0 to 8 Plain Automatic Milling Machines: Service Manual and Illustrated Parts Manual with photographs and extensive Sectional Drawings.

Cincinnati No. 0 To 8 Plain Automatic Milling Machine. Operator's Instruction Book.

Clarkson Tool And Cutter Grinder. Mk 1 and Mk. 2 (also badged as Smart & Brown, March, Virginia Beavermill and DeVlieg). Illustrated Operator's Manual. Included is a separate early edition that shows, in greater detail, how to set up many common tool-grinding jobs. This manual can be used to help with other makes of cutter grinder for which Instructions are not available.

Clarkson Tool and Cutter Grinder "Tool and Cutter Care" An Accessory Catalogue for Mk. 1, 2 and Mk. 3 machines. Useful in showing the range and mounting of the various Accessories.

CVA Precision lathe Models1 and 1A as seen here in their various forms: http://www.lathes.co.uk/cva Operating and Maintenance Instructions (sometimes found branded CVA, Coles, Kearney & Trecker and Lodge & Shipley). Every known piece of operation, maintenance and sales literature about these fine lathes is inclu

Colchester Student, Master and Dominion Lathes Mk 1 and "Mk. 1½" (and other versions, by Clausing the 13 x 24 and 13 x 36 etc). Round-headstock model but with either a "sliding-lever" on the apron that lifts into either one of two slots to engage the power feeds - or with a single, centrally-mounted round control lever. The differences between Mk.