Boxford Belt-drive Lathe Manual as a comprehensive Technical Data Pack. A complete, high-quality 236-page publication for all models of belt-drive Boxford lathe from earliest to last.
This page displays all the content on the website associated with the 'C' model. Numeric models include all prefixes, such as 'Number', 'Mark', 'Size' etc.
Manuals for Model: C
BROADBENT and SCHOFIELD Lathes.
A Complete Catalogue Collection for the Types: BSB, C, BSC, BSD, BSH, BSN, BSV, BSX, L8V/L10V & "Drum Types" 77 pages.
CHALLENGER Lathe. Sales & Technical Specification Catalogue. 8 pages.
Hendey Models KK, AA, W, BB, C, 12" helical-geared head lathes. Sales and Technical Specification Catalogue
Holbrook Model C Lathes: Well illustrated and detailed Technical Catalogue showing the Models Nos. 10, 13 and 16. Covers, with a supplement, both roller bearing and plain-headstock models. Includes a comprehensive guide to screwcutting.
JONES and SHIPMAN Full-range, well-illustrated Grinder Catalogue from the
1940s to 1950s. Covers the following models: AW, BW, CW, OH, PAW, HBY, HCY,
HDY, HBA, HBB, AC, UAC, NB, OSB, OSG, OSV, VXA, VL, AJB, AJW, DAJ, DAX, LQ,
LCP, DCH, DCY, CRM,C, D, F, BW, TG, VB, and VBA
Lorch Lathe Accessories for Models A, B and C. 19 pages
Acorntools 10-inch and 12-inch Lathes (Atlas 10-inch Clone): A complete package of information that covers all models from the first models to the last is available. It includes:
Bechler Type C and CR Automatics (C-26, C-32 and C-35) Lathes: Operating Instructions, Speed tables and Installation Plans.
BRIDGEPORT Series 1 Universal Milling Machine - and it's various and many clones: A complete, high quality Data Pack consisting of all known literature in three parts:
1) Installation, Operator's Instruction, Maintenance and Parts Manual - the latter as very clear exploded component drawings in the UK Edition
2) A copy of the earlier American "Sectional Drawings" Edition covering all years including the very early "Master Milling Attachment" Model C Head in 1/4 and 1/2 hp versions.
Broadbent and Schofield (also "Oldfield" and "Schofield") Drum lathes with headstocks Type A, C and D Type. General Instruction and Operator's Instruction Manual.
Broadbent and Schofield (also "Oldfield" and "Schofield") Drum lathes with headstocks Type A, C and D Type. 6 large engineering drawings.
Cone "C" Models - all Types. Operator's Instruction Manual.
Denbigh C-Type Milling Machine. No proper manual was produced for this machine but the makers issue three drawings: a large General Arrangement with a sectional drawing through the horizontal spindle and with parts annotated on a second sheet. A Drawings showing the lubrication requirements and one with sections showing the necessity of removing the table winding handle during certain operations. The drawings plus a sales and Technical Specification catalogue.
Fanuc System 3M-Model-C. Operator's Manual.
Fanuc System 2T-Model-A and 3T-Model-C: Maintenance Manual.
Fanuc System 3T-Model-C: Maintenance Manual.
Fanuc Graphic Conversion B/C for Lathe - Series )-TF and 0-TC. Operator's Manual.
Fanuc GE Automation - Series O Model C: Product Service Guide.
GER Model C-1500 Cylindrical Grinder. Operator's Instruction and Maintenance Manual with Parts as Engineering Drawings and Electrical Schematics. English Text.
GER Model C1500 Cylindrical Grinder. Operator's Instruction and Maintenance Manual with Parts as Engineering Drawings and Electrical Schematics. This version is in Spanish - see below for English text edition
Herbert Drills Types C, V and M and "V Senior" (single and multi-set drill) Operator's Instruction Manual - Final and most-complete edition.
Herbert Drills Types Cand V Spare Parts Manual as Exploded Component Diagrams. First edition. See below for the more complete version.
Herbert Drills Types C, V and M and "V senior" Spare Parts Manual as Exploded Component Diagrams. Final, most-complete Edition.
HERBERT SENTINEL CRI-DAN Type C High-SPEED THREADING MACHINE: Operating and Setting Manual.
Holbrook Model C Lathes: Operator's Instruction Manuals plus detailed screwcutting charts and electrical diagram. Includes a comprehensive 25-page Technical Sales and Specification and Accessories Catalogue (Models 10, 13 and 16) that clearly explains the machine's functions and capabilities.
Landis 1-inch Type LC and 10" -12" -14" -16" -18" Type C Universal Grinders: Operator's Instruction Manual and Parts Manual as Sectional and Cut-away Diagrams.
Landis Type C 6", 10" & 14" Plain (cylindrical) Grinders. Operator's Instruction Manual.
LeBlond Regal Lathes (13" to 19") early-1940s to the late 1950s. These were designated: A = 10", B = 13", C = 15", D = 17" E = 19", F = 21", H = 24", The lathes remained largely unchanged mechanically from their introduction until the late 1950s - although the stands and drive systems were modernized to make the machines more compact. A detailed and comprehensive Operation, & Maintenance Manual with a Parts Manual as clear Exploded Component Drawings. 98 pages.
Monarch Model C Toolroom Lathe. Operation & Maintenance Manual with Electrical Schematic and Parts as "exploded-component" photographs. Includes a superb 33-page Sales, Technical Specification and Accessories catalog. £50
Norton Type C 14-inch, 16-inch and 18-inch Cylindrical Grinders, Heavy-duty high Swing Grinders and 42-inch x 72-inch Special Universal Jet Part Grinders. Instruction, Adjustment and Lubrication Manual and Parts Manual as sectional drawings.
Oldfield and Schofield (also Broadbent and Schofield) General Instruction and Operator's Instruction Manual for the Type A, C and D Type lathes. Includes an electrical diagram.
Pratt and Whitney Model C 12-inch Lathe. Screwcutting Engine Lathe Operator's Instruction Manual.
Pratt and Whitney 4.5" Thread Miller Model C. Operator's Instruction Book.
Pratt and Whitney 6" Thread Miller Model C. Operator's Instruction Book and Parts Manual as Sectional and Annotated Drawings.
Pratt and Whitney Model C Lathe: Relieving Attachment: Instructions and comprehensive gear charts.
RICHARDS (George Richards and also found badged Staveley) "Electrabore" Boring and Facing machine. Covers all sizes (A, B and C) and sizes e.g. some being marked: WB15, WB20, WB30, WB40, WB50, etc,
Scrivener (Wickman-Scrivener) No. 1 Centerless Grinder Model C and D: Two editions, early and late, of the Operator's Instruction and Maintenance Manual
Sheraton "9-Inch" lathe. The very best Manual is the one produced in England for the South Bend clone made by Boxford. Unlike the South Bend book "How to Run a Lathe" this 170-page edition concentrates in detail on the 9-inch lathe. I have also added all the known relevant South Bend 9-inch data to give a complete data pack for the machine: operating instructions - extra comprehensive screwcutting charts with metric conversions for both the changewheel and gearbox models and other valuable data.
Taylor Hobson Pantograph Engravers Models C, CB, CX and CXL. A complete data pack with all known literature from first to last: Operator's Instruction Manual with Parts as Sectional Drawings including Instructions for all the accessories and the "Javelin" Electric Etcher. The first "catalogue-cum-instruction book" and the maker's comprehensive and well-illustrated 38-page Sales & Specification & Accessories Catalogue.
TAYLOR HOBSON Pantograph Engravers Models C, CB, CX and CXL. A complete data pack consisting of: the Operator's Instruction Manual(including Instructions for all the Accessories and the "Javelin" Electric Etcher), a Parts Manual as Sectional Drawings and a set of detailed Sales, Accessories and Technical specification catalogues (an additional 46 pages).
THOMPSON Grinder Co. (USA) Surface Grinding Machines Models A, B, C, BB, 4C, 5C & 3B. Operating manual with bearing and other adjustment instructions. Includes sectional drawings through a number of parts.
Wadkin Model C Range of Power Band Ripsaws (C5, C6, C7, C8 and C9) Instruction and Parts Manual.
YAMAZAKI MAZAK Precision Lathe Models A, B, C and D - sometimes marked as the Model MK530 (the carriage handwheel can be found both on either the left or right-hand sides of the apron). Operating Manual with Parts as Detailed Sectional Drawings. Includes high resolution pictures of the often worn-out screwcutting and feed chart and a copy of the maker's detailed and well-illustrated Sales & Specification catalogue. Although the operating instructions are basic,but. rest of the publication superb.
Yamazaki Mazatrol M-32 Electrical Circuit Diagrams and Parameter Lists + Additions in Version C Operating Manual.
NUTTALL 6.5-inch centre height Lathe Models C, D, E and F. (Australia). Sales & Technical Specification Catalogue. 4 pages
S525 STAR Watchmakers' Lathes. 7 Sales Sheets showing the boxed lathe sets B, C D, E, F, R, the base-mounted with countershaft and motor Combination Set No. 9m.C., therare maker's stand-mounted unit with drawers, countershaft and light unit and a page on the simple "turns" versions. English French and Spanish Text
TAYLOR HOBSON Pantograph Engravers: Sales & Technical Specification Catalogues that cover the Company's Models C, CB, CX, CXL, JH, A, D, NH, K, Model K Mk.2 and the "Pantograph Milling & Diesinking Machine" 50 pages.
Taylor Hobson: a collection of individual Sales and Technical Specification Catalogues that cover the entire range of post 1930 Pantograph Engravers as made until the 1970s:
Model A early; Model A late; Models C, CX and CXL; Model D early; Model D late; Model JH early; Model JH late; Model K Mk.1; Model K Mk.2 early; Model K Mk.2 late; the special Taylor Hobson inclinable dividing head and the "Pantograph Milling and Diesinking Machine"; 52 pages.
TAYLOR HOBSON Engraving Machines & Electro-Etching Appliances. Early Sales & Technical Specification Catalogue showing the traditional and well-established Models C, CB and CX Models and the pantograph & Diesinking Machine, Cutters, Cutter grinders, Copies, Copy Holders, circular tables, dividing heads, Javelin etchers. Includes a description of how the engravers are designed, how they work, their drive systems, examples of work produced, special applications of the dividing head, special applications of the ball-bearing spindles, etc. 45 pages.
THOMPSON Surface Grinders (USA) Two Catalogs covering the Surface Grinders Types C, B, BB and the Automatic Broach Grinding Machines and the 12" x 36" Universal Grinder model from the 1930s. 28 pages
Boxford lathe Tumble Reverse Gear Early Models
This gear is for all Models prior to Serial Serial No. 11-13513 - the introduction of the Mk.2 Models that have a single...
Tailstock screw and bronze nut to fit all models of Boxford 4.5 and 5-inch centre height belt-driven lathes: Models A, B, C, AUD, BUD, CUD, VSL, ME10, Model T and TUD, CSB, etc.
RING GEAR to repair the main spindle Bull Wheel (the larger of the two gears on the main spindle). Machine off the damaged teeth and shrink or Loctite the new gear in place. Can...
- 1 of 2
- next ›