Werner (Fritz Werner) 3.230 Vertical Milling Machine. Simple Operating Manual with electrical schematics and sectional drawings (27 pages) together with a machine-specific and the (contemporary) comprehensive and beautifully illustrated full-range 93-page Fritz Werner milling machines Sales, Technical Specification and Accessories Catalogue.

Werner (Fritz Werner) 3.275 Spine Shaft Grinder. Operating Manual with Wiring Diagram.

Westinghouse chargers for Electric Vehicles and Trucks Type SV Sizes 2, 3 and 4. Instruction Book.

Ward Capstan and Turret Lathes. Ward's system for Manuals included the publication of this very comprehensive but non-machine-specific 78-page "Operator's Instruction Manual, Instruction Manual and Catalogue" and to back this up with smaller publications to explain the operating peculiarities of individual models (listed below).

Ward No. 2 and No. 3 "Auto-Ward" Plug Programmed Capstan Lathes. Installation, Operating and Maintenance Manual including fault Diagnosis. Late Edition, fully revised.

Ward No. 3 "Auto-Ward" Plug Programmed Capstan Lathe: "Setting Instructions". - this should really be called an "Instruction Book" and show the basic operating procedures specifically for the No. 3 lathe -the air-operated bar feed and automatic chucks, etc.

Ward No. 3 Plug Programmed Lathe: Spares as Detailed Sectional Drawings.

Ward No. 3 Automatic Lathe: "Setting Manual". this should really be called an "Instruction Book" and shows the basic operating procedures for using the lathe, the air-operated bar feed and automatic chucks, etc.

Wickman Scrivener Grinding Machines Catalogue dated 1965. Gives details and technical specifications of:
Centreless Grinders Nos. 0, 0-Cadet, 1, 2G, 2H, 3, 24/30 Duplex, 18/20 Duplex, 36 D.P.G. Duplex Peripheral,

Thiel Filing & Sawing Machines. A publication by the importers E.H.Jones titled: "1862 - 1928 The Home of Thiel Precision Filing and Sawing Machines". General catalogue and accessories showing both the German and English-made versions. Sizes 1, 2, 3, 4 and 5 and Models 13 and 17.

Myford Mini-Kop Mk. 3 and 3A  - identified by its flat-fronted cabinet with a control box on the right-hand side:  Detailed Instruction Manual, Workshop Manual and Parts Manual as Exploded Component Drawings. Read all about Min-Kop lathes here http://www.lathes.co.uk/myfordminikop/

Churchill Redman "CUB" Lathe Mk.3. Maker's Instruction and Maintenance Manual and Spares Lists in the form of detailed Sectional Drawings of the entire machine. Includes a copy of the maker's 12-page Technical Sales and Specification Catalogue.

Cincinnati "Dial Type" Milling Machines For machines staring with Serial number 4A. Nos. 2, 3, 4, 5 and 6 Models LL and also as Types: 315-15, 415-15, 420-16 and 520-16 (Model LL) and 520-20, 540-20, 620-20, 640-20 (Model ELA): Comprehensive Service and Dismantling Manual and Parts Manual as Exploded Component Diagrams.

Cincinnati Last Model of "Dial Type" Milling Machines Nos. 2, 3, 4, 5 and 6 and also as Types: 315-15, 415-15, 420-16 and 520-16 (Model LL) and 520-20, 540-20, 620-20, 640-20 (Model ELA). These models had a speed dial on the column and a feed dial on the side of the knee. Operator's Instruction Book.

Matrix (Coventry Gauge and Tool Company) No. 37 and No. 47 Type 3 Taper Thread Grinding Machines. Operator's Instruction and Maintenance Manual with Dismantling Instructions.

Kearns No. 2 and No. 3 Horizontal Boring and Facing Machines. Operator's Instruction, Installation and Lubrication Manual. Includes a copy of the comprehensive and useful technical Sales and Specification catalogue.

HEY No. 3 Automatic Facing & Centering Machine: Equipment for Short Work - Supplementary publication.

Hey No. 3 Automatic Facing and Centering Machine: Detailed Manual of Standard Tooling to Inch Standard with clear illustrations.

Richmond No. 3 Milling Machine - all models, both Vertical and Horizontal. Instruction Book and Spare Parts Manual as Exploded Assembly Diagrams. Includes Sales and Specification and Accessories Catalogues for all versions.

Downham Mini Jig Borer (also badged Elliott, Gate and Excel) A complete data pack for the machine containing all known literature with the Operating and Maintenance Manual and Parts as Exploded Component Drawings.. Covers the Mk. 1, 2 and 3 models and the Electrical Manual for the variable-speed Mk. 3.

Coronet and Record Woodturning lathes Data Pack. These twin-bar bed lathes were produced in a variety of Models, all very similar and given a range of marketing names. This pack covers all types marketed as, originally, the Coronet No.0, No. 1, No.2 and No.

Boley Lathes: 1A, 1B, 2BE, 1BH, 1HM, 1HME, 2HME, Sizes 1, 2, 3, 4, the high-precision F1 and the late Model 4L. A Catalogue of Boley lathes made from the 1950s to the 1960s. Includes Watchmakers', Precision Plain-turning and Production, Bench, and Backgeared and Screwcutting types. 38 pages.