Thiel Vertical Tapping Machines sizes 2, 3 and 4. Operator's instructions.

Taylor No. 3 Cutting-Off Machine, flat-belt-drive. Spare Parts catalogue.

Ferranti Co-ordinate Inspection Machines Sizes 2, 3, 4 and 5. User's Handbook. Includes "Interconnection Wiring Diagrams".

Veem Mk. 3 lathe - also badged as the Premo (Australia). Instruction Manual. Very little was published on this lathe and the maker's only paperwork was a slender, but still useful user's guide. Includes a copy of the maker's catalogue and, if you are restoring one of these lathes, a set of photographs of an original, restored machine is including.

Vertimax No. 3 Chucking Lathe: (sometimes badged Churchill-Vertimax) Operator's Manual.

Vertimax No. 3 Chucking Lathe: Maintenance Manual.

VOUMARD Type 3 (3ACH,3APCH, 3-32 and 3A, etc.) Internal Grinding
Machines:Highly Detailed Operator's Instruction and Maintenance Manual with Sectional Drawings and large Hydraulic and Electrical Schematics.

Stat Systems (Herbert). Chart showing setting instructions for Herbert and Ward capstan lathes in sizes 2, 3 and 4 sizes.

WMW SASL 125 Centreless Grinder (also covers the SASL 3, SASL 4 and SASL 5). Detailed Instruction and Maintenance Manual with Electrical Schematics.

Wolf-Duplex Toolpost Grinder GL3. Operation Instructions and three detailed technical-specification catalogues. includes Duplex Models D22A, D22A/3, D27A, D27A/3, D28, D29. D30, D30A, D31, D31A, D31B, D34, D35, D70, D71, D72, D73 and Collace M34, M36.

Wyvern Wyvomatic Mk.3 Duplex Turning, Facing and Boring Machine: Detailed Maintenance Manual.

Siemens Sinumerik System 3 Operating Instructions Parts 2 and 3.

Siemens Sinumerik System 3. Comprehensive Training Folder with Serial Interface for Data In and Data Out and Operating Instructions Part 3 Version 4 and Interface Instructions part 2E8.87.

Warner and Swasey No. 3, 4 and 5 "Universal Ram Type" Turret Lathe: Service Manual and Fold-out Sectional Drawings Parts Manual with detailed Assembly Diagrams.

Werner (Fritz Werner) 3.230 Vertical Milling Machine. Simple Operating Manual with electrical schematics and sectional drawings (27 pages) together with a machine-specific and the (contemporary) comprehensive and beautifully illustrated full-range 93-page Fritz Werner milling machines Sales, Technical Specification and Accessories Catalogue.

Werner (Fritz Werner) 3.275 Spine Shaft Grinder. Operating Manual with Wiring Diagram.

Westinghouse chargers for Electric Vehicles and Trucks Type SV Sizes 2, 3 and 4. Instruction Book.

Ward Capstan and Turret Lathes. Ward's system for Manuals included the publication of this very comprehensive but non-machine-specific 78-page "Operator's Instruction Manual, Instruction Manual and Catalogue" and to back this up with smaller publications to explain the operating peculiarities of individual models (listed below).

Ward No. 2 and No. 3 "Auto-Ward" Plug Programmed Capstan Lathes. Installation, Operating and Maintenance Manual including fault Diagnosis. Late Edition, fully revised.

Ward No. 3 "Auto-Ward" Plug Programmed Capstan Lathe: "Setting Instructions". - this should really be called an "Instruction Book" and show the basic operating procedures specifically for the No. 3 lathe -the air-operated bar feed and automatic chucks, etc.

Ward No. 3 Plug Programmed Lathe: Spares as Detailed Sectional Drawings.

Ward No. 3 Automatic Lathe: "Setting Manual". this should really be called an "Instruction Book" and shows the basic operating procedures for using the lathe, the air-operated bar feed and automatic chucks, etc.

Wickman Scrivener Grinding Machines Catalogue dated 1965. Gives details and technical specifications of:
Centreless Grinders Nos. 0, 0-Cadet, 1, 2G, 2H, 3, 24/30 Duplex, 18/20 Duplex, 36 D.P.G. Duplex Peripheral,

Thiel Filing & Sawing Machines. A publication by the importers E.H.Jones titled: "1862 - 1928 The Home of Thiel Precision Filing and Sawing Machines". General catalogue and accessories showing both the German and English-made versions. Sizes 1, 2, 3, 4 and 5 and Models 13 and 17.