Model: D

This page displays all the content on the website associated with the 'D' model. Numeric models include all prefixes, such as 'Number', 'Mark', 'Size' etc.

Manuals for Model: D

Print code: 13141

Operator's handbook for the Taylor Hobson Model D Pantograph engraver.

Print code: H678-HOFF

H678-HOFF  HOFFMAN Dividing Heads Sales & Specification Catalogue showing the DTH, HTH,
HTH(A), UTH, HG, HTG, TSH-100, D, MT-125/3, Z, ZT, VTS, VTS+BV, VTSA-200, HMTH,
UMTH, UMTHS, MTS, ABS, ABL, EMT-100/1, EMT-150/2, EMT-160/1, EMT-180/3,
ETW/125-5, ETW/125-2, ETW, SETW/125, DT, DT(A), HTHD, ANC-240, NCT, HTH/NC,
STH-Round, STH-Square, RH-10, RHI, RDI, WR, HPR/M, HPRS/M, RMDSUP, EMS,
HDR (A,B,C), HDRM, WHDR, HPRD(A), HPRD(B), HPRSD(A), HPRSD(B), HPRSD(C),
HPRSD(D), HPRSD(D), RNC, WRNC, HPR(NC), WHPR/NC,HPRS/NC and WRMH.  20 pages

Print code: H680J

Holbrook Model D Lathes. Well illustrated and detailed Sales & Technical Specification & Accessories Catalogue.

Print code: J70R2

JONES and SHIPMAN Full-range, well-illustrated Grinder Catalogue from the
1940s to 1950s. Covers the following models: AW, BW, CW, OH, PAW, HBY, HCY,
HDY, HBA, HBB, AC, UAC, NB, OSB, OSG, OSV, VXA, VL, AJB, AJW, DAJ, DAX, LQ,
LCP, DCH, DCY, CRM,C, D, F, BW, TG, VB, and VBA

Print code: MA445A

Acorntools 10-inch and 12-inch Lathes (Atlas 10-inch Clone): A complete package of information that covers all models from the first models to the last is available. It includes:

Print code: MA736

Atlas 10-inch F and D type Lathe. Separate Parts Manual as exploded component diagrams and a basic threading chart.

Print code: MA736A

Atlas Lathe "Pickomatic" Screwcutting Attalchment. 79-page Manual for the 10-inch F and D type Lathe. Complete Installation and Operator's Instruction Manual with extensive charts giving threads and feed rates for every possible combination of gears and including threads not listed on the lathe. Exploded components diagrams. Plus a copy of the Pick-O-Matic lathes Sales and Specification and Specification and Accessories catalogue

Print code: MB120L

Barber-Colman Type "D" Gear Hobbing Machine: Operating Manual.

Print code: MB560

Broadbent and Schofield (also "Oldfield" and "Schofield") Drum lathes with headstocks Type A, C and D Type. General Instruction and Operator's Instruction Manual.

Print code: MB560A

Broadbent and Schofield (also "Oldfield" and "Schofield") Drum lathes with headstocks Type A, C and D Type. 6 large engineering drawings.

Print code: MC450A

Coventry Die Heads Spare Parts Manual with Illustrations and useful Cross-Sectional diagrams of the various units including all "D" types. (Herbert)

Print code: MC570B

Cri-Dan Type D High-speed Threading Machine (also marketed by Herbert): Operator's Manual.

Print code: MC81D

Churchill D Roll Grinder: Comprehensive Maintenance and Operating Manual and Parts Manual as Sectional Diagrams and Exploded Components.

Print code: MC81D/DE

Churchill D and DE GRINDERS: Comprehensive Maintenance and Operating Manual and Parts Manual as Sectional Diagrams and Exploded Components.

Print code: MH411C6/MN625A

Herbert "D" fitted with Nickols Automatics (EMI) Controls. Detailed Operator's Instruction and Maintenance Manual for this single-spindle Auto lathe.

Print code: MH740C

Holbrook Model D Nos. 13, 15 and 18 Toolroom Lathe: Operator's Instruction Manuals. Individual publications bound as one plus the comprehensive Technical Sales and Specification and Accessories Catalogue.

Print code: MH740D

Holbrook Model D No. 18 Toolroom Lathe: Operator's Instruction Manual plus comprehensive Technical Sales and Specification and Accessories Catalogue.

Print code: MH740DR

Holbrook Model D Lathe Relieving Attachment Instructions.

Print code: MH800

Holzher Panel Saw PKS-D Instruction Manual and Parts List with some sectional drawings.

Print code: MK172K

Kearney and Trecker KT-gemini-D Control System Operating Manual (Publication 883C).

Print code: MK172L

Kearney and Trecker KT-modular-D Control Maintenance Manual (Publication 894C).

Print code: ML71B

LeBlond Regal Lathes (13" to 19") early 1940s to late 1950s. These were designated: A = 10", B = 13", C = 15", D = 17" E = 19", F = 21", H = 24", The lathes remained largely unchanged mechanically from their introduction until the late 1950s - although the stands and drive systems were modernized to make the machines more compact. A detailed and comprehensive Operation, & Maintenance Manual with a Parts Manual as clear Exploded Component Drawings.

Print code: MO225

Oldfield and Schofield (also Broadbent and Schofield) General Instruction and Operator's Instruction Manual for the Type A, C and D Type lathes. Includes an electrical diagram.

Print code: MS500C

Scrivener (Wickman-Scrivener) No. 1 Centerless Grinder Model C and D: Two editions, early and late, of the Operator's Instruction and Maintenance Manual

Print code: MT100B

Taylor Hobson Model D (stand-mounted) - this publication also covers the almost identical bench-mounted Type A. Pantograph Engraver Operator's Instruction Manual. Includes three Sales Catalogues (one for the A and two for the D) together with a 32-page Taylor Hobson Accessories Catalogue (including cutter grinders) that not only illustrate the various extras but give useful details of their functions. This machine was also badged as Newing-Hall.

Print code: MT100C

Taylor Hobson Model D Pantograph Engraver (also covers the head section of the A). Parts Manual as Sectional and Exploded-component Diagrams.

Print code: MT323EC

TRAUB STROHM Models TD: Instructions for Cycle Time and Cam Calculations. £95

Print code: MY05A

YAMAZAKI MAZAK Precision Lathe Models A, B, C and D - sometimes marked as the Model MK530 (the carriage handwheel can be found both on either the left or right-hand sides of the apron). Operating Manual with Parts as Detailed Sectional Drawings. Includes high resolution pictures of the often worn-out screwcutting and feed chart and a copy of the maker's detailed and well-illustrated Sales & Specification catalogue. Although the operating instructions are basic,but. rest of the publication superb.

Print code: N400

N400
NUTTALL 6.5-inch centre height Lathe Models C, D, E and F. (Australia). Sales & Technical Specification catalogue. 4 pages

Print code: S525

S525 STAR Watchmakers' Lathes. 7 Sales Sheets showing the boxed lathe sets B, C D, E, F, R, the base-mounted with countershaft and motor Combination Set No. 9m.C., therare maker's stand-mounted unit with drawers, countershaft and light unit and a page on the simple "turns" versions. English French and Spanish Text

Print code: S780C

STUDER "All-Models" catalogue giving the technical
specification of types: OC, OF, RHO400, RHU650, RHU1000, RHU Models C, D and E,
RHU-F/G, RHU400, 650 & 1000 CNC types, RHU/RA. RHU/EA, RA5, EA300, RM250,
PSM150, PSM250, FS71SFM500 and RLS200. 20 pages

Print code: S800

Superior Bench & Pillar Drills (1920s to 1930s) Sales & Technical Specification Catalogue for the Types: E, RE, Q, D, P and U. 4 pages.

Print code: S880F

SWIFT (CRAWFORD-SMITH) Type D Series 60 Lathes: Sales & Technical Specification Catalogue. 12 pages. 

Print code: T116

TAYLOR HOBSON Pantograph Engravers: Sales & Technical Specification Catalogues that cover the Company's Models C, CB, CX, CXL, JH, A, D, NH, K, Model K Mk.2 and the "Pantograph Milling & Diesinking Machine" 50 pages.

Print code: T116

Taylor Hobson: a collection of individual Sales and Technical Specification Catalogues that cover the entire range of post 1930 Pantograph Engravers as made until the 1970s:
Model A early; Model A late; Models C, CX and CXL; Model D early; Model D late; Model JH early; Model JH late; Model K Mk.1; Model K Mk.2 early; Model K Mk.2 late; the special Taylor Hobson inclinable dividing head and the "Pantograph Milling and Diesinking Machine"; 52 pages.

Print code: T119L

THIEL Automatic Screw Machine Type A.D.S. Sales & Technical Specification Catalogue. 4 pages £10

Print code: W44B

Webster & Bennett Vertical Turning and Boring Miller Series 1 Model D. Sales & Technical Specification Catalogue with well-illustrated constructional details, design features, full speed, feed and capacity charts, special adaptations, accessories, tooling and toolholders. 40 pages.

D Parts

Boxford lathe Tumble Reverse Gear Early Models

This gear is for all Models prior to Serial Serial No. 11-13513 - the introduction of the Mk.2 Models that have a single...