Emco Emcomat 7 machining centre - an Emco 7 lathe complete with the 4-speed vertical milling head. This compact and versatile assembly has 3.5" (90 mm) centre height and 17.5" (450 mm) between centres. Two very useful features are the excellent spread of speeds - 65 to 2800 r.p.m. - and the ease of changing them. There no belts to move, only two headstock-mounted levers and the 2-speed, 1-phase electric motor push buttons. The 4-speed vertical head is self-contained with its own motor and control from push buttons on the headstock.

Workshop clearance - a collection of items for disposal. Offers on the following are invited - as well as those items illustrated but not named. Please phone to discuss.

STARTRITE Bandit bandsaw, tall light green, £450

Surface plate £75

CORNER NOTCHER Blue, floor standing, £150

GABRO folder. A nice item £600

GABRO 3M2 GUILLOTINE / NOTCHER - offers

Myford Mini-Kop Model 1A automatic hydraulic production lathe. In complete, original and unmodified condition. Includes an original copy of the Operation Manual. Full details of the Mini-Kop and how it was developed can be found here

Myford VMC vertical milling machine. Single-phase electrics and fitted with a 2-axis DRO and a number of cutter holders and various items of tooling that surround the machine and shown in the photographs. Table 6" x 24" (150 x 620mm) with a longitudinal travel of 16.625" (422mm), across of 6" (150mm) and Vertically 12.375" (315mm). Full details of the specification can be found below and details of these Myford milling machines here

Colchester Student Mk. 2 Lathe 6.5 " x 24" still in its maker's paint finish. Hardened bed with a detachable gap piece and fitted with the safety apron with single-lever engagement of the sliding and surfacing feeds - the automatic throwout being adjustable by rotating the lever.

Portass Model S lathe 3" x 16" gap-bed, backgeared and screwcutting. Mounted on the maker's stand with the original and rather unusual "compound drive" from a new 1.1 kW single-phase motor with a starter switch. A restoration of the lathe has been undertaken and it's now in full working order. As an example of the work undertaken, one arm of the casting supporting the back gear shaft was damaged; a new arm was grafted on (aircraft standard) then line bored and new bearings installed. New headstock bearings, oil pots, drive belts, 1.1Kw electric motor and starter switch.

Hayes Diemaster precision vertical milling machine Type 21a Serial Number 161. Table 21" x 6.5" with a reground top.  No. 2 Morse spindle taper with speeds from 50-2400 r.p.m. run from the original three-phase motor and includes a high-quality Transwave one-phase to 3-phase 3.7KW converter complete with a balancing motor for better performance. This is a very clean example of a robust, well-built and easy-to-use machine. All the sideways are good with smooth movements and pleasant to use. All spindle bearings and the drive gearbox are in good order.

A new watch/instrument maker's milling machine by John Stevens. Complete with drilling quill, horological 8mm spindle and ER collet spindle, machine vice and all the necessary tee bolts, allen keys, chuck key, spare drive belt, adjustable 24volt power supply and various other parts. There is a movable and flexible light system also included. The machine comes with a 5C collet indexable headstock that can be driven via a rear pulley to enable turning when mounted on the rear table. Standard 5c collets (not included) of up to 1” can be used for turning or gear cutting, etc.

Schaublin 102N - a late-model example and mounted on the correct maker's cabinet stand with storage. The bench top measures 150cm x 80cm and the height 85 cm. Overall bed length is one metre.

 ANVIL - double-horned type. Please phone for more details. £75 or offers.

South Bend Heavy 10 Toolroom Lathe. 5-inch centre height, 21 inches between centres, a 1-3/8" spindle bore, a 1-inch collet capacity and driven by a variable-speed 1-phase to 3-phase inverter that extends the range of the standard 12 spindle speeds. This is the genuine Toolroom version, mounted on the maker's rigid cast-iron underdrive stand and fitted with a taper turning, a screwcutting gearbox, power cross feed and a full collet set on an integrated mounting board.

Duro Pillar Drill. A high-quality, American-made machine of especially sound construction. Fitted with a genuine Jacobs 1/2" capacity drill chuck and the original motor with a built-in switch.

John Stevens high-precision miniature lathe. 50 mm centre height and about 100 mm between centres. This is a unique lathe, built as a one-off by the renowned builder of small milling machines, John Stevens. Complete with two powered vertical milling and drilling attachments, 3-jaw ring-scroll precision 3-jaw chuck. tailstock chuck and all the small parts are shown in the photographs. Variable-speed DC motors with a single-phase control box. Milling machines by John Stevens can be seen here

Astra L2/L4 Milling Machine for sale with the maker's (very expensive) powered vertical head with 60mm of travel to the No. 2 Morse spindle, 1-phase motor with reversing switch. The miller was built in the 1970s but is still a current model - the motor for the horizontal drive is 1-phase.
Table 430 mm x 130 mm. Traverse 300 mm x 115 mm. Arbor to table 220 mm max. Arbor diameter 25.4 mm. Weight 140 - 155 kg. Reversing switch. MT2 spindle

Myford ML7 lathe 3.5" x 20" gap bed, backgeared and screwcutting. Bought new by my father in 1952 (Serial No K24436) and has been well-maintained over the years and kept in c/heated rooms - the paint finish is the original. Mounted on a Myford cabinet stand Single-phase 1/3 hp motor with a reversing switch.

A special and immaculate Boxford Model C lathe 4.5" x 24" backgeared and screwcutting. This lathe has been restored, over 400 hours, to the highest standards by an ex-Dean-Smith & Grace machine tool fitter with the bed and slideways have all hand scraped back into perfect alignment. Comes with a 3-jaw chuck, the correct half-depth body 6-inch 4-jaw chuck, a set of screwcutting changewheels including an inch-to-metric 127/100t transposing gear, genuine Boxford 4-way toolpost, thread-dial indicator faceplate, and a catchplate. The lathe’s first owner was Mr.

Elliott Progress 10-speed Drilling Machine Model 2G with a No.2 Morse taper spindle. Fitted with a slow-speed "backgear", the Progress No. 2G has ten speeds that span around 36 to 2750 r.p.m. so allowing a very wide variety of work to be undertaken. Single-phase motor and in full working order. Full details of these drills can be found here.

Sharp Universal Vertical and Horizontal Milling Machine. In perfect condition and full working order. Backgeared for gear-driven low speeds when horizontal milling and fitted with variable-speed drive using a 3-phase .55 kw motor controlled by a VFD (replacing the original .3KW single-phase motor which is included). This drive system has transformed the miller by making it bi-directional with speed controlled by just turning a knob. Table 16'' x 4.5'' with two T-slots able to be swung 25° in either direction from central.

Boley Model 3L or 4L backgeared and screwcutting lathe - for restoration. Long-term stored but with a mass of equipment including a set of screwcutting changewheels, spare chuck backplates - and everything shown in the photograph. Complete with a single-phase motor (untested), push-button starter and a "fast-and-loose" clutch-type countershaft. £295 or offers Full details of these lathes and their specification can be found here.

Emco FB2 Vertical Milling Machine. A well-made, compact and versatile machine with a table 25" x 6", longitudinal travel of 15 inches, cross travel of 5.5" and 14.5" of vertical travel on the head. The quill travel is 1.6 inches and the spindle bored with a No.2 Morse taper. Single-phase motor with six spindle speeds from 120 to 2000 r.p.m. Complete with comprehensive equipment including four genuine Emco accessories: a rotary table, a collet chuck with a set of collets, a boring head and machine vice.

Edgwick Mk.1 Lathe 6.5" centre height and 36 inches between centres. Fitted with a full screwcutting and feeds gearbox and a gap bed that allows a disc 20 inches in diameter and 5 inches to be swung. Spindle bore 1.75" (44mm). A robust and reliable lathe, this example is in full working order and unmolested, original condition. 4-way toolpost, built-in thread-dial indicator and a 3-jaw chuck. £650 or offers. Full details of Edgwick Mk.1 lathes here

Boxford ME 10A 5" x 24" lathe with a full screwcutting and feeds gearbox, power cross feed, coolant and a spindle clutch (the only Boxford model ever to have the latter fitting).  This is a very late model and in exceptionally fine condition - having had just one owner from new in 1981 and - from the appearance of the original paint and slideway - very little used.

Cowells 90ME Precision Miniature Lathe. The lathe is exceptionally well equipped with a range of genuine maker's accessories that include: a milling slide with machine vice, a Burnerd precision ring-scroll 3-jaw chuck, a Burnerd 4-jaw chuck, another 3-jaw chuck, a dividing attachment, fixed steady, travelling steady, a quick-change toolpost with 4 tool holders, a 4-way toolpost, a set of collets and a collet holder, a set of screwcutting changewheels, faceplate, two angle plates, four die holders, a rear toolpost for parting off, a tailstock chuck and revolving tailstock ce

A fine example of Union L.I.A.S. backgeared and screwcutting 3.5" x 16" lathe. The lathe was purchased in the early 1960s and used by a qualified machinist in his spare time to produce parts for a model steam engine - when it regularly worked to tolerances of 0.0005". As well as turning, the lead screw was used to plane splines. One of the photographs below shows an example of this work. The lathe is driven by a belt from a motor mounted on a purpose-built bracket - this originally being fastened to the wall behind the lathe.

Lorch LLV precision plain turning lathe. 65 mm centre height and 225 mm between centres. Complete with a high-precision Burnerd 3-inch adjustable 3-jaw chuck. Also included is a compound slide rest (complete with the lathe from which it came) that could be adjusted to the Lorch bed and a choice of single-phase motors. £350 or offers. Details of Lorch LLV lathes here

For Sale: Amolco Vertical Milling Machine. A very tidy example mounted on a solid, inch-thick steel plate on top of a cabinet stand. This compact miller has seen little use in my ownership as it was always a little small for my needs. I've now a bigger miller, so this one is surplus to requirements. Comes with a single-phase motor, a Clarke table, a good-quality swivel-base machine vice, a Jacobs drill chuck and a little MT1 flycutter. Details of Amolco Millers here

Drummond Vintage Lathe circa 1910 - complete, original and in full working order. 3.5" x 15" gap-bed, backgeared and screwcutting. Mounted on the original maker's stand that has been motorised but retains the correct treadle-driven flywheel assembly. Complete with all the extensive tools and extras used by the last long-term owner.

Small Hand-operated Shaper of unknown origin. Complete and works £225 or offers. Also available: a small, clever, home-made drill press and a double-ended grinder. Offers are invited for single items or all together.

Hayes Diemaster Precision Vertical Milling Machine - a compact, high-class machine tool in full working order. Retrofitted with an infinitely variable speed motor drive. Table 21 x 6.5 inches. The swivelling vertical head has a No.2 Morse taper and fine down-feed through a worm-and-wheel gearing. Complete with a machine vice, an ER25 collet set and a clamping kit. I now urgently need the room, so the price has been reduced to a bargain £950.

An exceptionally fine, one-owner-from-new Myford ML7 lathe, 3.5" x 20 backgeared and screwcutting and in its original maker's finish. Very carefully used and fitted with an excellent range of accessories including a Cowells quick-feed capstan tailstock handle (and the standard screw-feed spindle), the correct half-depth body Burnerd 6-inch 4-jaw chuck, 7 "Norman Patent" quick-set toolposts, two Burnerd 3-jaw chucks, 3 sizes of tailstock chuck, tailstock rotating centre, graduated handle to the leadscrew end, tailstock sliding die holders, a handle to turn the spindle manual

Boxford Lathe 4.5" x 22" backgeared and fitted with a screwcutting gearbox and 16-speed drive from a single-phase motor with a Dewhurst reversing switch. Owned by a retired Bristol Aerospace engineer and used in a hobby workshop for thirty years making clocks and steam engines - cutting mainly brass and alloy. It's well-maintained and in good condition. The indexing toolpost is mounted directly on the cross slide but the normal tool-holding top slide is, of course, included. Mounted on a metal bench with shelves. Accessories include:

Hommel UWG1 multi-function machine tool. It appears to be largely complete and with a number of accessories as shown in the photographs including a large number of screwcutting changewheels and collets. The only fault appears to be a broken bracket on the motor mount. More pictures available if requested. The machine is in the USA but I am happy to pack securely and ship worldwide at the buyer's cost. US$5000 or offers. Full details of the Hommel UWG1 can be found here

Colchester Bantam Lathe with a maximum capacity of 5.75" centre height and 23" between centres. Mounted on the maker's stand with a full-length splashback and fitted with a top-quality Newton-Tesla variable-speed drive system working from a household 1-phase supply.

CAPCO manually-operated surface grinder complete with an Eclipse magnetic chuck. A robust, compact and reliable little surface grinder. It's supplied with new single-phase motor which requires mounting and switch gear. Easily transported in an estate car, van or trailer. We can help load - and there is easy access to the workshop. A bargain at £350.   Details of Capco surface grinders here

This is a late-model Perris lathe - fitted with a proper Parvalux motor and very similar to the first Cowells lathe .  There is a complete description of the Perris lathes on lathes.co.uk where you'll find the complete specification

Boxford ME10 single-phase imperial lathe 5" x 22". This late-model ME10 has the same mechanical specification as the AUD with a screwcutting gearbox and power sliding and surfacing feeds. The motor, though, is mounted behind the headstock using a very compact arrangement that allows (if required) the lathe to be bench-mounted.

Toyo ML-1 Miniature Precision Lathe 2" centre height and 10" between centres. 590mm long, 260mm wide and 175mm high (23.5" x 10.25" x 7"). I bought this lathe in the early 80’s to use for prototypes in my precision turned-parts company where we ran cam-operated auto lathes. I'm the only person to have operated the Toyo and, after the company closed in 1998, I brought it home for my clock-repairing hobby. It has been used for fewer than 100 hours since new.

Colchester Bantam Lathe 5.75" x 20" metric specification and mounted on the maker's stand with a stainless steel backsplash with 2 shelves. The lathe is still in the maker's paint finish, in very good condition and everything works as it should - and is a pleasure to use.

Warco "Super Min Lathe" with variable-speed drive and in hardly-used condition and with an excellent specification: mounted on a chip tray with a full-length splashback. 90 mm centre height and 350 mm between centres. Speeds 50 to 1100 r.p.m in the backgear-driven low-speed range and 100 to 2500 r.p.m in high with a digital rev counter. 3 Morse headstock taper, No. 2Morse tailstock. 3-jaw chuck, thread-dial indicator, 4-way toolpost, changewheels, centres, two tailstock chucks, tailstock rotating centre, sliding tailstock die holder, and turning tools etc.

For Sale: Harrison M250 Lathe 5.7" x 30" (long bed). Mounted on the maker's stand with a full-length splashback, hardened bed, infinitely variable-speed drive from a 1-phase to 3-phase converter, a 2-axis DRO and dual inch/metric feed dials.

Myford Super 7BPXF Long Bed Lathe - Serial No. SKL 126833 3.5" x 30" fitted with an Imperial screw-cutting gearbox with transposing changewheels for metric and BA pitches and power cross feed. Mounted on the maker's industrial cabinet stand, chip tray, raiser blocks and 1-phase electrics. In excellent condition with unworn bedways and in the maker's paint finish.

For Sale: Nicely Presented Mid Year Myford Super7 Lathe - 3 1/2" Centre height backgeared gap bed screwcutting centre lathe. £1330 (accessories also available). Sussex UK - RH16 Postcode *** Text "Super7" to 07946 353358 for prompt callback (call screening) ***

Twin Milling machine - price reduced to a bargain £950 as time is not on my side. One owner from new and preserved in original condition and full working order with a single-phase motor and a " STARTET" push-on-push-off starter. Mounted on a fabricated stand, the miller uses a conventional cast-iron column with ways for the knee formed on its front surface. The knee is elevated by a front-mounted screw - in the manner of a Centec 2B - and carries a 20" x 6" table with two T-slots.

Emco Unimat SL1000 lathe complete with the rare and very useful power-feed attachment. 3-jaw chuck, the correct machine vice, vertical milling column and bracket, T-slotted milling table with T-bolts and clamps, faceplate, 4-way toolpost, drive dog, tailstock drill chuck, live and dead centres, tool holders, and a grinding wheel. Retro-fitted with a 24-volt variable-speed DC motor and speed controller for enhanced reliability. Needs new belts. Full details of these very handy and effective lathes here

Cowells Miniature Precision Vertical Miller. Fitted with the maker's original variable-speed drive system, a high-quality, English-made Parvalux 1/6 h.p., continuously-rated DC motor that can be varied from 40 to 4000 r.p.m. with positive drive by a toothed belt. Both the knee and 8" x 2" table are in cast iron while the hardened and ground spindle runs in a pair of high-precision, 48 mm diameter, angular contact bearings - these having their pre-load able to be set by a fine-threaded adjuster nut.

Hardinge HLV-H High-precision Toolroom Lathe 5.5" x 18" backgeared and with variable speed drive from 125 to 3000 r.p.m. The power sliding and surfacing feeds are driven independently by an electric motor, this system allowing for any combination of rotational and cutting feed rates to be set. The lathe has been standing, unused, for 6 years in a dry workshop and so needs a good clean before being returned to use. A data pack with Operation, Maintenance and Parts Manuals is also included.

A set of 18 genuine Schaublin horological collets. £500 or offers. These are currently listedm new, at over £1500. Please phone 01267-222856 for further details.

Dore Westbury "ram-head" Vertical Miller. A most versatile machine with a head that can be elevated, swung, tilted and moved in and out. Fitted with a No.2 Morse taper socket and a standard Myford thread nose that allows chucks, etc., to be fitted. Included is a complete boxed set of Myford No.2 Insert collets that fir into the spindle of the miller and are used to hold cutters (those boxed sets usually sell for over £100) The spindle has both worm-and-wheel gearing for fine feeds and a rapid-action drilling quill.

Myford Super 7B Lathe 3.5" x 19" gap-bed, backgeared, fitted with a screwcutting gearbox, spindle clutch, gravity coolant, digital readout on the cross slide and mounted on the maker's industrial cabinet stand. 1-phase electrics.