We are open!

We are open and working as normal, though the postal system in some countries is still slower than usual. If your order is urgent, contact us to arrange special delivery.

For Sale & Wanted

Welcome to our classified adverts pages. If you'd like to advertise a machine or accessories here, or would like to place a Wanted advert, click one of the buttons below. You'll need to be logged in first; If you don't yet have an account with us, you will be asked for an email address.

You can narrow down your search using the options below:

Asking price: £3,750.00

Colchester Bantam 2000 lathe in superb, lightly-used condition. The Model 2000 was the top-of-the-range model in the Bantam Mk.2 series. 6-inch centre height and admitting 30 inches between centres. Mounted on the maker's cabinet stand with drawer storage and a full-length splashback with a tool tray. Induction hardened bed; the spindle runs in hyper-precision Gamet bearings, has a bore of 1.25" and 16 Spindle speeds from 38 to 2000 r.p.m. The Model 2000 was the top-of-the-range model in the Bantam Mk.2 series.

Location: Brentwood, United Kingdom
Asking price: £95.00

Eclipse Magnetic Chuck 10” long x 5” wide x 2” high. It has been kept in good condition - but not used in the last 30 years. It comes in it’s original Eclipe packaging and is in full working order. £95. I can post within the UK for £14 Details about these high-quality chucks and how to use them here

 

Location: Chelmsford, United Kingdom
Asking price: £550.00

Harrison L5A 11-inch Lathe running on single-phase electrics.  It has a full and feeds screwcutting gearbox and the correct 2:1 change wheels. Accessories include a vertical milling slide, 4-way toolpost, a machine vice, thread dial indicators, tailstock chuck, tailstock rotating centre, a sensitive drilling attachment, catchplate, various Morse adapter sleeves and centres and a spare headstock spindle. The self-act works on the X and Y modes but leadscrew will not engage.

Location: Tyneside, United Kingdom
Asking price: £1.00

Lorch LAS High-precision Lathe 2.5" x 11.25" backgeared and screwcutting and fully restored. For this lathe the makers claimed a turning accuracy on both sliding and surfacing feeds of better than 0.00012", a figure almost in the grinding-machine class. Offers invited. Full details of Lorch LAS lathes here

Location: United Kingdom
Asking price: £1,250.00

Myford Super 7 lathe. 3.5" x 19" backgeared and screwcutting. Mounted on the maker's cabinet stand with levelling blocks and a deep chip tray. Fitted with a Burnered Grip-tru high-precision adjustable 3-jaw chuck, tailstock chuck, machine vice to mount of the T-slotted cross slide. Single-phase electrics with a Dewhurst reversing switch. The cabinet stand is packed with bar stock and other useful materials. In full working order - but stored unused for some time and does need a sympathetic clean.

Location: Newport, Wales, United Kingdom
Asking price: £475.00

Deckel/Alexander & Stent Cutter Grinders and a Johansson Slip Gauge Set. The Deckel/Alexander has a set of collets and the Stent is set up to run with a single phase motor. The Deckel/Alexander is £475 and the Stent £375.
Offers are invited for the Johannson slip Gauge set. Details of Deckel/Alexandet tool + cutter grinders here and  Stent tool & cutter grinders here

Location: Dover, United Kingdom
Asking price: £1,650.00

Harrison 12 inch toolroom lathe Model L6 in superb mechanical order. Owned by the same engineer for 40 years and extremely well looked after. Single-phase motor and coolant pump together with everything you need to get started including a very useful TravAdial carraige travel indicator, 127t metric-transposing changewheel, 3-jaw chuck, micrometer carriage stop, 4-jaw chuck, 4-way toolpost, faceplate, travelling steady, tailstock chuck and rotating centre, turning tools and a spare chuck backplate. I can pallet and wrap for collection or load free of charge.

Location: United Kingdom
Asking price: £1,500.00

Emco Compact 10 lathe with a powered vertical milling head and mounted on the maker's cabinet stand.  5.5" centre height with 26.5" between centres. Running from an infinitely variable-speed 1-phase to 3-phase inverter that gives a very wide range of spindle speeds and carriage-feed rates. The lathe is in good order and sold with all the equipment shown - 3-jaw chuck, quick-change toolpost, 4-jaw chuck, indexible cutting tools, set of screwcutting changewheels, tailstock chuck and rotating centre, and two knurling tools, etc.

Location: United Kingdom
Asking price: £1,550.00

Harrison 13-inch Lathe with a hydraulic copying attachment and clutch and braked control of the spindle. Powered by an infinitely-variable speed 1-phase to 3-phase inverter giving a very wide range of spindle speeds and carriage feed rates. The lathe runs well and the bedways are in remarkable good condition. Complete with a 3-jaw chuck, 4-way and a rear toolpost, thread-dial indicator The copy equipment is complete but not tested - the same applies to the coolant pump. The chuck guard is not included but can be purchased if required.

Location: United Kingdom
Asking price: £300.00

EXACTA Capstan lathe on the maker's cabinet stand. Single-phase motor with reversing gear. This is a neat little machine in full working order and with a positive capstan operation. I can pallet and wrap for collection or assist with loading free of charge. £300 or offers. Details of Exacta capstan lathes here

Location: United Kingdom
Asking price: £650.00

Myford ML7 lathe 3.5" x 20" gap-bed, backgeared and screwcutting. Mounted on the maker's cabinet stand and complete with a 1-phase motor, 3-jaw chuck, Dickson quick-set toolpost, and a set of screwcutting changewheels. In full working order. Details of Myford ML7 lathes here

Location: Middlesborough, United Kingdom
Asking price: £5,500.00

Myford 254S Lathe with the maker's powered vertical milling head and a hardened bed - and very little used. On the maker's cabinet stand with a full-length splashback and tool tray and complete with a range of expensive extras including a proper D1-3 spindle nose, a two-axis DRO, coolant, long-T-slotted cross slide, Burnerd Multisize collet chuck, Myford swivelling Milling slide, Burnerd Grip-tru chuck, other 3-jaw chucks, 4-jaw chuck, two fixed steadies, quick-set, standard and rear toolposts, Dial-thread indicator, large faceplate, several tailstock chucks, tailstock rota

Location: Norwich, United Kingdom
Asking price: £650.00

Reduced for quick sale: Elliot Downham High-precision Mini-Jig Borer/Vertical Miller mounted on its own integral cast-iron cabinet. This is a superb quality, British-made machine serial number BEC015246/118. Single-phase motor with 8 speeds fitted with single-phase motor. Eight speeds via cone pulleys. Although cosmetically in need of refreshing, this machine is in perfect working order and, unusually, still has its complete set of eighteen size 00 Hardinge collets up to 1/2" diameter. Single-phase motor.

Location: Basildon, Essex, United Kingdom
Asking price: £1,550.00

Myford Super 7 lathe with power cross feed, mounted on the maker's industrial cabinet stand and running on a household 1-phase supply.

Location: Bromley, United Kingdom
Asking price: £2,995.00

For Sale: Wabeco CCD6000E CNC and Manual Lathe complete with "Plus PC" and all the Software. This example has the larger spindle bore and the screwcutting changewheels as well as a laptop PC, backups of the software and the Dongle required to activate it. I am not up to speed with the software and, although I have had the machine moving under CNC control, I can't remember how I did it! Bought for a project thinking I would learn how to use it but ended not needing it. I now don't have time to study the included Instruction Manual - and I could do with the space.

Location: Redcar, United Kingdom
Asking price: £750.00

Quorn Tool & Cutter Grinder with accessories and grinding wheels. A beautifully-built example, mounted on its own base with storage drawer, motorised and ready to use. It comes complete with the instruction and build book, engineering drawings and a copy of a magazine featuring the Quorn. £750
Engineer's Oak Tool Box with a set of Johansson Slip qauges and a selection of other equipment. £250

Location: Near Chartwell House, Kent, United Kingdom
Asking price: £850.00

1) Arboga Geared-head Vertical Milling & Drilling Machine. This is a heavily-build, high-quality machine manufactured in Sweden. No.2 Morse taper spindle and a 1-phase motor. £850  Details of Arboga milling machines here

2) Single phase, floor-standing bandsaw branded "Perform" £275

Location: (Diss, Norfolk), United Kingdom
Asking price: £375.00

Myford ML8 Wood lathes - three examples:

1) A bench-mounted model fitted with the maker's compound slide rest for accurate wood turning and light metal work. A Burnerd 3-jaw chuck is fitted to the spindle and there is also a hand-T-rest and a good collection of turning tools. Single-phase motor. £375 Details of ML8 wood lathes here

2) Myford ML8 "Universal Woodworker" with a saw bench and sanding disc unit. Single-phase motor. £275

Location: (Diss, Norfolk), United Kingdom
Asking price: £650.00

Myford ML7 lathe 3.5" x 20" gap-bed, backgeared and screwcutting. Powerful 1-phase motor, 3-jaw chuck, thread-dial indicator, several tailstock chucks, tailstock rotating centre, set of screwcutting changewheels and boxes of assorted parts. Details of Myford ML7 lathes here

Location: (Diss, Norfolk), United Kingdom
Asking price: £950.00

Pultra P-Type High-Precision Lathe on the maker's raiser blocks that lifts the centre height from 50 to 90mm. Complete with a screw-feed compound slide rest,  68 wire collets, 5 step-up collets, 5 cone collets , 3 wax chucks, several sizes of hand T-rest, 3-jaw chuck, 4-jaw chuck, tailstock chuck, and some other related items..

Location: (Diss, Norfolk), United Kingdom
Asking price: £575.00

For Sale: Centec 2A miller on the maker's original cabinet stand and with the later all-geared drive. I have owned this machine for a number of years and it performs very well. The table has both a fine feed by screw and a rapid traverse for slotting work by a lever.The feedscrews and nuts are in excellent condition with low backlash and the table clocks true to within tenths of a thou. The spindle is 2 MT with a captured-by-nut drawbar (can be exchanged by unscrewing a lock nut).

Location: United Kingdom
Asking price: £450.00

Smart & Brown Model L high-precision plain-turning lathe on the maker's compact underdrive stand. This is very late machine with the rare 12-speed headstock (with a large 1.25-inch bore)  giving 147, 202, 282, 390, 541, 588, 814, 11226, 2156, and 3000 r.p.m. In very good condition, the lathe has a 4-inch centre height and takes 13.5 inches between centres The spindle takes the common and inexpensive 5C collets (there are 12 with the machine) and the nose is threaded for chucks (a 3-jaw chuck is included). The tailstock is No.1 Morse taper.

Location: United Kingdom
Asking price: £5,340.00

A beautiful Bridgeport milling machine that has never been used in a production environment and fitted with a high-class Heidenhain DRO. I have its original sales invoice and manual. I bought it from a Polish model engineer and did not think I would have to sell it, however I cannot take it with me so I am offering it for sale rather than put into long term storage. The ways have never been re-ground and it's almost as fresh as the day it was made, there being just a few light marks on the table.

Location: Cockermouth, United Kingdom
Asking price: £950.00

For Sale:  Clockmakers’ Wheel & Pinion Cutting Engine by Chronos mounted in the original box with 1/20 h.p. 1-phase Comtex motor, its mount being adjustable for belt pulley alignment and tension. This beautiful clock-making engine is equipped with: 4 Spindles for wheel blanks with mounting sleeve; 2 fly cutter frames; 4 fly cutter spindles, 1 ball race cutter mount; 2 ball race cutter spindles; 4 wheel and pinion mounting collets; pinion cutting support. £950.

Location: Pickering, United Kingdom
Asking price: £1,500.00

Tom Senior Major M1 milling machine complete with S-Type self-powered, swivelling vertical head with both wheel-controlled fine downfeed and a lever action drilling action - both along the axis of the spindle. Both motors are three phase with the horizontal drive powered through a Drives Direct 1-phase to 3-phase infinitely-variable speed inverter. The vertical head is in overall good condition, the table slideways are tight and it can turn out some respectable work.

Location: Newton Abbot, United Kingdom
Asking price: £3,500.00

For Sale: Bridgeport Series 1 Varispeed Milling Machine. This is not the usual heavily-used-in-industry type but one supplied new to a hospital and then into the workshop of a model engineer.

Location: Canterbury, United Kingdom
Asking price: £115.00

For Sale: No. 4.5 Morse taper adapter sleeves down to 3 Morse. To fit the headstock spindle socket of Colchester Bantam and Chipmaster lathes (and various other machines as well). UK-made and hardened (nitrided). A top-class product. £115 plus post. For more details please phone: 07522-194210 or email: howard.j.goddard@icloud.com

Location: United Kingdom
Asking price: £1,350.00

Cowells ME 90 miniature precision lathe with a gap bed, backgeared and screwcutting. Dry stored for eight years and in full working order. Complete with: Four-jaw chuck, milling slide,  faceplate, centre three-way key, carbide tool holder and tips, set of tipped tools and a new drive belt.  Collection only - Folkestone, Kent.  Full details of Cowells lathes here

Location: Folkestone, United Kingdom
Asking price: £850.00

Myford ML7 lathe 3.5" x 20" gap-bed, backgeared and screwcutting. In lovely original condition and long-term owned by a very careful user.

Location: Disley, Stockport, United Kingdom
Asking price: £3,500.00

Myford ML10 lathe 3.25" x 13" backgeared and screwcutting, mounted on the maker's raiser blocks and chip tray and fitted with a single-phase motor and a Dewhurst reversing switch. This is a fully functional lathe with a great array of accessories that will allow any hobbyist or professional to use the machine to its full potential.

Location: Manchester, United Kingdom
Asking price: £250.00

For Sale: a British-made, high-quality Model L1 Mk.3 Meddings 1/2" capacity bench drill. 5 speeds from 500 to 4000 r.p.m. The drill chuck is nearly new and the motor a 1-phase. This is the model with the optional T-slotted base plate. In perfect running order. £250 Full technical details of these L1 Mk.3 drills on this page.

Location: Basildon, Essex, United Kingdom
Asking price: £3,695.00

Wabeco CC-D6000-E Lathe (current price new €8591), Year of manufacture 2006. Can be used as either a CNC lathe or manually. The lathe is in as-new condition, in fact I suspect this machine has never been used for it stilll has its factory wax coating on the bedways and all exposed metal parts. Please note there is no rust on this lathe, the brown colour on bed ways etc is a factory protective wax coating which can easily be removed. The safety cabinet does have some marks on the perspex cover from storage and handling, but nothing that affects operation.

Location: Leeds, United Kingdom
Asking price: £1,250.00

Elliot Downham High-precision Mini-Jig Borer/Vertical Miller mounted on its own integral cast-iron cabinet. This is a superb quality, British-made machine serial number BEC015246/118. Single-phase motor with 8 speeds fitted with single-phase motor. Eight speeds via cone pulleys. Although cosmetically in need of refreshing, this machine is in perfect working order and, unusually, still has its complete set of 18 00 size Hardinge collets up to 1/2" diameter. Single-phase motor.

Location: Basildon, United Kingdom
Asking price: £550.00

Warco Super Mini lathe for sale. 180 mm (7.5-inch) swing and 350 mm (14-inch) between centres, all-metal gears and handwheels. This is a current model with variable speed and a superior version of the common Chinese mini lathe. Well equipped and complete with: 3-jaw chuck, 4-jaw chuck, faceplate, fixed steady, 4-way toolpost, graduated handles to both the leadscrew and tailstock spindle, fixed centre, changewheels to cut metric and imperial threads, maintenance tooling, the Operator's Manual and other manufacturer's literature.

Location: Wiltshire, United Kingdom
Asking price: £550.00

Warco Super Mini lathe for sale. A current model with variable speed. Specification.180mm (7.5-inch) swing and 350mm (14-inch) between centres. All metal gears and handwheels. A superior version of the common Chinese mini lathe complete with 3-jaw chuck, 4-jaw chuck, faceplate, fixed steady, fixed centre and change gears to cut metric and imperial threads. Is complete maintenance tooling, the Operator's Manual and other manufacturer's literature. Also included is the Crowood Publication on the Mini lathe with much additional helpful information.

Location: Wiltshire, United Kingdom
Asking price: £750.00

Chester Model B 3-in-1 lathe and vertical miller. In superb, hardly-used condition this compact and versatile machine is mounted on the maker's stand. and only selling due to old age and the need to move house. This is still a current model from Chester (see this page). Complete with a 3-jaw self-centring chuck, a 4-jaw independent chuck, a Morse taper drill chuck for the tailstock and the milling head. 1-phase motor. £750.

Location: Crewe, United Kingdom
Asking price: £1,550.00

Colchester Triumph Lathe Mk.1.5 7.5" x 40" long bed with detachable gap. This is later model fitted with the single-lever, adjustable-overload system. It has been well looked after during it's 40 odd years at the Crich Tramway Museum and so in good condition and full working order (Serial No. 56757). Fitted with a full screwcutting and feeds gearbox, coolant, the usual L1 spindle nose, 4-position indexable toolpost, Imperial dials, chuck guard and light unit.

Location: Crich - Matlock, United Kingdom
Asking price: £1,250.00

For Sale: Centec 2B vertical and horizontal milling machine mounted on the maker’s cabinet stand with chip tray. This top-of-the-range model has all-geared drive, a 25” x 6”  power feed table with 14 “ of longitudinal travel, in traverse of 5” and vertically 9.5”. The table has both a fine feed by screw and a quick-action lever feed. Equipped with the Mk.3 swivelling vertical head with both fine down-feed and a quick-action drilling feed to the quill. A Clarkson Autolock chuck is included with what appears to be sets of both inch and metric collets.

Location: United Kingdom
Asking price: £1,400.00

Harrison Vertical and Horizontal Milling Machine running on 1-phase power with a Dewhurst switch. Fitted with a two-axis DRO, power feed on the longitudinal axis with pick-off gears to change the feed rate. 30 INT spindle nose and complete for horizontal work with the overarm, drop-bracket and cutter-holding arbor. Fitted with an 11cm. table vice, a Clarkson Autolock chuck with collets and an.

Location: Brixham, South Devon., United Kingdom
Asking price: £1,900.00

For Sale: Colchester Bantam Lathe 5.75" x 24" a fully -equipped metric-specification example with a 4 Morse taper headstock spindle, 3 Morse tailstock and mounted on the maker's cabinet stand with a full-length splashback. Runs on 240v through a variable-speed inverter which, combined with the headstock gearing, giving very fine control over the spindle speeds. Fitted with a digital readout, Dickson quick-set toolpost with 7 toolholders.

Location: Brixham, South Devon., United Kingdom

Would be grateful to find the right hand trip dog, part number 396-18-B, for an Elliott Omnimill 00 milling machine that a friend of mine is restoring in Spain. The part is a small casting formed with a tennon slot on the front and tapped to take a stop screw.

Location: London, United Kingdom
Asking price: £1.00
  • Machine Tool Accessories and Measuring Equipment
  • R8 Precision Boring Head on an R8 Bridgeport Taper. Complete boxed set. £430
  • SIP MIGMATE TURBO WELDER 130  £100                                                                            
  • Depth Micrometer 0.25mm (Boxed) Moore & Wright £100
  • Trammel Set - (boxed) Moore & Wright No.712-12 inch  £75
  • Vernier Height Gauge - No 350 (boxed) Metric £75
  • Dial co-axidal Centering Alignment Indicator - boxed, metric, as new. £45
Location: Maidenhead (Berks), United Kingdom
Asking price: £950.00

MYFORD ML10 Lathe 3.25" x 13" backgeared and screwcutting, mounted on the maker's raising blocks and chip tray. This is a late-model machine with a roller-bearing headstock spindle and Imperial graduations on the feed dials. In excellent condition and had been in storage for 30 years before I purchased it two years ago. I have added a infinitely variable-speed inverter drive unit by Newton Tesla that results in a machine superior to the ML10 "Speed Ten" with a minimal need to change the belt-driven speeds.

Location: Chesham, United Kingdom
Asking price: £1,350.00

Holbrook High-class Toolroom Lathe Model B No.8 Serial No. EW4831. 4” centre height x 20” between centres and mounted on the maker's original cast-iron stand. In very good mechanical condition and still capable of fine work. Fitted with power crossfeed - and all functions work as they should. I-phase motor and I've added a Myford Super 7 clutch system which makes the lathe much easier to use. This Holbrook would have been sold new to the Royal Small Arms Factory, Enfield and I do have a photograph showing inside the RSAF with machines on the same stand.

Location: Llanelli, United Kingdom
Asking price: £4,500.00

Colchester Student Mk.2. This is a lightly-used, 1975 all-metric model Serial No. Fc/75048 266e. 6.5" x 24" with a hardened bed, screwcutting gearbox, power sliding and surfacing feeds and fitted with a full-length splashback and tool tray. Supplied new to a Manchester college it was little used and then stored. for around 15 years.

Location: Manchester, United Kingdom
Asking price: £695.00

For Sale: Atlas 10-inch lathe Model TV36 5" x 24" backgeared and screwcutting with power cross feed and mounted on the maker's stand. 12-speed, all-V-belt drive countershaft with a single phase motor and reversing switch. In good condition, full working order and able to be demonstrated under power. Complete with a 3-jaw chuck, a 4-jaw independent chuck, tailstock chuck, faceplate, screwcutting changewheels and a set of turning tools.

Location: Hollywell N. Wales, United Kingdom
Asking price: £1,395.00

Boxford AUD Mk.3 lathe. A late-model example 5" x 24" with a screwcutting gearbox, power cross feed, single-lever engagement of backgear, coolant and mounted on the maker's underdrive stand. Included with the lathe is a 5-inch 3-jaw chuck, the correct half-depth body 6-inch independent 4-jaw chuck, Boxford quick-set toolpost with 2 tool holders (parting tool holder is damaged but serviceable, see pic.), catchplate and 2 drive dogs, a Jacobs 1/2" tailstock chuck, all the spanners and keys required, a set of Chinesium tools and a light unit.

Location: Ripon, United Kingdom
Asking price: £3,750.00

Myford Super 7B lathe. 3.5" x 19" gap-bed, backgeared, fitted with a screwcutting gearbox, power cross feed and mounted on the maker's cabinet stand with levelling blocks and a deep chip tray. This is a genuine Myford factory rebuilt unit from 2010 that has had very little use since. During the rebuild, it was also fitted with all-new electrical equipment.

Location: Grantham, United Kingdom
Asking price: £425.00

For Sale: Myford ML2 lathe 3.25" x 15" gap-bed, backgeared and screwcutting. A compact lathe complete with a countershaft and a single-phase motor.

Location: Maidstone, United Kingdom
Asking price: 2 495,00 €

Deckel Tool & Cutter Grinder; a Delta Fret Saw and Matheys Drill. These tools are in excellent working condition and regularly maintained. Some come with their original manual and accessories. They are all part of an estate sale  and must go before the summer.. Pickup only. Located in Brussels, Belgium, close to the Midi Train Station.
For more info and technical specifications for:
Matheys: http://www.lathes.co.uk/matheys/

Location: Brussels, Belgium
Asking price: 1 895,00 €

This 125 mm (5-inch) centre height Atlas lathe is in excellent working condition and has been regularly maintained. It comes with the original manual and accessories. It offers a huge capacity on a small footprint. Part of an estate sale, it must go before the summer. Pickup only, located in Brussels, Belgium, close to the midi train station.
For more info and the full technical specification for the Atlas lathe: http://www.lathes.co.uk/atlas/

Location: Brussels, Belgium
Asking price: £250.00

Must go by Sunday 3rd April - so any offer at all considered! Warco Milling and co-ordinate drilling machine. The head has both a fine downfeed by a handwheel working through worm-and-wheel gearing and a quick-action feed for drilling. In need of cosmetic restoration having been stored unused for many years. 1-phase motor and complete with a good quality Abwood machine Vice.

Location: Barnet, United Kingdom
Asking price: £1,150.00

For Sale: Pultra 15/90 high-precision lathe. This is the rare, larger Pultra with a 3.5" centre height and taking 20 mm through the headstock spindle. Mounted on the maker's underdrive, 9-speed Mardrive stand that gives 135 to 3265 r.p.m.. The lathe is complete with a screw-feed compound slide rest assembly and the very seldom found screwcutting attachment complete with a separate top slide - this having the Carden drive shaft, a set of changewheels and a screwcutting chart.

Location: Farnham, United Kingdom
Asking price: £325.00

Classic Plain-turning Lathe by the English maker Hines on the maker's stand. 3.5" x 20" gap-bed with a screw-feed compound slide rest; 5-circle indexing plate on the face of the headstock pulley and a 4-jaw chuck, In splendid, original condition.

Location: United Kingdom
Asking price: £450.00

For Sale:  Hobbymat MD65 lathe.  One owner from new, lightly used and complete with all original accessories and manual.  The lathe has served me well over the years and was originally purchased around 1986. Included is a 3-jaw chuck, a high-quality 4-jaw independent Burnerd chuck, angle plate, machine vice, tailstock rotating centre and a set of screwcutting changewheels.

Location: United Kingdom
Asking price: £1,250.00

Pultra Precision Instrument Lathe Model PB2 50 mm centre height by 200 mm between centres.

Location: United Kingdom
Asking price: £2,100.00

Sold Colchester Student Lathe 6.5" x 24" with all-geared headstock, a full screwcutting and feeds gearbox. Running from a 1-phase to 3-phase variable-speed inverter that gives very much both slower and faster speeds than normal. Comes with various steadies, an independent 4-jaw chuck, 3-jaw scroll chuck, fixed steady, travelling steady, Dickson quick-set toolpost, faceplate, the C-spanner to remove spindle fittings, light unit and a full-length splashback.. There is also a live centre, a Jacobs tailstock chuck, tool holders and selection of turning and boring tools.

Location: Nr Chepstow, United Kingdom
Asking price: £2,300.00

A Late-model Schaublin Model 70 Turret Lathe. This is a regularly used but very tidy example of this small high-precision lathe, which I have kept for rapid production of bronze bearings. The whole assembly, including a speed-controller variable-speed inverter, motor and countershaft is mounted on a single aluminium base plate and is easily portable for the average physique. The lever-operated headstock is of the F16 type with oversize bearings and so very robust with the spindle able to accept bar stock up to 13mm.

Location: Moreton in Marsh, United Kingdom
Asking price: £1,950.00

Tom Senior M1 Vertical and Horizontal Miller. This is a superb, top-of-the-range version in superb condition and fitted with an S-Type swivelling vertical head with a No.2 Morse taper spindle and both fine downfeed by a handwheel and a rapid drilling feed by a capstan handle. The horizontal spindle is "backgeared" giving a range of low speeds suitable for really heavy work. Fitted with coolant and a neatly installed electrical system with infinitely-variable-speed to the vertical and horizontal spindles with dial control.

Location: Cirencester, United Kingdom
Asking price: £1,950.00

Boxford AUD Mk.3 Lathe 5" x 24" backgeared and fitted with a screwcutting gearbox, power cross feed and coolant equipment. Mounted on the maker's compact underdrive stand and in excellent original condition. Driven by a single-phase, infinitely-variable-speed inverter with a dial-control of spindle speeds and rev counter. This lathe has only been used for model engineering.

Location: United Kingdom
Asking price: £2,300.00

A Late-model Schaublin Model 70 Turret Lathe. This is a regularly used but very tidy example of this small high-precision lathe, which I have kept for rapid production of bronze bearings. The whole assembly, including a speed-controller variable-speed inverter, motor and countershaft is mounted on a single aluminium base plate and is easily portable for the average physique. The lever-operated headstock is of the F16 type with oversize bearings and so very robust with the spindle able to accept bar stock up to 13mm.

Location: Moreton in Marsh, United Kingdom
Asking price: £1,950.00

For Sale: Boxford Model AUD MK II Lathe. 4.5 x 18 inch, with a screwcutting gearbox (complete with a set of metric transposing gears), power cross feed and driven by a high-quality Newton Tesla variable-speed inverter drive. The whole machine is in superb condition, the lathe still being in its maker's paint finish. Very well equipped including: T-slotted cross slide, 110mm Bison 3-jaw chuck (as new), a 125mm 4-jaw independent chuck, a Burnerd 160mm 4-jaw independent chuck, collet set with drawbar and spindle nose cap collets 1/16” to ½” x 1/32” with some 1/64” sizes.

Location: United Kingdom
Asking price: £195.00

Record DML 24X Wood Lathe with a swing headstock for bowl turning. 4.5-inch centre height and taking 24 inches between centres and with an industry standard 3/4" x 16 t.p.i. spindle nose. A really solid, twin-bar bed lathe that weighs 41 kg. 1-phase motor driving the spindle by a smooth and quiet Poly-V belt. No-Volt safety-release push button starter. One owner from new - stored some time so needs a good polish. Phone: 01782-205-184 or 0795-1239979

Location: Stoke on Trent, United Kingdom
Asking price: £475.00

For Sale: Tyme "Classic" Woodturning Lathe. 6.75-inch centre height and taking 36 inches between centres. This is an especially heavily built lathe with a really rigid bed in cast iron. Complete with a proper wood-turn 4-jaw self-centring 4-jaw chuck, some turning tools and a powerful single-phase motor controlled by a safety "no-Volt" release push button starter. One owner from new.

Location: Stoke on Trent, United Kingdom
Asking price: £0.00

A NEW SERVICE: For Colchester, Harrison - and any other lathe - a  cross slide, top slide and tailstock feed-screws and nut repairs. Single nuts and anti-backlash "double nuts" made. I can also tackle milling, capstan and grinding machines, etc. with Imperial, metric, Acme and square threads. Imperial from 5/8"" to 1.5" diameter and from 4 t.p.i. to 16 t.p.i. Metric from 16 mm to 40 mm diameter and 2 mm to 6 mm pitch. Phone: 01753-651923 or 01753-654523  email: richard@shotmaster.co.uk 

Location: United Kingdom
Asking price: £2,750.00

Deckel FP1 Universal Milling Machine. A late-model example from the 1980s with all-dial change of spindle speeds and table feed rates and complete with the essential multi-angle tilting and swivelling table, a 3-axis DRO, a Deckel FP1 dividing head on the correct FP1 table fitting, the maker's automatic lubrication system, a huge set of of Deckel direct-nose fitting collets and sets of ER25 and ER16 collets and a swing-into-position chip guard. In excellent working order but the overarm is missing and the table feeds need some attention..

Location: Walsall, United Kingdom
Asking price: £3,750.00

Myford 254 Plus Lathe. This top-of-the-range, superb-condition 254 has a 5.25" centre height, screwcutting gearbox, power cross feed, induction-hardened bedways, is mounted on the maker's cabinet stand and with one model-engineering owner from new. Fitted with a variable- speed Inverter drive with the inverter fitted into the cabinet. Original switchgear and all electrical safety features are fully operational.

Location: Ludlow, United Kingdom
Asking price: £750.00

For Sale: a high-quality, toolroom-class Milnes vertical miller (also branded SEMCO-0-DF) and built to pass the "1st Grade Acceptance Checks" by the Institution of Mechanical Engineers. Table 30" x 8.5" with 18 inches of longitudinal travel under power, 6.6 inches in traverse and 14.5 inches vertically. Spindle speeds: 50 to 1000 r.p.m. engaged by a clutch and table feeds from 0.5 to 10 inches per minutes. 40 INT spindle nose fitted with a Clarkson Autolock chuck with collets.

Location: Surry, United Kingdom
Asking price: £650.00

Halifax or Sphere Lathe - an English-made clone of the Atlas "10-inch". 5" x 24" backgeared, screwcutting, power cross feed, roller bearing headstock and mounted on the maker's stand. 1-phase motor, 16-speed all-V-belt-drive countershaft. 3-jaw chuck, 4-jaw chuck, 4-way toolpost, tailstock chuck, thread-dial indicator, a set of screwcutting changewheels, the original "lantern" toolpost, scribing block, Morse centres and a box of turning and boring tools. Long-term stored but in running order. This is a very compact lathe but with an enormous capacity.

Location: United Kingdom
Asking price: £450.00

A classic lathe of unknown make - but a robust 5.5" x 20" gap-bed, backgeared, screwcutting machine with power cross feed and in full working order. Fitted with tumble-reverse drive to the leadscrew and a large T-slotted saddle that can be used as a boring table.  In one family for 90 years (the son of the original owner made the toolpost and faceplate when an apprentice in the early 1950s). Fitted a very well-constructed, built-on countershaft unit with a neat belt-tensioning adjuster and a recent 1-phase motor controlled by a Dewhurst switch.

Location: United Kingdom
Asking price: £1,050.00

Naerok Vertical Milling and Co-ordinate Drilling Machine Model RDM350M mounted on the maker's and in exceptionally good order with little use and negligible wear. Table 20" x 6.25"  with 12.75" of longitudinal travel, 5.5" in traverse. The spindle has 3.5" of travel with both fine-feed by handwheel and a lever feed for drilling. The whole head elevates and, on the Naerok (unlike similar types), is lifted by a bevel box and guided so as not to loose alignment during long travels. The spindle fitting is R8 - allowing access to cheap and plentiful Bridge-type tooling.

Location: Hertfordshire, United Kingdom
Asking price: £3,635.00

Myford Super 7B long-bed lathe3.5" x 31"  with power cross feed, quick-change gearbox and mounted on the maker's late-type industrial stand with built-in electrical reversing switchgear. Serial number is SKL141099 - made between 1976 and 1979. Fitted with the correct 3/4 h.p. 1425 r.p.m. Crompton Parkinson Motor. Imperial (inch) dials to the cross slide, top slide and leadscrew handwheel. All-new drive belts just fitted together with a new spindle lubrication wick and wiper felt.

Well equipped with:

Location: Ipswich, United Kingdom
Asking price: £5,500.00

For Sale: a Superb Holbrook “Minor” High-precision Toolroom Lathe. This high-class, 5-inch centre height, variable-speed Holbrook was manufactured in 1968 and dispatched from new with a complete Hepworth hydraulic copying attachment. The lathe has been well looked after and has little to no wear. Professionally converted to run from a single-phase motor, it is still operated via the maker’s multi-function joystick controller.

Location: Whitby, United Kingdom
Asking price: £4,000.00

Myford Super 7 Lathe Serial No. SK 162720 (made between 1985 and 1988) in excellent condition, one owner from new. Single-phase. Myford quick-change gearbox, Power Cross feed, long tee-slotted cross slide. Mounted on Myford raising blocks on a substantial wooden cabinet with drip tray & cupboards. Myford 4-way toolpost,  standard toolpost & rear toolpost, thread-dial indicator. Fitted with GH Thomas design : 1) offset topslide handwheel and retracting topslide (for screwcutting)  2) adjustable cross slide handwheel 3) graduated tailstock dial 4) topslide lock.

Location: Stafford, United Kingdom
Asking price: £5,700.00

For Sale: a Hardinge HLV-H high-precision lathe Serial number 13724 T. Complete with an Acurite DRO, dual English/Metric screwcutting gearbox, power cross feed and infinitely-variable rates of sliding feed. Well equipped with a large set of collets on their original rotating circular housings, 4-jaw chuck, Multifix quick set toolpost with 12 toolholders, catchplate and a tailstock chuck. Can be viewed by appointment Monday to Thursday with loading facilities available. Full details of these high-class lathes here.

Location: Aylesbury, United Kingdom
Asking price: £650.00

A small capstan lathe by Accuratool mounted on the maker's underdrive cabinet stand. This high-precision turret lathe has been used by us for many years in the production of small parts; it's in full working order and running from a 1-phase supply. Complete with many useful accessories including, in addition to the usual cutting-off slide, a swivelling screw-feed slide with a 4-way toolpost, over 190 cutters, various toolholders, collets and packing. Runs very quietly and smoothly so ideal for a domestic-based installation..

Location: Bath, United Kingdom
Asking price: £595.00

Rivett 608 High-precision backgeared and screwcutting lathe 4.25" x 21.25". Fitted with taper turning and power cross feed. In full working order and can be demonstrated. Mounted on a solid homemade stand with an ingenious countershaft drive from a single-phase motor with reversing switch.

Location: United Kingdom
Asking price: £3,950.00

 Part built Horwich Crab chassis - a Don Young design are notable its fidelity to the prototype.
The sale includes  the main running chassis is essentially complete - frames, wheels, cylinders, all rods, pins and valve gear ready for stage of setting on compressed air).
    Don Young drawings.
    Bench-top swivelling erection frame.
    Pony Truck.
    Tender (wholly complete and painted).
    Smoke box wrapper incomplete.
    Cast iron for smokebox ring boiler (unfinished, more work required).

Location: United Kingdom
Asking price: £700.00

Elliott Victoria Milling machine with single-phase electrics. A very strong machine and in good, clean condition. Viewing and testing under power welcome.  Snag: one of the 3 bolts that hold the head in position is sheared off. I have been using it with just the 2, so that will need doing. Only selling as moving house. Please phone for more details.

Location: Abbess Roding (Essex), United Kingdom
Asking price: £375.00

Stent Tool & Cutter Grinder. An ideal machine for the small workshop - accurate and easy to use. Some details and additional pictures of these machines here

Location: United Kingdom
Asking price: £650.00

Sigma-Jones (BCA) Miniature Jig Borer/Driller. An early version of what was to become the BCA Jig Borer. A most useful and highly-accurate machine with a built-on rotary table sitting on a screw-feed compound slide. Single-phase motor and in full working order. Full details of these machines and their history can be found here

Location: United Kingdom
Asking price: £1,250.00

Centec 2A Vertical and Horizontal  Milling Machine with the rare swivelling "Universal" table. Mounted on the maker's cabinet stand with chip tray and fitted with the Mk.3 swivelling vertical head with both fine down-feed by handwheel and a rapid-action drilling feed by lever. An important addition to this miller is a 4-inch raising block that gives a much better clearance beteen head and table - and also allows the horizontal milling arbour to be added and removed without having to take off the vertical head.

Location: United Kingdom
Asking price: £1,250.00

Boxford Model A 4.5" x 28" long-bed lathe mounted on the maker's cabinet stand with chip tray, an imperial screwcutting gearbox, power cross feed, T-slotted cross slide and coolant. Sets of both inch and metric feed screws, nuts and dials are included.

Location: United Kingdom
Asking price: £1,650.00

Boxford Model C lathe 4.5" x 24" backgeared and screwcutting with 12 spindle speeds from a 1-phase motor with a Dewhurst reversing switch and emergency stop button. This was the long-time property of a retired RAF engineer and has been maintained in superb order with many small and useful modifications. It's offered complete with a mass of associated tooling and other workshop items that make work on the lathe a pleasure to use.

Location: Saffron Walden, United Kingdom
Asking price: £850.00

Boxford CUD Mk.2 Lathe 4.5" x 24" backgeared and screwcutting on the maker's underdrive cabinet stand with single-lever engagement of backgear. Single-phase electrics with an emergency foot-operated stop switch. Two 3-jaw chucks (one a new-new 6-inch TOS with both sets of jaws), the correct 6-inch diameter, half-depth body burned independent 4-jaw chuck, the maker's 4-way toolpost, Jacobs tailstock chuck, a new and unused faceplate, a separate bolt-on faceplate, thread-dial indicator and a chuck guard.

Location: Ripley, near Derby, United Kingdom
Asking price: £950.00

Raglan Little John Mk 2 Lathe 5" x 24” backgeared with a screwcutting gearbox, power cross feed, infinitely-variable speed drive from a 1-phase motor, hardened bedways and a 1-inch+ spindle bore. Mounted on the maker's cabinet stand with chip tray and cupboard and drawer storage. 3-jaw chuck, 6-inch Burnerd 4-jaw chuck, 4-way toolpost, faceplate, thread-dial indicator, tailstock chuck, tailstock capstan attachment and a good set of turning and boring tools, tool holders and Morse taper and other drills. The lathe is in full working and order and ready to use. £950

Location: Exeter, United Kingdom
Asking price: £1,250.00

Pultra 15/90R precision bench lathe bench mounted with storage drawers and drive system. This is the much larger Pultra and, being very expensive when new, very seldom found. Complete with screw-feed compound slide rest, tailstock with both screw and lever-feeds and a micrometer dial, a bed-mounted capstan unit and masses of capstan tooling and toolposts. The enclosed, underdrive system uses an infinitely variable speed 1-phase to 3-phase inverter with dial control of spindle speeds.

Location: Lancaster, United Kingdom
Asking price: £1,750.00

For Sale: one of the last ML7B lathes made circa late 1979, Serial K139037. Very little used, in its maker's paint finish and with a full history. This lathe has a screwcutting gearbox and incorporates all the late model improvements including the superior saddle-to bed arrangement. In superb, original condition 3.5" x 20" gap-bed, backgeared and screwing and mounted on the maker's cabinet stand with deep chip tray and bed-levelling blocks.

Location: Calver, near Bakewell, United Kingdom
Asking price: £395.00

For Sale: Warco WMT300 lathe. 6-inch centre height by 19 inches between centres and with a 26mm headstock spindle bore. 3-jaw chuck with internal and external jaws, 4-jaw chuck,fixed steady, travelling steady, 8-inch slotted faceplate and a robust No. 3 Morse taper set-over tailstock with drill chuck. Graduated handle to the leadscrew end, 4-way toolpost., T-slotted cross slide, 360-degree swivelling top slide. All the changewheels are present for both metric and imperial threadcutting.as are assorted lathe tools and Morse centres etc.

Location: Hertfordshire, United Kingdom
Asking price: £425.00

Perfecto 3.5" x 18" gap-bed, backgeared and screwcutting lathe in fine, original condition.  Little used, the Perfecto is a copy of the late-model Myford ML4 and comes with its original sale paperwork and brochures, a Burnerd 3-jaw chuck with internal and external jaws, the maker's countershaft with a single-phase motor, Dewhurst reversing switch and maker's chip tray.

Location: Hertfordshire, United Kingdom
Asking price: £1,650.00

Myford Super 7B lathe 3.5" x 19" gap-bed, backgeared and screwcutting. Fitted with a screwcutting gearbox and mounted on the maker's cabinet stand. Private use only and well equipped with: Myford swivelling milling slide, 3-jaw chuck, the correct half-depth body 6-inch independent 4 jaw chuck, fixed steady, travelling steady, quick-set and single toolposts, rear toolpost, two Myford V-blocks, two Myford angle plates, large faceplate, standard faceplate, thread-dial indicator and a surface plate scribing block.

Location: Grimsby, United Kingdom
Asking price: £350.00

Circa 1912 - 1921 Vintage Drummond B-Type flat-bed lathe 3.5" x 15" gap-bed, backgeared, screwcutting, compound slide rest assembly with a T-slotted cross slide and with adjustable, pre-set disengage to the carriage drive. In very smart condition and complete with changewheels, changewheel reversing stud for left-hand threads, 3-jaw chuck, a new 1-phase motor and the proper cast-iron chip tray. .

Location: Kingsley, Cheshire, United Kingdom
Asking price: £7,500.00

Harrison M250 lon-bed Lathe - ex-university. Little used, zero wear, no backlash, in immaculate order and taking 30-inches between centres. Complete with 3 and 4-jaw chucks, fixed steady, travelling steady, Dickson quick-set toolpost and two toolholders, dual inch/metric micrometer dials, coolant, thread-dial indicator, faceplate, Low-Vo light unit and a full-length splashback to the stand. £7500. Full details and specification of M250 lathes on this page

Location: Sevenoaks, United Kingdom
Asking price: £2,500.00

Myford Super 7B lathe 3.5" x 19" with a full screwcutting gearbox, power cross feed, gap-bed and mounted on the maker's cabinet stand with a deep chip tray, levelling blocks and  full-length splashback. Still in it's maker's paint finsh and lightly used.

Location: United Kingdom
Asking price: £2,200.00

Warco VMC VARIO Milling Machine. Mint condition having run for less than 1 hour. A reluctant sale having being new from Warco several months ago for my newly-built home workshop. Sadly, I can not afford to keep it as it is taking up a valuable corner space and I mainly use another smaller machine. It has been thoroughly cleaned and oiled and improved new way covers fitted (those supplied are a poor fit in my opinion).  It's essentially in factory condition with roughly 30 mins of test milling action in total and runs beautifully.

Location: Guildford, United Kingdom
Asking price: £975.00

Raglan Vertical Milling Machine mounted on the maker's cabinet stand with chip tray and storage cupboard. Although I have owned this lovely little miller for over 30 years, it has had very little use, is in perfect running order, has an unmarked table and is still in its maker's factory paint finish. Table 21" x 5.5" with 12" of longitudinal travel, 4" in traverse and 12" vertically. The micrometer dials are large and clearly engraved with a satin-chrome finish.

Location: Tideswell, Derbyshire, United Kingdom
Asking price: £1,950.00

For Sale: Colchester Chipmaster variable-speed lathe. Fully refurbished and fitted with electronically controlled variable speed drive. Complete with 3-jaw, 5-inch chuck, 4-jaw Independent chuck; the correct half-depth body 8-inch independent 4-jaw chuck; a 270mm diameter faceplate; a new " Dickson " style (RDG) tool post and 3 tool holders; 1-16 mm keyless tailstock chuck and a revolving centre.

Location: Thetford, United Kingdom
Asking price: £2,250.00

Emco FB2 Vertical Milling Machine mounted on the maker's cabinet stand with the optional large chip tray. Table 630 mm x 150 mm with engraved rulers on both axes; 380 mm of longitudinal travel, 140 mm in traverse and 370 mm clearance between the spindle nose and table. 6 all-geared spindle speeds from 120 to 2000 r.p.m. The No. Morse taper vertical head swivels through 350 degrees and has 40 mm of quill travel.

Location: Cambridgeshire, Bedfordshire border, United Kingdom
Asking price: £575.00

Rollo 6.5" x 30" all-geared headstock lathe with a full screwcutting gearbox and clutch control of the spindle. Made by Rollo Industries at the Barrmor Tool Works in Easdale, Scotland, the Roll 6.5-inch was a very heavily built, gap-bed lathe used in Army mobile workshops and manufactured until the mid 1950s. Fitted with a 3-jaw chuck, 4-way toolpost, faceplate and tailstock chuck, also inclued are a number of other items bar stock and cutting tools, etc. Compact and with a complete specification, drive comes from a motor, neatly contained within the cabinet base.

Location: Berwik-upon-Tweed, United Kingdom
Asking price: £3,125.00

Myford Super 7 BPXF Metric Lathe 3.5" x 19" (a rare top-of-the-range version) in very careful, little used condition and comprehensively equipped with a range of accessories. Fitted with the latest Newton Tesla AV750 inverter controlling a 1.0 HP motor (protected by a swarf guard), a screw-cutting gearbox, power cross-feed, graduated leadscrew handwheel, saddle-locking lever and thread-dial indicator. The unblemished paintwork is a joy to behold.

Location: Wigan, United Kingdom

Pages